component
MSP430FR2033IPMR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+101@@ -0,0 +1,101 @@+# MSP430FR2033IPMR++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++MSP430FR2033IPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P4.7 | bidirectional | General-purpose I/O P4.7 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1). |+| 2 | P4.6 | bidirectional | General-purpose I/O P4.6 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1). |+| 3 | P4.5 | bidirectional | General-purpose I/O P4.5 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1). |+| 4 | P4.4 | bidirectional | General-purpose I/O P4.4 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1). |+| 5 | P4.3 | bidirectional | General-purpose I/O P4.3 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1). |+| 6 | P4.2/XOUT | bidirectional | General-purpose I/O P4.2, or output terminal of the 32-kHz crystal oscillator (XT1); only a low-frequency 32 kHz crystal is supported. |+| 7 | P4.1/XIN | bidirectional | General-purpose I/O P4.1, or input terminal of the 32-kHz crystal oscillator (XT1); a digital clock may be applied here in XT1BYPASS mode. |+| 8 | DVSS | power_in | Ground supply pin for the digital and analog modules (0 V). |+| 9 | DVCC | power_in | Main supply pin for the digital and analog modules; 1.8 V to 3.6 V, with a recommended 4.7 µF to 10 µF capacitor at DVCC. |+| 10 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input, nonmaskable interrupt input, or Spy-Bi-Wire data input/output; unused pin should be pulled up to DVCC (47 kΩ or internal pullup) with a 10 nF (or 1.1 nF) pulldown. |+| 11 | TEST/SBWTCK | input | Test mode pin, which also serves as the Spy-Bi-Wire input clock; it always has an internal pulldown enabled and may be left open when unused. |+| 12 | P4.0/TA1.1 | bidirectional | General-purpose I/O P4.0, or Timer TA1 CCR1 capture input (CCI1A) / compare output (Out1). |+| 13 | P8.3/TA1.2 | bidirectional | General-purpose I/O P8.3, or Timer TA1 CCR2 capture input (CCI2A) / compare output (Out2); available only in the LQFP-64 package. |+| 14 | P8.2/TA1CLK | bidirectional | General-purpose I/O P8.2, or external timer clock input TACLK for Timer TA1; available only in the LQFP-64 package. |+| 15 | P8.1/ACLK/A9 | bidirectional | General-purpose I/O P8.1, ACLK output, or ADC analog input A9; available only in the LQFP-64 package. |+| 16 | P8.0/SMCLK/A8 | bidirectional | General-purpose I/O P8.0, SMCLK output, or ADC analog input A8; available only in the LQFP-64 package. |+| 17 | P1.7/TA0.1/TDO/A7 | bidirectional | General-purpose I/O P1.7 (interrupt-capable), or Timer TA0 CCR1 capture/compare output, JTAG test data output TDO, or ADC analog input A7; disable the pin interrupt during JTAG debug. |+| 18 | P1.6/TA0.2/TDI/TCLK/A6 | bidirectional | General-purpose I/O P1.6 (interrupt-capable), or Timer TA0 CCR2 capture/compare output, JTAG test data input or test clock TDI/TCLK, or ADC analog input A6; disable the pin interrupt during JTAG debug. |+| 19 | P1.5/TA0CLK/TMS/A5 | bidirectional | General-purpose I/O P1.5 (interrupt-capable), or Timer TA0 external clock input TA0CLK, JTAG test mode select TMS, or ADC analog input A5. |+| 20 | P1.4/MCLK/TCK/A4/VREF+ | bidirectional | General-purpose I/O P1.4 (interrupt-capable), or MCLK output, JTAG test clock TCK, or ADC analog input A4 / positive reference VREF+. |+| 21 | P1.3/UCA0STE/A3 | bidirectional | General-purpose I/O P1.3 (interrupt-capable), or eUSCI_A0 STE (SPI slave transmit enable), or ADC analog input A3. |+| 22 | P1.2/UCA0CLK/A2 | bidirectional | General-purpose I/O P1.2 (interrupt-capable), or eUSCI_A0 clock (UART/SPI SCLK), or ADC analog input A2. |+| 23 | P1.1/UCA0RXD/UCA0SOMI/A1/Veref+ | bidirectional | General-purpose I/O P1.1 (interrupt-capable), or eUSCI_A0 UART RXD / SPI SOMI, or ADC analog input A1 and external positive reference Veref+. |+| 24 | P1.0/UCA0TXD/UCA0SIMO/A0/Veref- | bidirectional | General-purpose I/O P1.0 (interrupt-capable), or eUSCI_A0 UART TXD / SPI SIMO, or ADC analog input A0 and external negative reference Veref-. |+| 25 | P5.7 | bidirectional | General-purpose I/O P5.7 with capacitive-touch capability; if unused, leave open and set to output direction. |+| 26 | P5.6 | bidirectional | General-purpose I/O P5.6 with capacitive-touch capability; if unused, leave open and set