component
MSP430FR2675TRHAR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMSP430FR2675TRHAR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-40-EP(6x6)
MSP430FR2675TRHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Supply voltage for the digital and analog modules, specified 1.8 V to 3.6 V in CapTIvate VREG electrode charge mode and 2.7 V to 3.6 V in DVCC electrode charge mode, with 4.7 µF to 10 µF recommended at DVCC. |
| 2 | RST/NMI/SBWTDIO | bidirectional | Reset input (RST, pullup enabled after BOR), NMI input, or Spy-Bi-Wire data I/O (SBWTDIO); an unused pin should be tied to DVCC through a 47-kΩ pullup or internal pullup with a 10-nF (or 1.1-nF) pulldown. |
| 3 | TEST/SBWTCK | input | Test mode pin that always has an internal pulldown enabled, and Spy-Bi-Wire clock input (SBWTCK); leave open if unused. |
| 4 | P1.4/UCA0TXD/UCA0SIMO/TA1.2/TCK/A4/VREF+ | bidirectional | General-purpose I/O P1.4 with alternate eUSCI_A0 TXD/SIMO, TA1.2, JTAG TCK, ADC input A4, and VREF+; when A4 is used the 1.2-V PMM reference can be output here. |
| 5 | P1.5/UCA0RXD/UCA0SOMI/TA1.1/TMS/A5 | bidirectional | General-purpose I/O P1.5 with alternate eUSCI_A0 RXD/SOMI, TA1.1, JTAG TMS, and ADC input A5. |
| 6 | P1.6/UCA0CLK/TA1CLK/TDI/TCLK/A6 | bidirectional | General-purpose I/O P1.6 with alternate eUSCI_A0 CLK, TA1CLK, JTAG TDI/TCLK, and ADC input A6. |
| 7 | P1.7/UCA0STE/SMCLK/TDO/A7 | bidirectional | General-purpose I/O P1.7 with alternate eUSCI_A0 STE, SMCLK output, JTAG TDO, and ADC input A7. |
| 8 | P4.3/UCB1SOMI/UCB1SCL/TB0.5/A8 | bidirectional | General-purpose I/O P4.3 with alternate eUSCI_B1 SOMI/SCL, TB0.5, and ADC input A8. |
| 9 | P4.4/UCB1SIMO/UCB1SDA/TB0.6/A9 | bidirectional | General-purpose I/O P4.4 with alternate eUSCI_B1 SIMO/SDA, TB0.6, and ADC input A9. |
| 10 | P1.0/UCB0STE/TA0CLK/A0/Veref+ | bidirectional | General-purpose I/O P1.0 with alternate eUSCI_B0 STE, TA0CLK, ADC input A0, and ADC positive reference Veref+. |
| 11 | P1.1/UCB0CLK/TA0.1/COMP0.0/A1 | bidirectional | General-purpose I/O P1.1 with alternate eUSCI_B0 CLK, TA0.1, eCOMP0 input COMP0.0, and ADC input A1. |
| 12 | P1.2/UCB0SIMO/UCB0SDA/TA0.2/A2/Veref- | bidirectional | General-purpose I/O P1.2 with alternate eUSCI_B0 SIMO/SDA, TA0.2, ADC input A2, and ADC negative reference Veref-. |
| 13 | P1.3/UCB0SOMI/UCB0SCL/MCLK/A3 | bidirectional | General-purpose I/O P1.3 with alternate eUSCI_B0 SOMI/SCL, MCLK output, and ADC input A3. |
| 14 | P2.2/SYNC/ACLK/COMP0.1 | bidirectional | General-purpose I/O P2.2 with alternate CapTIvate synchronous trigger input SYNC, ACLK output, and eCOMP0 input COMP0.1. |
| 15 | P4.5/UCB0SOMI/UCB0SCL/TA3.2 | bidirectional | General-purpose I/O P4.5 with remapped eUSCI_B0 SOMI/SCL and remapped Timer_A3 TA3.2 function. |
| 16 | P4.6/UCB0SIMO/UCB0SDA/TA3.1 | bidirectional | General-purpose I/O P4.6 with remapped eUSCI_B0 SIMO/SDA and remapped Timer_A3 TA3.1 function. |
| 17 | P3.0/TA2.2/CAP0.0 | bidirectional | General-purpose I/O P3.0 with alternate Timer_A2 TA2.2 and CapTIvate channel CAP0.0. |
| 18 | P3.3/TA2.1/CAP0.1 | bidirectional | General-purpose I/O P3.3 with alternate Timer_A2 TA2.1 and CapTIvate channel CAP0.1. |
| 19 | P2.3/TA2.0/CAP0.2 | bidirectional | General-purpose I/O P2.3 with alternate Timer_A2 TA2.0 and CapTIvate channel CAP0.2. |
| 20 | P3.4/TA2CLK/COMP0OUT/CAP0.3 | bidirectional | General-purpose I/O P3.4 with alternate Timer_A2 TA2CLK, eCOMP0 output COMP0OUT, and CapTIvate channel CAP0.3. |
