← Commit history

Initial commit: component/msp430fr2311ipw16r

Ray ·e0ee603498 ·
2 files changed +244
README.mdadded+53
@@ -0,0 +1,53 @@+# MSP430FR2311IPW16R++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · TSSOP-16++MSP430FR2311IPW16R from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P1.1/UCB0CLK/ACLK/C1/A1 | bidirectional | General-purpose digital I/O P1.1 (LVCMOS, powered from DVCC, high-impedance after BOR); alternate functions are eUSCI_B0 SPI clock I/O (UCB0CLK), ACLK output, eCOMP0 comparator input C1, and ADC analog input A1. |+| 2 | P1.0/UCB0STE/SMCLK/C0/A0/Veref+ | bidirectional | General-purpose digital I/O P1.0; alternate functions are eUSCI_B0 SPI slave transmit enable (UCB0STE), SMCLK output, eCOMP0 comparator input C0, ADC analog input A0, and ADC positive external reference input Veref+. |+| 3 | TEST/SBWTCK | input | Test-mode select input that enables the JTAG pin functions when driven high (internal pulldown always enabled; leave open if unused); also functions as the Spy-Bi-Wire clock input (SBWTCK) for 2-wire programming/debug. |+| 4 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input (RST, default) that can be reconfigured as an edge-selectable non-maskable interrupt input (NMI); also serves as the bidirectional Spy-Bi-Wire data line (SBWTDIO) during 2-wire debug/programming; if unused, tie to DVCC through a 47-kΩ pullup with a 10-nF (or 1.1-nF for SBW) pulldown capacitor. |+| 5 | DVCC | power_in | Main digital/analog power-supply pin; recommended supply range is 1.8 V to 3.6 V with a 4.7 µF to 10 µF bulk capacitor plus a 100 nF low-ESR ceramic decoupling capacitor placed close to the pin. |+| 6 | DVSS | power_in | Digital and analog ground-supply pin (0 V reference for all other pin voltages). |+| 7 | P2.7/TB0CLK/XIN | bidirectional | General-purpose digital I/O P2.7 with pin-interrupt and LPM3.5/LPM4/LPM4.5 wake-up capability; alternate functions are Timer0_B3 external clock input (TB0CLK) and the crystal oscillator input terminal (XIN) for the LFXT/HFXT oscillator. |+| 8 | P2.6/MCLK/XOUT | bidirectional | General-purpose digital I/O P2.6; alternate functions are MCLK output and the crystal oscillator output terminal (XOUT) for the LFXT/HFXT oscillator. |+| 9 | P2.0/TB1.1/COUT | bidirectional | General-purpose digital I/O P2.0 with pin-interrupt and LPM3.5/LPM4/LPM4.5 wake-up capability; alternate functions are Timer1_B3 CCR1 capture/compare I/O (TB1.1) and the eCOMP0 comparator output (COUT). |+| 10 | P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/TRI0+/A7/VREF+ | bidirectional | General-purpose digital I/O P1.7 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 UART transmit (UCA0TXD) or SPI master-out data (UCA0SIMO), Timer0_B3 CCR2 capture/compare I/O (TB0.2), JTAG data output (TDO), TIA0 positive input (TRI0+), ADC analog input A7, and buffered 1.2-V reference voltage output (VREF+). |+| 11 | P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/A6 | bidirectional | General-purpose digital I/O P1.6 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 UART receive (UCA0RXD) or SPI slave-out data (UCA0SOMI), Timer0_B3 CCR1 capture/compare I/O (TB0.1), JTAG data input (TDI) or test clock (TCLK), and ADC analog input A6; note the TRI0- (TIA0 negative input) function present on this pin for the PW20/RGY packages is not available on the TSSOP-16 package, which instead provides a dedicated low-leakage TRI0- pin (pin 12). |+| 12 | TRI0- | input | Dedicated transimpedance amplifier (TIA0) negative input, unique to the TSSOP-16 package to provide low-leakage (5 pA typical) performance separate from any GPIO function; this is a high-impedance input and should be left open if unused. |+| 13 | P1.5/UCA0CLK/TMS/TRI0O/A5 | bidirectional | General-purpose digital I/O P1.5 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 SPI clock I/O (UCA0CLK), JTAG test-mode select (TMS), TIA0 output (TRI0O), and ADC analog input A5. |+| 14 | P1.4/UCA0STE/TCK/OA0+/A4 | bidirectional | General-purpose digital I/O P1.4 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 SPI slave transmit enable (UCA0STE), JTAG test clock input (TCK), SAC0 operational-amplifier