to output direction. |+| 27 | P5.5 | bidirectional | General-purpose I/O P5.5 with capacitive-touch capability; if unused, leave open and set to output direction. |+| 28 | P5.4 | bidirectional | General-purpose I/O P5.4 with capacitive-touch capability; if unused, leave open and set to output direction. |+| 29 | P5.3/UCB0SOMI/UCB0SCL | bidirectional | General-purpose I/O P5.3, or eUSCI_B0 SPI SOMI or I2C clock SCL. |+| 30 | P5.2/UCB0SIMO/UCB0SDA | bidirectional | General-purpose I/O P5.2, or eUSCI_B0 SPI SIMO or I2C data SDA. |+| 31 | P5.1/UCB0CLK | bidirectional | General-purpose I/O P5.1, or eUSCI_B0 SPI clock (SCLK). |+| 32 | P5.0/UCB0STE | bidirectional | General-purpose I/O P5.0, or eUSCI_B0 SPI STE. |+| 33 | P2.7 | bidirectional | General-purpose I/O P2.7 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 34 | P2.6 | bidirectional | General-purpose I/O P2.6 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 35 | P2.5 | bidirectional | General-purpose I/O P2.5 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 36 | P2.4 | bidirectional | General-purpose I/O P2.4 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 37 | P2.3 | bidirectional | General-purpose I/O P2.3 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 38 | P2.2 | bidirectional | General-purpose I/O P2.2 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 39 | P2.1 | bidirectional | General-purpose I/O P2.1 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 40 | P2.0 | bidirectional | General-purpose I/O P2.0 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability. |+| 41 | P6.7 | bidirectional | General-purpose I/O P6.7 with capacitive-touch capability; available only in the LQFP-64 package. |+| 42 | P6.6 | bidirectional | General-purpose I/O P6.6 with capacitive-touch capability; available only in the LQFP-64 package. |+| 43 | P6.5 | bidirectional | General-purpose I/O P6.5 with capacitive-touch capability. |+| 44 | P6.4 | bidirectional | General-purpose I/O P6.4 with capacitive-touch capability. |+| 45 | P6.3 | bidirectional | General-purpose I/O P6.3 with capacitive-touch capability. |+| 46 | P6.2 | bidirectional | General-purpose I/O P6.2 with capacitive-touch capability. |+| 47 | P6.1 | bidirectional | General-purpose I/O P6.1 with capacitive-touch capability. |+| 48 | P6.0 | bidirectional | General-purpose I/O P6.0 with capacitive-touch capability. |+| 49 | P3.7 | bidirectional | General-purpose I/O P3.7 with capacitive-touch capability. |+| 50 | P3.6 | bidirectional | General-purpose I/O P3.6 with capacitive-touch capability. |+| 51 | P3.5 | bidirectional | General-purpose I/O P3.5 with capacitive-touch capability. |+| 52 | P3.4 | bidirectional | General-purpose I/O P3.4 with capacitive-touch capability. |+| 53 | P3.3 | bidirectional | General-purpose I/O P3.3 with capacitive-touch capability. |+| 54 | P3.2 | bidirectional | General-purpose I/O P3.2 with capacitive-touch capability. |+| 55 | P3.1 | bidirectional | General-purpose I/O P3.1 with capacitive-touch capability. |+| 56 | P3.0 | bidirectional | General-purpose I/O P3.0 with capacitive-touch capability. |+| 57 | P7.7 | bidirectional | General-purpose I/O P7.7 with capacitive-touch capability; available only in the LQFP-64 package. |+| 58 | P7.6 | bidirectional | General-purpose I/O P7.6 with capacitive-touch capability; available only in the LQFP-64 package. |+| 59 | P7.5 | bidirectional | General-purpose I/O P7.5 with capacitive-touch capability; available only in the LQFP-64 package. |+| 60 | P7.4 | bidirectional | General-purpose I/O P7.4 with capacitive-touch capability; available only in the LQFP-64 package. |+| 61 | P7.3 | bidirectional | General-purpose I/O P7.3 with capacitive-touch capability. |+| 62 | P7.2 | bidirectional | General-purpose I/O P7.2 with capacitive-touch capability. |+| 63 | P7.1 | bidirectional | General-purpose I/O P7.1 with capacitive-touch capability. |+| 64 | P7.0 | bidirectional | General-purpose I/O P7.0 with capacitive-touch capability. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `MSP430FR2033IPMR`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `msp430fr2033ipmr-etched.step` / `msp430fr2033ipmr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430fr2033ipmr.step` / `msp430fr2033ipmr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430fr2033) (99 pp, sha256 `6220799f5c3a8c78`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430fr2033ipmr-datasheet.pdf)
