← Commit history

Initial commit: component/msp430fr2100ipw16r

Ray ·4845a36737 ·
2 files changed +242
README.mdadded+53
@@ -0,0 +1,53 @@+# MSP430FR2100IPW16R++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · TSSOP-16++MSP430FR2100IPW16R from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P1.1 | bidirectional | P1.1 general-purpose I/O pin, configurable as UCA0CLK (eUSCI_A0 SPI clock), ACLK (auxiliary clock output), C1 (eCOMP0 input), or A1 (ADC input channel). |+| 2 | P1.0 | bidirectional | P1.0 general-purpose I/O pin, configurable as UCA0STE (eUSCI_A0 SPI slave transmit enable), SMCLK (submain clock output), C0 (eCOMP0 input), A0 (ADC input), or Veref+ (ADC positive reference). |+| 3 | TEST | input | Test mode input pin with internal pull-down resistor; enables JTAG/Spy-Bi-Wire debug interface when held high. |+| 4 | RST | bidirectional | Reset input (active low, minimum pulse width 2 µs) configurable as NMI (non-maskable interrupt) or SBWTDIO (Spy-Bi-Wire data I/O); internal pull-up or pull-down resistor selectable. |+| 5 | DVCC | power_in | Digital power supply input voltage (1.8 V to 3.6 V); recommended decoupling with 10 µF bulk capacitor and 100 nF ceramic capacitor placed within few millimeters of pin. |+| 6 | DVSS | power_in | Digital power supply ground; must be connected to system ground plane. |+| 7 | P2.7 | bidirectional | P2.7 general-purpose I/O pin, configurable as TB0CLK (Timer_B0 clock input) or XIN (32 kHz crystal oscillator input). |+| 8 | P2.6 | bidirectional | P2.6 general-purpose I/O pin, configurable as MCLK (main clock output) or XOUT (32 kHz crystal oscillator output). |+| 9 | P2.1 | bidirectional | P2.1 general-purpose I/O pin, configurable as TB0.2 (Timer_B0 CCR2 for capture/compare or PWM output) via TBRMP remapping. |+| 10 | P2.0 | bidirectional | P2.0 general-purpose I/O pin, configurable as TB0.1 (Timer_B0 CCR1 for capture/compare or PWM output) or COUT (eCOMP0 comparator output). |+| 11 | P1.7 | bidirectional | P1.7 general-purpose I/O pin, configurable as UCA0TXD (UART transmit/SPI SIMO), TB0.2 (Timer_B0 capture/compare or PWM), TDO (JTAG data output), A7 (ADC input), or VREF+ (1.2 V reference voltage output when EXTREFEN=1). |+| 12 | P1.6 | bidirectional | P1.6 general-purpose I/O pin, configurable as UCA0RXD (UART receive/SPI SOMI), TB0.1 (Timer_B0 capture/compare or PWM), TDI (JTAG data input), TCLK (JTAG clock), or A6 (ADC input); TI recommends disabling pin interrupts during JTAG debugging. |+| 13 | P1.5 | bidirectional | P1.5 general-purpose I/O pin, configurable as UCA0CLK (eUSCI_A0 SPI clock), TMS (JTAG test mode select), or A5 (ADC input); TI recommends disabling pin interrupts during JTAG debugging. |+| 14 | P1.4 | bidirectional | P1.4 general-purpose I/O pin, configurable as UCA0STE (eUSCI_A0 SPI slave transmit enable), TCK (JTAG clock input), or A4 (ADC input); TI recommends disabling pin interrupts during JTAG debugging. |+| 15 | P1.3 | bidirectional | P1.3 general-purpose I/O pin, configurable as UCA0TXD (UART transmit/SPI SIMO), C3 (eCOMP0 input), or A3 (ADC input). |+| 16 | P1.2 | bidirectional | P1.2 general-purpose I/O pin, configurable as UCA0RXD (UART receive/SPI SOMI), TB0TRG (Timer_B0 external trigger input), C2 (eCOMP0 input), A2 (ADC input), or Veref- (ADC negative reference). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Embedded Processors & Controllers |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `MSP430FR2100IPW16R`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `msp430fr2100ipw16r-etched.step` / `msp430fr2100ipw16r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430fr2100ipw16r.step` / `msp430fr2100ipw16r.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430fr2111) (87 pp, sha256 `7505f67fee2c23fa`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430fr2100ipw16r-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "msp430fr2100ipw16r",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "msp430fr2100ipw16r",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "msp430fr2100ipw16r.kicad_sym",+    "msp430fr2100ipw16r.kicad_mod",+    "msp430fr2100ipw16r.glb",+    "msp430fr2100ipw16r.step",+    "msp430fr2100ipw16r.lbr",+    "docs/hero.png",+    "docs/msp430fr2100ipw16r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MSP430FR2100IPW16R",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/msp430fr2111",+    "parts": {+      "symbol": "msp430fr2100ipw16r.kicad_sym",+      "footprint": "msp430fr2100ipw16r.kicad_mod",+      "model_3d": "msp430fr2100ipw16r-etched.glb",+      "model_3d_plain": "msp430fr2100ipw16r.glb",+      "model_3d_step": "msp430fr2100ipw16r-etched.step",+      "model_3d_step_plain": "msp430fr2100ipw16r.step",+      "lbr": "msp430fr2100ipw16r.lbr"+    },+    "distributor_links": {+      "lcsc": "C2870878"+    },+    "pins": [+      {+        "number": "1",+        "name": "P1.1",+        "type": "bidirectional",+        "description": "P1.1 general-purpose I/O pin, configurable as UCA0CLK (eUSCI_A0 SPI clock), ACLK (auxiliary clock output), C1 (eCOMP0 input), or A1 (ADC input channel)."