main
Ray Publish 0.1.0 8d5c475

MSP430FR2155TPTR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

MSP430FR2155TPTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.2/UCB0SIMO/UCB0SDA/TB0TRG/A2/Veref- bidirectional General-purpose I/O (reset default OFF) multiplexed with eUSCI_B0 SIMO/SDA, TB0 external trigger, ADC channel A2 and ADC negative reference Veref-.
2 P1.1/UCB0CLK/ACLK/COMP0.1/A1 bidirectional General-purpose I/O (reset default OFF) multiplexed with eUSCI_B0 clock, ACLK output, eCOMP0 input C1 and ADC channel A1.
3 P1.0/UCB0STE/SMCLK/COMP0.0/A0/Veref+ bidirectional General-purpose I/O (reset default OFF) multiplexed with eUSCI_B0 STE, SMCLK output, eCOMP0 input C0, ADC channel A0 and ADC positive reference Veref+.
4 TEST/SBWTCK input Test mode pin used for JTAG/Spy-Bi-Wire clock; it always has an internal pulldown enabled and is left open when unused.
5 RST/NMI/SBWTDIO bidirectional Reset input (reset default OFF) that can also serve as NMI and Spy-Bi-Wire data; unused it is tied to DVCC through 47 kΩ pullup or the internal pullup with a 10 nF (or 1.1 nF) pulldown.
6 DVCC power_in Supply voltage pin, specified from 1.8 V to 3.6 V with a recommended 4.7 µF to 10 µF capacitor at DVCC.
7 DVSS power_in Ground reference pin; all voltages are referenced to VSS.
8 P2.7/TB0CLK/XIN bidirectional General-purpose I/O multiplexed with TB0 clock input and the input terminal for the external crystal oscillator.
9 P2.6/MCLK/XOUT bidirectional General-purpose I/O multiplexed with the MCLK output and the output terminal for the external crystal oscillator.
10 P2.5/COMP1.0 bidirectional General-purpose I/O multiplexed with eCOMP1 input C0.
11 P2.4/COMP1.1 bidirectional General-purpose I/O multiplexed with eCOMP1 input C1.
12 P4.7/UCB1SOMI/UCB1SCL bidirectional General-purpose I/O multiplexed with eUSCI_B1 SOMI or I2C SCL.
13 P4.6/UCB1SIMO/UCB1SDA bidirectional General-purpose I/O multiplexed with eUSCI_B1 SIMO or I2C SDA.
14 P4.5/UCB1CLK bidirectional General-purpose I/O multiplexed with eUSCI_B1 clock.
15 P4.4/UCB1STE bidirectional General-purpose I/O multiplexed with eUSCI_B1 STE.
16 P6.6/TB3CLK bidirectional General-purpose I/O multiplexed with the TB3 timer clock input.
17 P6.5/TB3.6 bidirectional General-purpose I/O multiplexed with Timer_B3 CCR6 capture/compare.
18 P6.4/TB3.5 bidirectional General-purpose I/O multiplexed with Timer_B3 CCR5 capture/compare.
19 P6.3/TB3.4 bidirectional General-purpose I/O multiplexed with Timer_B3 CCR4 capture/compare.
20 P6.2/TB3.3 bidirectional General-purpose I/O multiplexed with Timer_B3 CCR3 capture/compare.
21 P6.1/TB3.2 bidirectional General-purpose I/O multiplexed with Timer_B3 CCR2 capture/compare.
22 P6.0/TB3.1 bidirectional General-purpose I/O multiplexed with Timer_B3 CCR1 capture/compare.
23 P4.3/UCA1TXD/UCA1SIMO bidirectional General-purpose I/O multiplexed with eUSCI_A1 UART TXD or SPI SIMO.
24 P4.2/UCA1RXD/UCA1SOMI bidirectional General-purpose I/O multiplexed with eUSCI_A1 UART RXD or SPI SOMI.
25 P4.1/UCA1CLK bidirectional General-purpose I/O multiplexed with eUSCI_A1 clock.
26 P4.0/UCA1STE/ISOTXD/ISORXD bidirectional General-purpose I/O multiplexed with eUSCI_A1 STE and the ISO transmit/receive functions.
27 P2.3/TB1TRG bidirectional General-purpose I/O multiplexed with the TB1 external trigger input.
28 P2.2/TB1CLK bidirectional General-purpose I/O multiplexed with the TB1 timer clock input.
29 P2.1/TB1.2/COMP1.O bidirectional General-purpose I/O multiplexed with Timer_B1 CCR2 and eCOMP1 output.
30 P2.0/TB1.1/COMP0.O bidirectional General-purpose I/O multiplexed with Timer_B1 CCR1 and eCOMP0 output.
31 P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/A7/VREF+ bidirectional General-purpose I/O multiplexed with eUSCI_A0 TXD or SIMO, Timer_B0 CCR2, JTAG TDO, ADC channel A7 and VREF+.
32 P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/A6 bidirectional General-purpose I/O multiplexed with eUSCI_A0 RXD or SOMI, Timer_B0 CCR1, JTAG TDI/TCLK and ADC channel A6.
