main
Ray
Publish 0.1.0
6c4acba
MSP430G2210IDR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · SOIC-8
MSP430G2210IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Digital supply voltage, with the device operating range stated as 1.8 V to 3.6 V. |
| 2 | P1.2/TA0.1/CA2 | bidirectional | General-purpose digital I/O pin, also Timer_A capture CCI1A input and compare Out1 output, and Comparator_A+ CA2 input. |
| 3 | P1.5/TA0.0/CA5 | bidirectional | General-purpose digital I/O pin, also Timer_A compare Out0 output, and Comparator_A+ CA5 input. |
| 4 | P1.6/TA0.1/CA6 | bidirectional | General-purpose digital I/O pin, also Timer_A compare Out1 output, and Comparator_A+ CA6 input. |
| 5 | P1.7/CAOUT/CA7 | bidirectional | General-purpose digital I/O pin, also Comparator_A+ output CAOUT, and Comparator_A+ CA7 input. |
| 6 | RST/NMI/SBWTDIO | input | Reset input, which can also be configured as a nonmaskable interrupt input or as the Spy-Bi-Wire test data input/output during programming and test. |
| 7 | TEST/SBWTCK | input | Selects test mode for JTAG pins on Port 1, with the device protection fuse connected to TEST, and serves as Spy-Bi-Wire test clock input during programming and test. |
| 8 | DVSS | power_in | Digital ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | 14 | ||
| Voltage applied to any pin | -0.3 | V | Referenced to VSS; max printed as VCC + 0.3 V | 14 | |||
| Diode current at any device terminal | -2 | 2 | mA | 14 | |||
| Storage temperature (unprogrammed device) | Tstg | -55 | 150 | °C | Unprogrammed device | 14 | |
| Storage temperature (programmed device) | Tstg | -40 | 150 | °C | Programmed device | 14 | |
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | During program execution | 14 | |
| Supply voltage during flash program or erase | VCC | 2.2 | 3.6 | V | During flash program or erase | 14 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 14 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 6 | MHz | VCC = 1.8 V, duty cycle 50% ± 10% | 14 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 12 | MHz | VCC = 2.7 V, duty cycle 50% ± 10% | 14 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 16 | MHz | VCC ≥ 3.3 V, duty cycle 50% ± 10% | 14 | ||
| Active mode (AM) current (1 MHz) | IAM,1MHz | 300 | 370 | µA | VCC = 3 V; fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, CPUOFF = 0, SCG0 = 0, SCG1 = 0, OSCOFF = 0 | 15 | |
| Low-power mode 2 (LPM2) current | ILPM2 | 22 | 29 | µA | TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 0, SCG1 = 1, OSCOFF = 0 | 16 | |
| Low-power mode 3 (LPM3) current, VLO | ILPM3,VLO | 0.5 | 0.7 | µA | TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 | 16 | |
| Low-power mode 4 (LPM4) current | ILPM4 | 0.1 | 0.5 | µA | TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 16 | |
| Low-power mode 4 (LPM4) current | ILPM4 | 0.8 | 1.5 | µA | TA = 85°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 16 | |
| Positive-going input threshold voltage (Port P1) | VIT+ | 1.35 | 2.25 | V | VCC = 3 V | 17 | |
| Negative-going input threshold voltage (Port P1) | VIT- | 0.75 | 1.65 | V | VCC = 3 V | 17 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.3 | 1 | V | VCC = 3 V | 17 | |
| Pullup/pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; for pulldown: VIN = VCC | 17 |
| High-impedance leakage current (Port P1) | Ilkg(Px.y) | -50 | 50 | nA | VCC = 3 V | 17 | |
| Port output frequency (with load) | fPx.y | 12 | MHz | VCC = 3 V, CL = 20 pF, RL = 1 kΩ | 17 | ||
| Clock output frequency | fPort_CLK | 16 | MHz | VCC = 3 V, CL = 20 pF | 17 | ||
| Supply voltage for RSELx < 14 | VCC | 1.8 | 3.6 | V | RSELx < 14 | 21 | |
| Supply voltage for RSELx = 14 | VCC | 2.2 | 3.6 | V | RSELx = 14 | 21 | |
| Supply voltage for RSELx = 15 | VCC | 3 | 3.6 | V | RSELx = 15 | 21 | |