positive input (OA0+), and ADC analog input A4. |+| 15 | P1.3/UCB0SOMI/UCB0SCL/OA0O/A3 | bidirectional | General-purpose digital I/O P1.3; alternate functions are eUSCI_B0 SPI slave-out data (UCB0SOMI) or I2C clock (UCB0SCL), SAC0 operational-amplifier output (OA0O), and ADC analog input A3. |+| 16 | P1.2/UCB0SIMO/UCB0SDA/TB0TRG/OA0-/A2/Veref- | bidirectional | General-purpose digital I/O P1.2; alternate functions are eUSCI_B0 SPI master-out data (UCB0SIMO) or I2C data (UCB0SDA), Timer0_B3 external high-impedance trigger input (TB0TRG), SAC0 operational-amplifier negative input (OA0-), ADC analog input A2, and ADC negative external reference input Veref-. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Embedded Processors & Controllers |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `MSP430FR2311IPW16R`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `msp430fr2311ipw16r-etched.step` / `msp430fr2311ipw16r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430fr2311ipw16r.step` / `msp430fr2311ipw16r.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430fr2311) (99 pp, sha256 `ace23ae4fc6ae702`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430fr2311ipw16r-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "msp430fr2311ipw16r",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "msp430fr2311ipw16r",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "msp430fr2311ipw16r.kicad_sym",+    "msp430fr2311ipw16r.kicad_mod",+    "msp430fr2311ipw16r.glb",+    "msp430fr2311ipw16r.step",+    "msp430fr2311ipw16r.lbr",+    "docs/hero.png",+    "docs/msp430fr2311ipw16r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MSP430FR2311IPW16R",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/msp430fr2311",+    "parts": {+      "symbol": "msp430fr2311ipw16r.kicad_sym",+      "footprint": "msp430fr2311ipw16r.kicad_mod",+      "model_3d": "msp430fr2311ipw16r-etched.glb",+      "model_3d_plain": "msp430fr2311ipw16r.glb",+      "model_3d_step": "msp430fr2311ipw16r-etched.step",+      "model_3d_step_plain": "msp430fr2311ipw16r.step",+      "lbr": "msp430fr2311ipw16r.lbr"+    },+    "distributor_links": {+      "lcsc": "C125129"+    },+    "pins": [+      {+        "number": "1",+        "name": "P1.1/UCB0CLK/ACLK/C1/A1",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.1 (LVCMOS, powered from DVCC, high-impedance after BOR); alternate functions are eUSCI_B0 SPI clock I/O (UCB0CLK), ACLK output, eCOMP0 comparator input C1, and ADC analog input A1."+      },+      {+        "number": "2",+        "name": "P1.0/UCB0STE/SMCLK/C0/A0/Veref+",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.0; alternate functions are eUSCI_B0 SPI slave transmit enable (UCB0STE), SMCLK output, eCOMP0 comparator input C0, ADC analog input A0, and ADC positive external reference input Veref+."+      },+      {+        "number": "3",+        "name": "TEST/SBWTCK",+        "type": "input",+        "description": "Test-mode select input that enables the JTAG pin functions when driven high (internal pulldown always enabled; leave open if unused); also functions as the Spy-Bi-Wire clock input (SBWTCK) for 2-wire programming/debug."+      },+      {+        "number": "4",+        "name": "RST/NMI/SBWTDIO",+        "type": "bidirectional",+        "description": "Active-low reset input (RST, default) that can be reconfigured as an edge-selectable non-maskable interrupt input (NMI); also serves as the bidirectional Spy-Bi-Wire data line (SBWTDIO) during 2-wire debug/programming; if unused, tie to DVCC through a 47-kΩ pullup with a 10-nF (or 1.1-nF for SBW) pulldown capacitor."+      },+      {+        "number": "5",+        "name": "DVCC",+        "type": "power_in",+        "description": "Main digital/analog power-supply pin; recommended supply range is 1.8 V to 3.6 V with a 4.7 µF to 10 µF bulk capacitor plus a 100 nF low-ESR ceramic decoupling capacitor placed close to the pin."+      },+      {+        "number": "6",+        "name": "DVSS",+        "type": "power_in",+        "description": "Digital and analog ground-supply pin (0 V reference for all other pin voltages)."