+      },+      {+        "number": "2",+        "name": "P1.0",+        "type": "bidirectional",+        "description": "P1.0 general-purpose I/O pin, configurable as UCA0STE (eUSCI_A0 SPI slave transmit enable), SMCLK (submain clock output), C0 (eCOMP0 input), A0 (ADC input), or Veref+ (ADC positive reference)."+      },+      {+        "number": "3",+        "name": "TEST",+        "type": "input",+        "description": "Test mode input pin with internal pull-down resistor; enables JTAG/Spy-Bi-Wire debug interface when held high."+      },+      {+        "number": "4",+        "name": "RST",+        "type": "bidirectional",+        "description": "Reset input (active low, minimum pulse width 2 µs) configurable as NMI (non-maskable interrupt) or SBWTDIO (Spy-Bi-Wire data I/O); internal pull-up or pull-down resistor selectable."+      },+      {+        "number": "5",+        "name": "DVCC",+        "type": "power_in",+        "description": "Digital power supply input voltage (1.8 V to 3.6 V); recommended decoupling with 10 µF bulk capacitor and 100 nF ceramic capacitor placed within few millimeters of pin."+      },+      {+        "number": "6",+        "name": "DVSS",+        "type": "power_in",+        "description": "Digital power supply ground; must be connected to system ground plane."+      },+      {+        "number": "7",+        "name": "P2.7",+        "type": "bidirectional",+        "description": "P2.7 general-purpose I/O pin, configurable as TB0CLK (Timer_B0 clock input) or XIN (32 kHz crystal oscillator input)."+      },+      {+        "number": "8",+        "name": "P2.6",+        "type": "bidirectional",+        "description": "P2.6 general-purpose I/O pin, configurable as MCLK (main clock output) or XOUT (32 kHz crystal oscillator output)."+      },+      {+        "number": "9",+        "name": "P2.1",+        "type": "bidirectional",+        "description": "P2.1 general-purpose I/O pin, configurable as TB0.2 (Timer_B0 CCR2 for capture/compare or PWM output) via TBRMP remapping."+      },+      {+        "number": "10",+        "name": "P2.0",+        "type": "bidirectional",+        "description": "P2.0 general-purpose I/O pin, configurable as TB0.1 (Timer_B0 CCR1 for capture/compare or PWM output) or COUT (eCOMP0 comparator output)."+      },+      {+        "number": "11",+        "name": "P1.7",+        "type": "bidirectional",+        "description": "P1.7 general-purpose I/O pin, configurable as UCA0TXD (UART transmit/SPI SIMO), TB0.2 (Timer_B0 capture/compare or PWM), TDO (JTAG data output), A7 (ADC input), or VREF+ (1.2 V reference voltage output when EXTREFEN=1)."+      },+      {+        "number": "12",+        "name": "P1.6",+        "type": "bidirectional",+        "description": "P1.6 general-purpose I/O pin, configurable as UCA0RXD (UART receive/SPI SOMI), TB0.1 (Timer_B0 capture/compare or PWM), TDI (JTAG data input), TCLK (JTAG clock), or A6 (ADC input); TI recommends disabling pin interrupts during JTAG debugging."+      },+      {+        "number": "13",+        "name": "P1.5",+        "type": "bidirectional",+        "description": "P1.5 general-purpose I/O pin, configurable as UCA0CLK (eUSCI_A0 SPI clock), TMS (JTAG test mode select), or A5 (ADC input); TI recommends disabling pin interrupts during JTAG debugging."+      },+      {+        "number": "14",+        "name": "P1.4",+        "type": "bidirectional",+        "description": "P1.4 general-purpose I/O pin, configurable as UCA0STE (eUSCI_A0 SPI slave transmit enable), TCK (JTAG clock input), or A4 (ADC input); TI recommends disabling pin interrupts during JTAG debugging."+      },+      {+        "number": "15",+        "name": "P1.3",+        "type": "bidirectional",+        "description": "P1.3 general-purpose I/O pin, configurable as UCA0TXD (UART transmit/SPI SIMO), C3 (eCOMP0 input), or A3 (ADC input)."+      },+      {+        "number": "16",+        "name": "P1.2",+        "type": "bidirectional",+        "description": "P1.2 general-purpose I/O pin, configurable as UCA0RXD (UART receive/SPI SOMI), TB0TRG (Timer_B0 external trigger input), C2 (eCOMP0 input), A2 (ADC input), or Veref- (ADC negative reference)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 87,+        "cost_usd": 1.0355,+        "at": "2026-09-23T08:43:31"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/msp430fr2111",+        "pages": 87,+        "sha256": "7505f67fee2c23fa",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file