| 1-MHz tolerance overall | -5 | 5 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 1.8 V to 3.6 V | 22 | ||
| 8-MHz tolerance overall | -5 | 5 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 1.8 V to 3.6 V | 22 | ||
| 12-MHz tolerance overall | -5 | 5 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 2.2 V to 3.6 V | 22 | ||
| 16-MHz tolerance overall | -6 | 6 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 3 V to 3.6 V | 22 | ||
| 1-MHz tolerance over temperature | -3 | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 | ||
| 8-MHz tolerance over temperature | -3 | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 | ||
| 12-MHz tolerance over temperature | -3 | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 | ||
| 16-MHz tolerance over temperature | -3 | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 | ||
| 1-MHz tolerance over VCC | -3 | 3 | % | Calibrated at 30°C and 3 V; 25°C, 1.8 V to 3.6 V | 22 | ||
| 8-MHz tolerance over VCC | -3 | 3 | % | Calibrated at 30°C and 3 V; 25°C, 1.8 V to 3.6 V | 22 | ||
| 12-MHz tolerance over VCC | -3 | 3 | % | Calibrated at 30°C and 3 V; 25°C, 2.2 V to 3.6 V | 22 | ||
| 16-MHz tolerance over VCC | -6 | 3 | % | Calibrated at 30°C and 3 V; 25°C, 3 V to 3.6 V | 22 | ||
| VLO frequency | fVLO | 4 | 12 | 20 | kHz | -40°C to 85°C, VCC = 3 V | 24 |
| Common-mode input voltage | V(IC) | 0 | V | CAON = 1, VCC = 3 V; max printed as VCC-1 V | 25 | ||
| Offset voltage | V(offset) | -10 | 10 | mV | VCC = 3 V | 25 |
CAD (KiCad official)
- Symbol:
MSP430G2210IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
msp430g2210idr-etched.step/msp430g2210idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430g2210idr.step/msp430g2210idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
97290837e4d73839, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430G2210IDR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · SOIC-8
MSP430G2210IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Digital supply voltage, with the device operating range stated as 1.8 V to 3.6 V. |
| 2 | P1.2/TA0.1/CA2 | bidirectional | General-purpose digital I/O pin, also Timer_A capture CCI1A input and compare Out1 output, and Comparator_A+ CA2 input. |
| 3 | P1.5/TA0.0/CA5 | bidirectional | General-purpose digital I/O pin, also Timer_A compare Out0 output, and Comparator_A+ CA5 input. |
| 4 | P1.6/TA0.1/CA6 | bidirectional | General-purpose digital I/O pin, also Timer_A compare Out1 output, and Comparator_A+ CA6 input. |
| 5 | P1.7/CAOUT/CA7 | bidirectional | General-purpose digital I/O pin, also Comparator_A+ output CAOUT, and Comparator_A+ CA7 input. |
| 6 | RST/NMI/SBWTDIO | input | Reset input, which can also be configured as a nonmaskable interrupt input or as the Spy-Bi-Wire test data input/output during programming and test. |
| 7 | TEST/SBWTCK | input | Selects test mode for JTAG pins on Port 1, with the device protection fuse connected to TEST, and serves as Spy-Bi-Wire test clock input during programming and test. |
| 8 | DVSS | power_in | Digital ground reference. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VCC to VSS | VCC | -0.3 | | 4.1 | V | | 14 |
| Voltage applied to any pin | | -0.3 | | | V | Referenced to VSS; max printed as VCC + 0.3 V | 14 |
| Diode current at any device terminal | | -2 | | 2 | mA | | 14 |
| Storage temperature (unprogrammed device) | Tstg | -55 | | 150 | °C | Unprogrammed device | 14 |
| Storage temperature (programmed device) | Tstg | -40 | | 150 | °C | Programmed device | 14 |
| Supply voltage during program execution | VCC | 1.8 | | 3.6 | V | During program execution | 14 |