page.jsonadded+536@@ -0,0 +1,536 @@+{+ "slug": "msp430fr2033ipmr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "msp430fr2033ipmr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "msp430fr2033ipmr.kicad_sym",+ "msp430fr2033ipmr.kicad_mod",+ "msp430fr2033ipmr.glb",+ "msp430fr2033ipmr.step",+ "msp430fr2033ipmr.lbr",+ "docs/hero.png",+ "docs/msp430fr2033ipmr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "msp430fr2033ipmr-hero.glb",+ "msp430fr2033ipmr-hero.overlay.json"+ ],+ "component": {+ "mpn": "MSP430FR2033IPMR",+ "manufacturer": "Texas Instruments",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/msp430fr2033",+ "parts": {+ "symbol": "msp430fr2033ipmr.kicad_sym",+ "footprint": "msp430fr2033ipmr.kicad_mod",+ "model_3d": "msp430fr2033ipmr-hero.glb",+ "model_3d_plain": "msp430fr2033ipmr.glb",+ "model_3d_step": "msp430fr2033ipmr-etched.step",+ "model_3d_step_plain": "msp430fr2033ipmr.step",+ "lbr": "msp430fr2033ipmr.lbr"+ },+ "distributor_links": {+ "lcsc": "C1338002",+ "digikey": "296-48617-2-ND",+ "mouser": "595-MSP430FR2033IPMR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:10:13Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-48617-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-MSP430FR2033IPMR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "P4.7",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.7 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1)."+ },+ {+ "number": "2",+ "name": "P4.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.6 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1)."+ },+ {+ "number": "3",+ "name": "P4.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.5 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1)."+ },+ {+ "number": "4",+ "name": "P4.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.4 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1)."+ },+ {+ "number": "5",+ "name": "P4.3",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.3 with capacitive-touch capability; if unused, leave open and set to output direction (PxDIR.n = 1)."+ },+ {+ "number": "6",+ "name": "P4.2/XOUT",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.2, or output terminal of the 32-kHz crystal oscillator (XT1); only a low-frequency 32 kHz crystal is supported."+ },+ {+ "number": "7",+ "name": "P4.1/XIN",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.1, or input terminal of the 32-kHz crystal oscillator (XT1); a digital clock may be applied here in XT1BYPASS mode."+ },+ {+ "number": "8",+ "name": "DVSS",+ "type": "power_in",+ "description": "Ground supply pin for the digital and analog modules (0 V)."+ },+ {+ "number": "9",+ "name": "DVCC",+ "type": "power_in",+ "description": "Main supply pin for the digital and analog modules; 1.8 V to 3.6 V, with a recommended 4.7 µF to 10 µF capacitor at DVCC."+ },+ {+ "number": "10",+ "name": "RST/NMI/SBWTDIO",+ "type": "bidirectional",+ "description": "Active-low reset input, nonmaskable interrupt input, or Spy-Bi-Wire data input/output; unused pin should be pulled up to DVCC (47 kΩ or internal pullup) with a 10 nF (or 1.1 nF) pulldown."+ },+ {+ "number": "11",+ "name": "TEST/SBWTCK",+ "type": "input",+ "description": "Test mode pin, which also serves as the Spy-Bi-Wire input clock; it always has an internal pulldown enabled and may be left open when unused."+ },+ {+ "number": "12",+ "name": "P4.0/TA1.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.0, or Timer TA1 CCR1 capture input (CCI1A) / compare output (Out1)."+ },+ {+ "number": "13",+ "name": "P8.3/TA1.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P8.3, or Timer TA1 CCR2 capture input (CCI2A) / compare output (Out2); available only in the LQFP-64 package."+ },+ {+ "number": "14",+ "name": "P8.2/TA1CLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P8.2, or external timer clock input TACLK for Timer TA1; available only in the LQFP-64 package."+ },+ {+ "number": "15",+ "name": "P8.1/ACLK/A9",+ "type": "bidirectional",+ "description": "General-purpose I/O P8.1, ACLK output, or ADC analog input A9; available only in the LQFP-64 package."+ },+ {+ "number": "16",+ "name": "P8.0/SMCLK/A8",+ "type": "bidirectional",+ "description": "General-purpose I/O P8.0, SMCLK output, or ADC analog input A8; available only in the LQFP-64 package."+ },+ {+ "number": "17",+ "name": "P1.7/TA0.1/TDO/A7",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.7 (interrupt-capable), or Timer TA0 CCR1 capture/compare output, JTAG test data output TDO, or ADC analog input A7; disable the pin interrupt during JTAG debug."+ },+ {+ "number": "18",+ "name": "P1.6/TA0.2/TDI/TCLK/A6",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.6 (interrupt-capable), or Timer TA0 CCR2 capture/compare output, JTAG test data input or test clock TDI/TCLK, or ADC analog input A6; disable the pin interrupt during JTAG debug."+ },+ {+ "number": "19",+ "name": "P1.5/TA0CLK/TMS/A5",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.5 (interrupt-capable), or Timer TA0 external clock input TA0CLK, JTAG test mode select TMS, or ADC analog input A5."+ },+ {+ "number": "20",+ "name": "P1.4/MCLK/TCK/A4/VREF+",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.4 (interrupt-capable), or MCLK output, JTAG test clock TCK, or ADC analog input A4 / positive reference VREF+."+ },+ {+ "number": "21",+ "name": "P1.3/UCA0STE/A3",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.3 (interrupt-capable), or eUSCI_A0 STE (SPI slave transmit enable), or ADC analog input A3."+ },+ {+ "number": "22",+ "name": "P1.2/UCA0CLK/A2",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.2 (interrupt-capable), or eUSCI_A0 clock (UART/SPI SCLK), or ADC analog input A2."+ },+ {+ "number": "23",+ "name": "P1.1/UCA0RXD/UCA0SOMI/A1/Veref+",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.1 (interrupt-capable), or eUSCI_A0 UART RXD / SPI SOMI, or ADC analog input A1 and external positive reference Veref+."+ },+ {+ "number": "24",+ "name": "P1.0/UCA0TXD/UCA0SIMO/A0/Veref–",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.0 (interrupt-capable), or eUSCI_A0 UART TXD / SPI SIMO, or ADC analog input A0 and external negative reference Veref-."+ },+ {+ "number": "25",+ "name": "P5.7",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.7 with capacitive-touch capability; if unused, leave open and set to output direction."+ },+ {+ "number": "26",+ "name": "P5.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.6 with capacitive-touch capability; if unused, leave open and set to output direction."+ },+ {+ "number": "27",+ "name": "P5.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.5 with capacitive-touch capability; if unused, leave open and set to output direction."+ },+ {+ "number": "28",+ "name": "P5.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.4 with capacitive-touch capability; if unused, leave open and set to output direction."+ },+ {+ "number": "29",+ "name": "P5.3/UCB0SOMI/UCB0SCL",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.3, or eUSCI_B0 SPI SOMI or I2C clock SCL."+ },+ {+ "number": "30",+ "name": "P5.2/UCB0SIMO/UCB0SDA",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.2, or eUSCI_B0 SPI SIMO or I2C data SDA."+ },+ {+ "number": "31",+ "name": "P5.1/UCB0CLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.1, or eUSCI_B0 SPI clock (SCLK)."+ },+ {+ "number": "32",+ "name": "P5.0/UCB0STE",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.0, or eUSCI_B0 SPI STE."+ },+ {+ "number": "33",+ "name": "P2.7",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.7 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "34",+ "name": "P2.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.6 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "35",+ "name": "P2.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.5 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "36",+ "name": "P2.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.4 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "37",+ "name": "P2.3",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.3 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "38",+ "name": "P2.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.2 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "39",+ "name": "P2.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.1 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "40",+ "name": "P2.0",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.0 (interrupt-capable, can wake the MCU from LPM3.5) with capacitive-touch capability."+ },+ {+ "number": "41",+ "name": "P6.7",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.7 with capacitive-touch capability; available only in the LQFP-64 package."+ },+ {+ "number": "42",+ "name": "P6.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.6 with capacitive-touch capability; available only in the LQFP-64 package."+ },+ {+ "number": "43",+ "name": "P6.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.5 with capacitive-touch capability."+ },+ {+ "number": "44",+ "name": "P6.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.4 with capacitive-touch capability."+ },+ {+ "number": "45",+ "name": "P6.3",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.3 with capacitive-touch capability."+ },+ {+ "number": "46",+ "name": "P6.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.2 with capacitive-touch capability."+ },+ {+ "number": "47",+ "name": "P6.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.1 with capacitive-touch capability."+ },+ {+ "number": "48",+ "name": "P6.0",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.0 with capacitive-touch capability."+ },+ {+ "number": "49",+ "name": "P3.7",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.7 with capacitive-touch capability."+ },+ {+ "number": "50",+ "name": "P3.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.6 with capacitive-touch capability."+ },+ {+ "number": "51",+ "name": "P3.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.5 with capacitive-touch capability."+ },+ {+ "number": "52",+ "name": "P3.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.4 with capacitive-touch capability."+ },+ {+ "number": "53",+ "name": "P3.3",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.3 with capacitive-touch capability."+ },+ {+ "number": "54",+ "name": "P3.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.2 with capacitive-touch capability."+ },+ {+ "number": "55",+ "name": "P3.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.1 with capacitive-touch capability."+ },+ {+ "number": "56",+ "name": "P3.0",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.0 with capacitive-touch capability."+ },+ {+ "number": "57",+ "name": "P7.7",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.7 with capacitive-touch capability; available only in the LQFP-64 package."+ },+ {+ "number": "58",+ "name": "P7.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.6 with capacitive-touch capability; available only in the LQFP-64 package."+ },+ {+ "number": "59",+ "name": "P7.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.5 with capacitive-touch capability; available only in the LQFP-64 package."+ },+ {+ "number": "60",+ "name": "P7.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.4 with capacitive-touch capability; available only in the LQFP-64 package."+ },+ {+ "number": "61",+ "name": "P7.3",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.3 with capacitive-touch capability."+ },+ {+ "number": "62",+ "name": "P7.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.2 with capacitive-touch capability."+ },+ {+ "number": "63",+ "name": "P7.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.1 with capacitive-touch capability."+ },+ {+ "number": "64",+ "name": "P7.0",+ "type": "bidirectional",+ "description": "General-purpose I/O P7.0 with capacitive-touch capability."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin-diagram text on page 8 is garbled and its P3/P7 ordering conflicts with the PM column of Tab; The rows for P1.5 through P1.0, P5.x, P2.1 through P2.7 and P8.1/P8.0 are not in the extracted Table; Descriptions of P1.x pins are taken from the function-selection table, and the ADC channel and refer",+ "6/64 pins cited to the wrong page (name found elsewhere): ['19:P1.5/TA0CLK/TMS/A5@p48', '20:P1.4/MCLK/TCK/A4/VREF+@p48', '21:P1.3/UCA0STE/A3@p48', '22:P1.2/UCA0CLK/A2@p48']"+ ],+ "pages_sent": 49,+ "cost_usd": 0.2436,+ "at": "2026-10-08T19:09:39"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/msp430fr2033",+ "pages": 99,+ "sha256": "6220799f5c3a8c78",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "msp430fr2033ipmr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "msp430fr2033ipmr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ed5db7b24333b5b32084c0a6e1b16a82273c6603b3d96f69d423fc258da1a5bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}