33 P1.5/UCA0CLK/TMS/A5 bidirectional General-purpose I/O multiplexed with eUSCI_A0 clock, JTAG TMS and ADC channel A5.
34 P1.4/UCA0STE/TCK/A4 bidirectional General-purpose I/O multiplexed with eUSCI_A0 STE, JTAG TCK and ADC channel A4.
35 P3.7 bidirectional General-purpose I/O with no secondary function on this FR215x device.
36 P3.6 bidirectional General-purpose I/O with no secondary function on this FR215x device.
37 P3.5 bidirectional General-purpose I/O with no secondary function on this FR215x device.
38 P3.4/SMCLK bidirectional General-purpose I/O multiplexed with the SMCLK output.
39 P5.4 bidirectional General-purpose I/O.
40 P5.3/TB2TRG/A11 bidirectional General-purpose I/O multiplexed with the TB2 external trigger input and ADC channel A11.
41 P5.2/TB2CLK/A10 bidirectional General-purpose I/O multiplexed with the TB2 timer clock input and ADC channel A10.
42 P5.1/TB2.2/MFM.TX/A9 bidirectional General-purpose I/O multiplexed with Timer_B2 CCR2, Manchester module transmit and ADC channel A9.
43 P5.0/TB2.1/MFM.RX/A8 bidirectional General-purpose I/O multiplexed with Timer_B2 CCR1, Manchester module receive and ADC channel A8.
44 P3.3 bidirectional General-purpose I/O with no secondary function on this FR215x device.
45 P3.2 bidirectional General-purpose I/O with no secondary function on this FR215x device.
46 P3.1 bidirectional General-purpose I/O with no secondary function on this FR215x device.
47 P3.0/MCLK bidirectional General-purpose I/O multiplexed with the MCLK output.
48 P1.3/UCB0SOMI/UCB0SCL/A3 bidirectional General-purpose I/O multiplexed with eUSCI_B0 SOMI or I2C SCL and ADC channel A3.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at DVCC pin to VSS -0.3 4.1 V Grade T 27
Voltage applied to any pin -0.3 4.1 V Referenced to VSS; printed as VCC + 0.3 V with 4.1 V maximum 27
Current across the whole chip including IO currents 50 mA Grade T 27
Diode current at any device pin -2 2 mA Grade T 27
Maximum junction temperature TJ 115 °C Grade T 27
Storage temperature Tstg -40 125 °C Grade T 27
Supply voltage applied at DVCC pin VCC 1.8 3.6 V Grade T 27
Operating free-air temperature TA -40 105 °C Grade T 27
Operating junction temperature TJ -40 115 °C Grade T 27
Recommended capacitor at DVCC CDVCC 4.7 10 µF Grade T 27
Processor frequency (maximum MCLK frequency), no FRAM wait states fSYSTEM 0 8 MHz NWAITSx = 0 27
Processor frequency (maximum MCLK frequency), with FRAM wait states fSYSTEM 0 16 MHz NWAITSx = 1 27
Processor frequency (maximum MCLK frequency), with FRAM wait states fSYSTEM 0 24 MHz NWAITSx = 2 27
Maximum ACLK frequency fACLK 40 kHz Grade T 28
Maximum SMCLK frequency fSMCLK 24 MHz Grade T 28
ADC supply voltage DVCC 2 3.6 V Grade T 51
Positive-going input threshold voltage VIT+ 1.35 2.25 V VCC = 3.0 V 43
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3.0 V 43
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.4 1.2 V VCC = 3.0 V 43
Positive-going input threshold voltage VIT+ 0.9 1.5 V VCC = 2.0 V 43
Negative-going input threshold voltage VIT- 0.5 1.1 V VCC = 2.0 V 43
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.3 0.8 V VCC = 2.0 V 43
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup VIN = VSS, for pulldown VIN = VCC 43
High-level output voltage VOH 2.4 3 V I(OHmax) = -5 mA, VCC = 3.0 V 43
High-level output voltage VOH 1.4 2 V I(OHmax) = -3 mA, VCC = 2.0 V 43
Low-level output voltage VOL 0 0.6 V I(OLmax) = 3 mA, VCC = 2.0 V 43
Digital input high-impedance leakage current Ilkg(Px.y) -30 30 nA VCC = 2.0 V, 3.0 V 43
External interrupt timing (external trigger pulse duration to set interrupt flag) t(int) 50 ns VCC = 2.0 V, 3.0 V 43
SVSH power-down level VSVSH- 1.71 1.8 1.87 V 33
SVSH power-up level VSVSH+ 1.76 1.88 1.99 V 33
FLL lock frequency, 24 MHz, 25°C fDCO,FLL -1 1 % Measured at MCLK, internal trimmed REFO reference, VCC 3.0 V 37