+      },+      {+        "number": "7",+        "name": "P2.7/TB0CLK/XIN",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P2.7 with pin-interrupt and LPM3.5/LPM4/LPM4.5 wake-up capability; alternate functions are Timer0_B3 external clock input (TB0CLK) and the crystal oscillator input terminal (XIN) for the LFXT/HFXT oscillator."+      },+      {+        "number": "8",+        "name": "P2.6/MCLK/XOUT",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P2.6; alternate functions are MCLK output and the crystal oscillator output terminal (XOUT) for the LFXT/HFXT oscillator."+      },+      {+        "number": "9",+        "name": "P2.0/TB1.1/COUT",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P2.0 with pin-interrupt and LPM3.5/LPM4/LPM4.5 wake-up capability; alternate functions are Timer1_B3 CCR1 capture/compare I/O (TB1.1) and the eCOMP0 comparator output (COUT)."+      },+      {+        "number": "10",+        "name": "P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/TRI0+/A7/VREF+",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.7 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 UART transmit (UCA0TXD) or SPI master-out data (UCA0SIMO), Timer0_B3 CCR2 capture/compare I/O (TB0.2), JTAG data output (TDO), TIA0 positive input (TRI0+), ADC analog input A7, and buffered 1.2-V reference voltage output (VREF+)."+      },+      {+        "number": "11",+        "name": "P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/A6",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.6 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 UART receive (UCA0RXD) or SPI slave-out data (UCA0SOMI), Timer0_B3 CCR1 capture/compare I/O (TB0.1), JTAG data input (TDI) or test clock (TCLK), and ADC analog input A6; note the TRI0- (TIA0 negative input) function present on this pin for the PW20/RGY packages is not available on the TSSOP-16 package, which instead provides a dedicated low-leakage TRI0- pin (pin 12)."+      },+      {+        "number": "12",+        "name": "TRI0-",+        "type": "input",+        "description": "Dedicated transimpedance amplifier (TIA0) negative input, unique to the TSSOP-16 package to provide low-leakage (5 pA typical) performance separate from any GPIO function; this is a high-impedance input and should be left open if unused."+      },+      {+        "number": "13",+        "name": "P1.5/UCA0CLK/TMS/TRI0O/A5",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.5 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 SPI clock I/O (UCA0CLK), JTAG test-mode select (TMS), TIA0 output (TRI0O), and ADC analog input A5."+      },+      {+        "number": "14",+        "name": "P1.4/UCA0STE/TCK/OA0+/A4",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.4 (shared with JTAG; TI recommends disabling the pin interrupt during JTAG debug); alternate functions are eUSCI_A0 SPI slave transmit enable (UCA0STE), JTAG test clock input (TCK), SAC0 operational-amplifier positive input (OA0+), and ADC analog input A4."+      },+      {+        "number": "15",+        "name": "P1.3/UCB0SOMI/UCB0SCL/OA0O/A3",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.3; alternate functions are eUSCI_B0 SPI slave-out data (UCB0SOMI) or I2C clock (UCB0SCL), SAC0 operational-amplifier output (OA0O), and ADC analog input A3."+      },+      {+        "number": "16",+        "name": "P1.2/UCB0SIMO/UCB0SDA/TB0TRG/OA0-/A2/Veref-",+        "type": "bidirectional",+        "description": "General-purpose digital I/O P1.2; alternate functions are eUSCI_B0 SPI master-out data (UCB0SIMO) or I2C data (UCB0SDA), Timer0_B3 external high-impedance trigger input (TB0TRG), SAC0 operational-amplifier negative input (OA0-), ADC analog input A2, and ADC negative external reference input Veref-."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 12 (P1.6/TRI0-) has a dedicated low-leakage pad in TSSOP-16 package variant per datasheet sectio"+        ],+        "pages_sent": 99,+        "cost_usd": 1.126,+        "at": "2026-09-22T19:34:31"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/msp430fr2311",+        "pages": 99,+        "sha256": "ace23ae4fc6ae702",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file