| Supply voltage during flash program or erase | VCC | 2.2 | | 3.6 | V | During flash program or erase | 14 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 14 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | | | 6 | MHz | VCC = 1.8 V, duty cycle 50% ± 10% | 14 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | | | 12 | MHz | VCC = 2.7 V, duty cycle 50% ± 10% | 14 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | | | 16 | MHz | VCC ≥ 3.3 V, duty cycle 50% ± 10% | 14 |
| Active mode (AM) current (1 MHz) | IAM,1MHz | | 300 | 370 | µA | VCC = 3 V; fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, CPUOFF = 0, SCG0 = 0, SCG1 = 0, OSCOFF = 0 | 15 |
| Low-power mode 2 (LPM2) current | ILPM2 | | 22 | 29 | µA | TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 0, SCG1 = 1, OSCOFF = 0 | 16 |
| Low-power mode 3 (LPM3) current, VLO | ILPM3,VLO | | 0.5 | 0.7 | µA | TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 | 16 |
| Low-power mode 4 (LPM4) current | ILPM4 | | 0.1 | 0.5 | µA | TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 16 |
| Low-power mode 4 (LPM4) current | ILPM4 | | 0.8 | 1.5 | µA | TA = 85°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 16 |
| Positive-going input threshold voltage (Port P1) | VIT+ | 1.35 | | 2.25 | V | VCC = 3 V | 17 |
| Negative-going input threshold voltage (Port P1) | VIT- | 0.75 | | 1.65 | V | VCC = 3 V | 17 |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | | 0.3 | 1 | V | VCC = 3 V | 17 |
| Pullup/pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; for pulldown: VIN = VCC | 17 |
| High-impedance leakage current (Port P1) | Ilkg(Px.y) | -50 | | 50 | nA | VCC = 3 V | 17 |
| Port output frequency (with load) | fPx.y | | | 12 | MHz | VCC = 3 V, CL = 20 pF, RL = 1 kΩ | 17 |
| Clock output frequency | fPort_CLK | | | 16 | MHz | VCC = 3 V, CL = 20 pF | 17 |
| Supply voltage for RSELx < 14 | VCC | 1.8 | | 3.6 | V | RSELx < 14 | 21 |
| Supply voltage for RSELx = 14 | VCC | 2.2 | | 3.6 | V | RSELx = 14 | 21 |
| Supply voltage for RSELx = 15 | VCC | 3 | | 3.6 | V | RSELx = 15 | 21 |
| 1-MHz tolerance overall | | -5 | | 5 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 1.8 V to 3.6 V | 22 |
| 8-MHz tolerance overall | | -5 | | 5 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 1.8 V to 3.6 V | 22 |
| 12-MHz tolerance overall | | -5 | | 5 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 2.2 V to 3.6 V | 22 |
| 16-MHz tolerance overall | | -6 | | 6 | % | Calibrated at 30°C and 3 V; I: -40°C to 85°C, 3 V to 3.6 V | 22 |
| 1-MHz tolerance over temperature | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 |
| 8-MHz tolerance over temperature | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 |
| 12-MHz tolerance over temperature | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 |
| 16-MHz tolerance over temperature | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V | 22 |
| 1-MHz tolerance over VCC | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 25°C, 1.8 V to 3.6 V | 22 |
| 8-MHz tolerance over VCC | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 25°C, 1.8 V to 3.6 V | 22 |
| 12-MHz tolerance over VCC | | -3 | | 3 | % | Calibrated at 30°C and 3 V; 25°C, 2.2 V to 3.6 V | 22 |
| 16-MHz tolerance over VCC | | -6 | | 3 | % | Calibrated at 30°C and 3 V; 25°C, 3 V to 3.6 V | 22 |
| VLO frequency | fVLO | 4 | 12 | 20 | kHz | -40°C to 85°C, VCC = 3 V | 24 |
| Common-mode input voltage | V(IC) | 0 | | | V | CAON = 1, VCC = 3 V; max printed as VCC-1 V | 25 |
| Offset voltage | V(offset) | -10 | | 10 | mV | VCC = 3 V | 25 |
## CAD (KiCad official)
- Symbol: `MSP430G2210IDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `msp430g2210idr-etched.step` / `msp430g2210idr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430g2210idr.step` / `msp430g2210idr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430g2210.pdf) (48 pp, sha256 `97290837e4d73839`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430g2210idr-datasheet.pdf)