FLL lock frequency, 24 MHz fDCO,FLL -2 2 % Measured at MCLK, internal trimmed REFO reference, VCC 3.0 V 37
FLL lock frequency, 24 MHz fDCO,FLL -0.5 0.5 % Measured at MCLK, XT1 crystal as reference, VCC 3.0 V 37
Duty cycle fDUTY 40 50 60 % Measured at MCLK, XT1 crystal as reference, VCC 3.0 V 37
REFO absolute calibrated tolerance -3.5 3.5 % -40°C to 105°C, VCC 1.8 V to 3.6 V 40
MODOSC frequency fMODOSC 3 3.8 4.6 MHz VCC 3.0 V 41
Internal reference, built-in positive reference voltage 2.5 V tolerance VREF+ -1.5 1.5 % REFVSEL = {2} for 2.5 V, INTREFEN = 1, VCC 3.0 V 41
Internal reference, built-in positive reference voltage 2.0 V tolerance VREF+ -1.5 1.5 % REFVSEL = {1} for 2.0 V, INTREFEN = 1, VCC 2.5 V 41
Internal reference, built-in positive reference voltage 1.5 V tolerance VREF+ -1.8 1.8 % REFVSEL = {0} for 1.5 V, INTREFEN = 1, VCC 1.8 V 41
Operating supply current into DVCC terminal (internal reference) IREF+ 19 26 µA INTREFEN = 1, VCC 3 V 41
Input offset voltage VOFFSET -30 30 mV eCOMP0, CPEN = 1, CPMSEL = 0 53
Input offset voltage VOFFSET -30 30 mV eCOMP1, CPEN = 1, CPMSEL = 0 54
eCOMP supply voltage VCC 2 3.6 V eCOMP0 53
eCOMP supply voltage VCC 2 3.6 V eCOMP1 54
Integral nonlinearity INL -0.5 0.5 LSB eCOMP0 53
Differential nonlinearity DNL -0.5 0.5 LSB eCOMP0 53
Integral linearity error (12-bit mode) EI -2.5 2.5 LSB Veref+ reference, VCC 2.4 V to 3.6 V 52
Differential linearity error (12-bit mode) ED -1 1 LSB Veref+ reference, VCC 2.4 V to 3.6 V 52
Offset error (12-bit mode) EO -1.5 1.5 mV Veref+ reference, VCC 2.4 V to 3.6 V 52
Gain error (12-bit mode) EG -3 3 LSB Veref+ as reference, VCC 2.4 V to 3.6 V 52
Total unadjusted error (12-bit mode) ET -4 4 LSB Veref+ as reference, VCC 2.4 V to 3.6 V 52
ADC clock frequency, 10-bit mode fADCCLK 6 MHz VCC 2.4 V to 3.6 V 51
ADC clock frequency, 12-bit mode fADCCLK 4.4 MHz VCC 2.4 V to 3.6 V 51
Timer_B input clock frequency fTB 24 MHz Internal SMCLK or ACLK, external TBCLK with duty cycle 50% ±10% 45
Timer_B capture timing, minimum pulse duration tTB,cap 20 ns All capture inputs, VCC 2.0 V, 3.0 V 45
eUSCI input clock frequency (UART mode) feUSCI 24 MHz Internal SMCLK or MODCLK, external UCLK, duty cycle 50% ±10% 45
BITCLK clock frequency (equals baud rate in Mbaud) fBITCLK 5 MHz VCC 2.0 V, 3.0 V 45
SPI master eUSCI input clock frequency feUSCI 8 MHz Internal SMCLK, duty cycle 50% ±10% 46
Spy-Bi-Wire input frequency fSBW 0 8 MHz VCC 2.0 V, 3.0 V 58
Spy-Bi-Wire low clock pulse duration tSBW,Low 0.028 15 µs VCC 2.0 V, 3.0 V 58
TCK input frequency fTCK 0 10 MHz VCC 2.0 V, 3.0 V 59
Junction-to-ambient thermal resistance, still air, QFP 48 pin (PT) RθJA 67.6 ºC/W JEDEC 2S2P board 32
Junction-to-case (top) thermal resistance, QFP 48 pin (PT) RθJC 24 ºC/W JEDEC 1S0P board 32
Junction-to-board thermal resistance, QFP 48 pin (PT) RθJB 31.6 ºC/W 32
Active mode active current per MHz, execution from FRAM, no wait states dIAM,FRAM/df 142 µA/MHz VCC = 3.0 V, TA = 25°C 28
Internal very-low-power low-frequency oscillator frequency (VLO) fVLO 10 kHz Measured at MCLK, VCC 3.0 V 40
REFO calibrated frequency fREFO 32768 Hz Measured at MCLK, VCC 3.0 V 40
Safe BOR reset delay tBOR,safe 10 ms 33
SVSH hysteresis VSVSH_hys 100 mV 33
Input capacitance, digital only port pins CI,dig 3 pF VIN = VSS or VCC 43
Temperature sensor voltage VSENSOR 788 mV TJ = 30°C, VCC 2.0 V, 3.0 V 41
Temperature sensor coefficient TCSENSOR 2.32 mV/°C TJ = 30°C 41

CAD (KiCad official)

  • Symbol: MSP430FR2155TPTR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: msp430fr2155tptr-etched.step / msp430fr2155tptr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430fr2155tptr.step / msp430fr2155tptr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (146 pp, sha256 13bb599d63348825, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF