3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430F6767AIPZR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
MSP430F6767AIPZR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0P0 | input | SD24_B positive analog input for sigma-delta converter 0. |
| 2 | SD0N0 | input | SD24_B negative analog input for sigma-delta converter 0. |
| 3 | SD1P0 | input | SD24_B positive analog input for sigma-delta converter 1. |
| 4 | SD1N0 | input | SD24_B negative analog input for sigma-delta converter 1. |
| 5 | SD2P0 | input | SD24_B positive analog input for sigma-delta converter 2. |
| 6 | SD2N0 | input | SD24_B negative analog input for sigma-delta converter 2. |
| 7 | SD3P0 | input | SD24_B positive analog input for sigma-delta converter 3. |
| 8 | SD3N0 | input | SD24_B negative analog input for sigma-delta converter 3. |
| 9 | VASYS2 | power_in | Analog power supply selected between AVCC, AUXVCC1 and AUXVCC2; connect the recommended capacitor value CVSYS. |
| 10 | AVSS2 | power_in | Analog ground supply. |
| 11 | VREF | power_in | SD24_B external reference voltage input. |
| 12 | SD4P0 | input | SD24_B positive analog input for converter 4 (available on F676xA; not available on F674xA). |
| 13 | SD4N0 | input | SD24_B negative analog input for converter 4 (available on F676xA; not available on F674xA). |
| 14 | SD5P0 | input | SD24_B positive analog input for converter 5 (available on F676xA; not available on F674xA). |
| 15 | SD5N0 | input | SD24_B negative analog input for converter 5 (available on F676xA; not available on F674xA). |
| 16 | NC | unconnected | Not connected on F676xA devices; on F677xA this pin is SD6P0, the SD24_B positive analog input for converter 6. |
| 17 | NC | unconnected | Not connected on F676xA devices; on F677xA this pin is SD6N0, the SD24_B negative analog input for converter 6. |
| 18 | AVSS1 | power_in | Analog ground supply. |
| 19 | AVCC | power_in | Analog power supply. |
| 20 | VASYS1 | power_in | Analog power supply selected between AVCC, AUXVCC1 and AUXVCC2; connect the recommended capacitor value CVSYS. |
| 21 | AUXVCC2 | power_in | Auxiliary power supply AUXVCC2. |
| 22 | AUXVCC1 | power_in | Auxiliary power supply AUXVCC1. |
| 23 | VDSYS1 | power_in | Digital power supply selected between DVCC, AUXVCC1 and AUXVCC2; connect the recommended capacitor CVSYS and connect externally to VDSYS2 on the board. |
| 24 | DVCC | power_in | Digital power supply. |
| 25 | DVSS1 | power_in | Digital ground supply. |
| 26 | VCORE | power_out | Regulated core power supply for internal use only; no external current loading, connect only to the recommended capacitor CVCORE. |
| 27 | XIN | bidirectional | Input terminal for the crystal oscillator. |
| 28 | XOUT | bidirectional | Output terminal for the crystal oscillator. |
| 29 | AUXVCC3 | power_in | Auxiliary power supply AUXVCC3 for the backup subsystem. |
| 30 | RTCCAP1 | input | External time capture pin 1 for RTC_C. |
| 31 | RTCCAP0 | input | External time capture pin 0 for RTC_C. |
| 32 | P1.5/SMCLK/CB0/A5 | bidirectional | General-purpose digital I/O with port interrupt; alternate functions are SMCLK clock output, Comparator_B input CB0 and 10-bit ADC analog input A5. |
| 33 | P1.4/MCLK/CB1/A4 | bidirectional | General-purpose digital I/O with port interrupt; alternate functions are MCLK clock output, Comparator_B input CB1 and 10-bit ADC analog input A4. |
| 34 | P1.3/ADC10CLK/A3 | bidirectional | General-purpose digital I/O with port interrupt; alternate functions are ADC10_A clock output and 10-bit ADC analog input A3. |
| 35 | P1.2/ACLK/A2 | bidirectional | General-purpose digital I/O with port interrupt; alternate functions are ACLK clock output and 10-bit ADC analog input A2. |
| 36 | P1.1/TA2.1/CBOUT/VeREF+/A1 | bidirectional | General-purpose digital I/O with port interrupt; alternate functions are Timer TA2 CCR1 capture/compare, Comparator_B output, positive ADC reference terminal for an external reference, and 10-bit ADC analog input A1. |
| 37 | P1.0/TA1.1/VeREF-/A0 | bidirectional | General-purpose digital I/O with port interrupt; alternate functions are Timer TA1 CCR1 capture/compare, negative ADC reference terminal for an external reference, and 10-bit ADC analog input A0. |
| 38 | COM0 | bidirectional | LCD common output COM0 for the LCD backplane. |
| 39 | COM1 | bidirectional | LCD common output COM1 for the LCD backplane. |
| 40 | P1.6/COM2 | bidirectional | General-purpose digital I/O with port interrupt; alternate function is LCD common output COM2. |
| 41 | P1.7/COM3 | bidirectional | General-purpose digital I/O with port interrupt; alternate function is LCD common output COM3. |
| 42 | P2.0/PM_TA0.0/BSL_TX/COM4 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA0 CCR0 capture/compare, bootloader data transmit, or LCD common output COM4. |
| 43 | P2.1/PM_TA0.1/BSL_RX/COM5 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA0 CCR1 capture/compare, bootloader data receive, or LCD common output COM5. |
| 44 | P2.2/PM_TA0.2/COM6 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA0 CCR2 capture/compare, or LCD common output COM6. |
| 45 | P2.3/PM_TA1.0/COM7 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA1 CCR0 capture/compare, or LCD common output COM7. |
| 46 | LCDCAP/R33 | bidirectional | LCD capacitor connection and I/O port of the most positive analog LCD voltage (V1); must be connected to DVSS if not used. |
| 47 | P2.4/PM_TA2.0/R23 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA2 CCR0 capture/compare, or I/O port of the second most positive analog LCD voltage (V2). |
| 48 | P2.5/PM_UCB0SOMI/PM_UCB0SCL/LCDREF/R13 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default eUSCI_B0 SPI slave-out/master-in or I2C clock, external reference input for regulated LCD voltage, or I/O port of the third most positive LCD voltage (V3 or V4). |
| 49 | P2.6/PM_UCB0SIMO/PM_UCB0SDA/R03 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default eUSCI_B0 SPI slave-in/master-out or I2C data, or I/O port of the lowest analog LCD voltage (V5). |
| 50 | P2.7/PM_UCB0CLK/CB2 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default eUSCI_B0 clock input/output, or Comparator_B input CB2. |
| 51 | P3.0/PM_UCA0RXD/PM_UCA0SOMI | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A0 UART receive data or SPI slave-out/master-in. |
| 52 | P3.1/PM_UCA0TXD/PM_UCA0SIMO/S39 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A0 UART transmit data or SPI slave-in/master-out, or LCD segment output S39. |
| 53 | P3.2/PM_UCA0CLK/S38 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A0 clock input/output, or LCD segment output S38. |
| 54 | P3.3/PM_UCA1CLK/S37 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A1 clock input/output, or LCD segment output S37. |
| 55 | P3.4/PM_UCA1RXD/PM_UCA1SOMI/S36 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A1 UART receive data or SPI slave-out/master-in, or LCD segment output S36. |
| 56 | P3.5/PM_UCA1TXD/PM_UCA1SIMO/S35 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A1 UART transmit data or SPI slave-in/master-out, or LCD segment output S35. |
| 57 | P3.6/PM_UCA2RXD/PM_UCA2SOMI/S34 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A2 UART receive data or SPI slave-out/master-in, or LCD segment output S34. |
| 58 | P3.7/PM_UCA2TXD/PM_UCA2SIMO/S33 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A2 UART transmit data or SPI slave-in/master-out, or LCD segment output S33. |
| 59 | P4.0/PM_UCA2CLK/S32 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A2 clock input/output, or LCD segment output S32. |
| 60 | P4.1/PM_UCA3RXD/PM_UCA3SOMI/S31 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A3 UART receive data or SPI slave-out/master-in, or LCD segment output S31. |
| 61 | P4.2/PM_UCA3TXD/PM_UCA3SIMO/S30 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A3 UART transmit data or SPI slave-in/master-out, or LCD segment output S30. |
| 62 | P4.3/PM_UCA3CLK/S29 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_A3 clock input/output, or LCD segment output S29. |
| 63 | P4.4/PM_UCB1SOMI/PM_UCB1SCL/S28 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_B1 SPI slave-out/master-in or I2C clock, or LCD segment output S28. |
| 64 | P4.5/PM_UCB1SIMO/PM_UCB1SDA/S27 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_B1 SPI slave-in/master-out or I2C data, or LCD segment output S27. |
| 65 | P4.6/PM_UCB1CLK/S26 | bidirectional | General-purpose digital I/O with mappable function; default eUSCI_B1 clock input/output, or LCD segment output S26. |
| 66 | P4.7/PM_TA3.0/S25 | bidirectional | General-purpose digital I/O with mappable function; default Timer TA3 CCR0 capture/compare, or LCD segment output S25. |
| 67 | P5.0/SDCLK/S24 | bidirectional | General-purpose digital I/O; SD24_B bit-stream clock input/output, or LCD segment output S24. |
| 68 | P5.1/PM_SD0DIO/S23 | bidirectional | General-purpose digital I/O; default SD24_B converter 0 bit-stream data input/output, or LCD segment output S23. |
| 69 | P5.2/PM_SD1DIO/S22 | bidirectional | General-purpose digital I/O; default SD24_B converter 1 bit-stream data input/output, or LCD segment output S22. |
| 70 | P5.3/PM_SD2DIO/S21 | bidirectional | General-purpose digital I/O; default SD24_B converter 2 bit-stream data input/output, or LCD segment output S21. |
| 71 | P5.4/PM_SD3DIO/S20 | bidirectional | General-purpose digital I/O; default SD24_B converter 3 bit-stream data input/output, or LCD segment output S20. |
| 72 | P5.5/PM_SD4DIO/S19 | bidirectional | General-purpose digital I/O; default SD24_B converter 4 bit-stream data input/output (available on F676xA), or LCD segment output S19. |
| 73 | P5.6/PM_SD5DIO/S18 | bidirectional | General-purpose digital I/O; default SD24_B converter 5 bit-stream data input/output (available on F676xA), or LCD segment output S18. |
| 74 | P5.7/S17 | bidirectional | General-purpose digital I/O or LCD segment output S17; the SD24_B converter 6 data function is not available on F676xA devices. |
| 75 | VDSYS2 | power_in | Digital power supply for I/Os; must be connected externally to VDSYS1 on the board. |
| 76 | DVSS2 | power_in | Digital ground supply. |
| 77 | P6.0/S16 | bidirectional | General-purpose digital I/O or LCD segment output S16. |
| 78 | P6.1/S15 | bidirectional | General-purpose digital I/O or LCD segment output S15. |
| 79 | P6.2/S14 | bidirectional | General-purpose digital I/O or LCD segment output S14. |
| 80 | P6.3/S13 | bidirectional | General-purpose digital I/O or LCD segment output S13. |
| 81 | P6.4/S12 | bidirectional | General-purpose digital I/O or LCD segment output S12. |
| 82 | P6.5/S11 | bidirectional | General-purpose digital I/O or LCD segment output S11. |
| 83 | P6.6/S10 | bidirectional | General-purpose digital I/O or LCD segment output S10. |
| 84 | P6.7/S9 | bidirectional | General-purpose digital I/O or LCD segment output S9. |
| 85 | P7.0/S8 | bidirectional | General-purpose digital I/O or LCD segment output S8. |
| 86 | P7.1/S7 | bidirectional | General-purpose digital I/O or LCD segment output S7. |
| 87 | P7.2/S6 | bidirectional | General-purpose digital I/O or LCD segment output S6. |
| 88 | P7.3/S5 | bidirectional | General-purpose digital I/O or LCD segment output S5. |
| 89 | P7.4/S4 | bidirectional | General-purpose digital I/O or LCD segment output S4. |
| 90 | P7.5/S3 | bidirectional | General-purpose digital I/O or LCD segment output S3. |
| 91 | P7.6/S2 | bidirectional | General-purpose digital I/O or LCD segment output S2. |
| 92 | P7.7/S1 | bidirectional | General-purpose digital I/O or LCD segment output S1. |
| 93 | P8.0/S0 | bidirectional | General-purpose digital I/O or LCD segment output S0. |
| 94 | P8.1/TACLK/RTCCLK/CB3 | bidirectional | General-purpose digital I/O; alternate functions are Timer clock input TACLK for TA0-TA3, RTCCLK clock output, and Comparator_B input CB3. |
| 95 | TEST/SBWTCK | input | Test mode pin that selects digital I/O on the JTAG pins; also the Spy-Bi-Wire input clock. |
| 96 | PJ.0/TDO | bidirectional | General-purpose digital I/O; JTAG test data output. |
| 97 | PJ.1/TDI/TCLK | bidirectional | General-purpose digital I/O; JTAG test data input or test clock input. |
| 98 | PJ.2/TMS | bidirectional | General-purpose digital I/O; JTAG test mode select. |
| 99 | PJ.3/TCK | bidirectional | General-purpose digital I/O; JTAG test clock. |
| 100 | RST/NMI/SBWTDIO | bidirectional | Reset input, active low (internal pullup enabled by default when configured as reset); nonmaskable interrupt input; Spy-By-Wire data input/output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at DVCC to DVSS | -0.3 | 4.1 | V | 26 | |||
| Voltage applied to pins | -0.3 | V | All pins except VCORE, SD24_B input pins (SDxN0, SDxP0), AUXVCC1, AUXVCC2, AUXVCC3; max = VCC + 0.3 V | 26 | |||
| Diode current at pins, all except SD24_B input pins | -2 | 2 | mA | 26 | |||
| Diode current at SD24_B input pins (SD0N0 to SD6P0) | 2 | mA | 26 | ||||
| Maximum junction temperature | TJ | 95 | °C | 26 | |||
| Storage temperature | Tstg | -55 | 105 | °C | 26 | ||
| Electrostatic discharge, human-body model (HBM) | V(ESD) | -1000 | 1000 | V | Per ANSI/ESDA/JEDEC JS-001 | 26 | |
| Electrostatic discharge, charged-device model (CDM) | V(ESD) | -250 | 250 | V | Per JEDEC JESD22-C101 | 26 | |
| Supply voltage during program execution and flash programming | VCC | 1.8 | 3.6 | V | PMMCOREVx = 0 | 26 | |
| Supply voltage during program execution and flash programming | VCC | 2 | 3.6 | V | PMMCOREVx = 0, 1 | 26 | |
| Supply voltage during program execution and flash programming | VCC | 2.2 | 3.6 | V | PMMCOREVx = 0, 1, 2 | 26 | |
| Supply voltage during program execution and flash programming | VCC | 2.4 | 3.6 | V | PMMCOREVx = 0, 1, 2, 3 | 26 | |
| Operating free-air temperature | TA | -40 | 85 | °C | I version | 26 | |
| Operating junction temperature | TJ | -40 | 85 | °C | I version | 26 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 8 | MHz | PMMCOREVx = 0, 1.8 V ≤ VCC ≤ 3.6 V | 27 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 12 | MHz | PMMCOREVx = 1, 2 V ≤ VCC ≤ 3.6 V | 27 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 20 | MHz | PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V | 27 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 25 | MHz | PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V | 27 | |
| Maximum load current that can be drawn from DVCC for core and IO | ILOAD, DVCCD | 20 | mA | ILOAD = ICORE + IIO | 27 | ||
| Maximum load current that can be drawn from AUXVCC1 for core and IO | ILOAD, AUX1D | 20 | mA | ILOAD = ICORE + IIO | 27 | ||
| Maximum load current that can be drawn from AUXVCC2 for core and IO | ILOAD, AUX2D | 20 | mA | ILOAD = ICORE + IIO | 27 | ||
| Maximum load current that can be drawn from AVCC for analog modules | ILOAD, AVCCA | 10 | mA | ILOAD = IModules | 27 | ||
| Maximum load current that can be drawn from AUXVCC1 for analog modules | ILOAD, AUX1A | 5 | mA | ILOAD = IModules | 27 | ||
| Maximum load current that can be drawn from AUXVCC2 for analog modules | ILOAD, AUX2A | 5 | mA | ILOAD = IModules | 27 | ||
| Supply voltage range for all supplies at pins DVCC, AVCC, AUXVCC1, AUXVCC2, AUXVCC3 | VCC | 1.8 | 3.6 | V | 42 | ||
| Digital system supply voltage range, VDSYS = VCC, RON × ILOAD | VDSYS | 1.8 | 3.6 | V | PMMCOREVx = 0 | 42 | |
| Digital system supply voltage range, VDSYS = VCC, RON × ILOAD | VDSYS | 2 | 3.6 | V | PMMCOREVx = 1 | 42 | |
| Digital system supply voltage range, VDSYS = VCC, RON × ILOAD | VDSYS | 2.2 | 3.6 | V | PMMCOREVx = 2 | 42 | |
| Digital system supply voltage range, VDSYS = VCC, RON × ILOAD | VDSYS | 2.4 | 3.6 | V | PMMCOREVx = 3 | 42 | |
| Ambient temperature during HTOL | TA,HTOL | 150 | °C | Module should be functional during HTOL | 42 | ||
| XT1 oscillator logic-level square-wave input frequency, LF mode | fXT1,LF,SW | 10 | 32.768 | 50 | kHz | XTS = 0, XT1BYPASS = 1 | 33 |
| VLO frequency | fVLO | 6 | 9.6 | 15 | kHz | Measured at ACLK, 1.8 V to 3.6 V | 34 |
| VLO duty cycle | 40 | 50 | 60 | % | Measured at ACLK, 1.8 V to 3.6 V | 34 | |
| REFO absolute tolerance calibrated | -3.5 | 3.5 | % | Full temperature range, 1.8 V to 3.6 V | 34 | ||
| REFO absolute tolerance calibrated | -1.5 | 1.5 | % | TA = 25°C, 3 V | 34 | ||
| REFO duty cycle | 40 | 50 | 60 | % | Measured at ACLK, 1.8 V to 3.6 V | 34 | |
| DCO frequency (0, 0) | fDCO(0,0) | 0.07 | 0.2 | MHz | DCORSELx = 0, DCOx = 0, MODx = 0 | 35 | |
| DCO frequency (7, 31) | fDCO(7,31) | 60 | 135 | MHz | DCORSELx = 7, DCOx = 31, MODx = 0 | 35 | |
| Positive-going input threshold voltage | VIT+ | 0.8 | 1.4 | V | VCC = 1.8 V | 36 | |
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.1 | V | VCC = 3 V | 36 | |
| Negative-going input threshold voltage | VIT- | 0.45 | 1 | V | VCC = 1.8 V | 36 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC = 3 V | 36 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.3 | 0.85 | V | VCC = 1.8 V | 36 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.4 | 1 | V | VCC = 3 V | 36 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS, For pulldown: VIN = VCC | 36 |
| High-impedance leakage current | Ilkg(Px.y) | -50 | 50 | nA | VCC 1.8 V, 3 V | 36 | |
| External interrupt timing, external trigger pulse duration to set interrupt flag | t(int) | 20 | ns | Port P1, P2: P1.x to P2.x; VCC 2.2 V, 3 V | 36 | ||
| High-level output voltage | VOH | 1.55 | 1.8 | V | I(OHmax) = -3 mA, VCC 1.8 V | 37 | |
| High-level output voltage | VOH | 2.75 | 3 | V | I(OHmax) = -5 mA, VCC 3 V | 37 | |
| Low-level output voltage | VOL | 0 | 0.25 | V | I(OLmax) = 3 mA, VCC 1.8 V | 37 | |
| Port output frequency (with load) | fPx.y | 16 | MHz | VCC = 1.8 V, PMMCOREVx = 0 | 37 | ||
| Port output frequency (with load) | fPx.y | 25 | MHz | VCC = 3 V, PMMCOREVx = 3 | 37 | ||
| Timer_A input clock frequency | fTA | 25 | MHz | Internal: SMCLK or ACLK, External: TACLK, Duty cycle = 50% ±10% | 45 | ||
| BORH off voltage, DVCC rising level | V(DVCC_BOR_IT+) | 0.8 | 1.2 | 1.5 | V | /dDVCC/dt/ < 3 V/s | 40 |
| Junction-to-ambient thermal resistance, still air | RθJA | 42.9 | °C/W | still air | 31 | ||
| Junction-to-case (top) thermal resistance | RθJC(TOP) | 9.3 | °C/W | 31 | |||
| Junction-to-board thermal resistance | RθJB | 20.6 | °C/W | 31 | |||
| Junction-to-package-top thermal characterization parameter | ΨJT | 0.3 | °C/W | 31 | |||
| Junction-to-board thermal characterization parameter | ΨJB | 20.3 | °C/W | 31 |
CAD (KiCad official)
- Symbol:
MSP430F6767AIPZR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
msp430f6767aipzr-etched.step/msp430f6767aipzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f6767aipzr.step/msp430f6767aipzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (187 pp, sha256
bfc10ec41b8325bf, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).