| 21 | P3.1/UCA1STE/CAP1.0 | bidirectional | General-purpose I/O P3.1 with alternate eUSCI_A1 STE and CapTIvate channel CAP1.0. |
| 22 | P2.4/UCA1CLK/CAP1.1 | bidirectional | General-purpose I/O P2.4 with alternate eUSCI_A1 CLK and CapTIvate channel CAP1.1. |
| 23 | P2.5/UCA1RXD/UCA1SOMI/CAP1.2 | bidirectional | General-purpose I/O P2.5 with alternate eUSCI_A1 RXD/SOMI and CapTIvate channel CAP1.2. |
| 24 | P2.6/UCA1TXD/UCA1SIMO/CAP1.3 | bidirectional | General-purpose I/O P2.6 with alternate eUSCI_A1 TXD/SIMO and CapTIvate channel CAP1.3. |
| 25 | VREG | power_out | Decoupling pin for the CapTIvate regulator, which requires a recommended 1-µF capacitor with ESR ≤ 200 mΩ. |
| 26 | P3.7/TA3.2/CAP2.0 | bidirectional | General-purpose I/O P3.7 with alternate Timer_A3 TA3.2 and CapTIvate channel CAP2.0. |
| 27 | P4.0/TA3.1/CAP2.1 | bidirectional | General-purpose I/O P4.0 with alternate Timer_A3 TA3.1 and CapTIvate channel CAP2.1. |
| 28 | P4.1/TA3.0/CAP2.2 | bidirectional | General-purpose I/O P4.1 with alternate Timer_A3 TA3.0 and CapTIvate channel CAP2.2 (CapTIvate analog pad, powered from VREG). |
| 29 | P4.2/TA3CLK/CAP2.3 | bidirectional | General-purpose I/O P4.2 with alternate Timer_A3 TA3CLK and CapTIvate channel CAP2.3 (CapTIvate analog pad, powered from VREG). |
| 30 | P2.7/UCB1STE/CAP3.0 | bidirectional | General-purpose I/O P2.7 with alternate eUSCI_B1 STE and CapTIvate channel CAP3.0. |
| 31 | P3.5/UCB1CLK/TB0TRG/CAP3.1 | bidirectional | General-purpose I/O P3.5 with alternate eUSCI_B1 CLK, Timer_B TB0TRG trigger input, and CapTIvate channel CAP3.1. |
| 32 | P3.2/UCB1SIMO/UCB1SDA/CAP3.2 | bidirectional | General-purpose I/O P3.2 with alternate eUSCI_B1 SIMO/SDA and CapTIvate channel CAP3.2. |
| 33 | P3.6/UCB1SOMI/UCB1SCL/CAP3.3 | bidirectional | General-purpose I/O P3.6 with alternate eUSCI_B1 SOMI/SCL and CapTIvate channel CAP3.3. |
| 34 | P4.7/UCA0STE/TB0.1 | bidirectional | General-purpose I/O P4.7 with alternate eUSCI_A0 STE (remapped) and Timer_B TB0.1. |
| 35 | P5.0/UCA0CLK/TB0.2 | bidirectional | General-purpose I/O P5.0 with alternate eUSCI_A0 CLK (remapped) and Timer_B TB0.2. |
| 36 | P5.1/UCA0RXD/UCA0SOMI/TB0.3 | bidirectional | General-purpose I/O P5.1 with alternate eUSCI_A0 RXD/SOMI (remapped) and Timer_B TB0.3. |
| 37 | P5.2/UCA0TXD/UCA0SIMO/TB0.4 | bidirectional | General-purpose I/O P5.2 with alternate eUSCI_A0 TXD/SIMO (remapped) and Timer_B TB0.4. |
| 38 | P2.0/XOUT | output | Output terminal of the 32-kHz crystal oscillator; when XIN is driven by an external clock in XT1BYPASS mode, this pin can be used for other purposes. |
| 39 | P2.1/XIN | input | Input terminal of the low-frequency 32-kHz crystal oscillator, which also accepts a digital clock signal when XT1BYPASS mode is selected. |
| 40 | DVSS | power_in | Ground reference (VSS) for the digital and analog modules; TI recommends separated grounds with a single-point connection for analog accuracy. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40-EP(6x6) |
| Category | Embedded Processors & Controllers |
| Pins | 41 |
CAD (KiCad official)
- Symbol:
MSP430FR2675TRHAR - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
msp430fr2675trhar-etched.step/msp430fr2675trhar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430fr2675trhar.step/msp430fr2675trhar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (129 pp, sha256
98b202cd0699eba3, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).