# MSP430F6765AIPZR

**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

MSP430F6765AIPZR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0P0 | input | SD24_B positive analog input for converter 0. |
| 2 | SD0N0 | input | SD24_B negative analog input for converter 0. |
| 3 | SD1P0 | input | SD24_B positive analog input for converter 1. |
| 4 | SD1N0 | input | SD24_B negative analog input for converter 1. |
| 5 | SD2P0 | input | SD24_B positive analog input for converter 2. |
| 6 | SD2N0 | input | SD24_B negative analog input for converter 2. |
| 7 | SD3P0 | input | SD24_B positive analog input for converter 3. |
| 8 | SD3N0 | input | SD24_B negative analog input for converter 3. |
| 9 | VASYS2 | power_in | Analog power supply selected between AVCC, AUXVCC1 and AUXVCC2; connect the recommended capacitor CVSYS. |
| 10 | AVSS2 | power_in | Analog ground supply. |
| 11 | VREF | power_in | SD24_B external reference voltage input. |
| 12 | SD4P0 | input | SD24_B positive analog input for converter 4; available on F676xA devices. |
| 13 | SD4N0 | input | SD24_B negative analog input for converter 4; available on F676xA devices. |
| 14 | SD5P0 | input | SD24_B positive analog input for converter 5; available on F676xA devices. |
| 15 | SD5N0 | input | SD24_B negative analog input for converter 5; available on F676xA devices. |
| 16 | NC | unconnected | Pin is SD6P0 (SD24_B positive analog input for converter 6) on F677xA only; it is not connected on F676xA devices. |
| 17 | NC | unconnected | Pin is SD6N0 (SD24_B negative analog input for converter 6) on F677xA only; it is not connected on F676xA devices. |
| 18 | AVSS1 | power_in | Analog ground supply. |
| 19 | AVCC | power_in | Analog power supply; TI recommends powering AVCC and DVCC from the same source with at most 0.3 V difference. |
| 20 | VASYS1 | power_in | Analog power supply selected between AVCC, AUXVCC1 and AUXVCC2; connect the recommended capacitor CVSYS. |
| 21 | AUXVCC2 | power_in | Auxiliary power supply AUXVCC2. |
| 22 | AUXVCC1 | power_in | Auxiliary power supply AUXVCC1. |
| 23 | VDSYS1 | power_in | Digital power supply selected between DVCC, AUXVCC1 and AUXVCC2; connect the recommended capacitor CVSYS and connect externally to VDSYS2. |
| 24 | DVCC | power_in | Digital power supply; VCC is 1.8 V to 3.6 V depending on the PMMCOREVx setting. |
| 25 | DVSS1 | power_in | Digital ground supply. |
| 26 | VCORE | power_out | Regulated core power supply for internal use only; no external DC loading, connect only to CVCORE (470 nF recommended). |
| 27 | XIN | bidirectional | Input terminal for the crystal oscillator. |
| 28 | XOUT | bidirectional | Output terminal for the crystal oscillator. |
| 29 | AUXVCC3 | power_in | Auxiliary power supply AUXVCC3 for the backup subsystem. |
| 30 | RTCCAP1 | input | External time capture pin 1 for RTC_C. |
| 31 | RTCCAP0 | input | External time capture pin 0 for RTC_C. |
| 32 | P1.5/SMCLK/CB0/A5 | bidirectional | General-purpose digital I/O with port interrupt; also SMCLK clock output, Comparator_B input CB0 and 10-bit ADC analog input A5. |
| 33 | P1.4/MCLK/CB1/A4 | bidirectional | General-purpose digital I/O with port interrupt; also MCLK clock output, Comparator_B input CB1 and 10-bit ADC analog input A4. |
| 34 | P1.3/ADC10CLK/A3 | bidirectional | General-purpose digital I/O with port interrupt; also ADC10_A clock output and 10-bit ADC analog input A3. |
| 35 | P1.2/ACLK/A2 | bidirectional | General-purpose digital I/O with port interrupt; also ACLK clock output and 10-bit ADC analog input A2. |
| 36 | P1.1/TA2.1/CBOUT/VeREF+/A1 | bidirectional | General-purpose digital I/O with port interrupt; also Timer TA2 CCR1, Comparator_B output, positive ADC reference terminal for an external reference, and analog input A1. |
| 37 | P1.0/TA1.1/VeREF-/A0 | bidirectional | General-purpose digital I/O with port interrupt; also Timer TA1 CCR1, negative ADC reference terminal for an external reference, and analog input A0. |
| 38 | COM0 | bidirectional | LCD common output COM0 for the LCD backplane. |
| 39 | COM1 | bidirectional | LCD common output COM1 for the LCD backplane. |
| 40 | P1.6/COM2 | bidirectional | General-purpose digital I/O with port interrupt; also LCD common output COM2. |
| 41 | P1.7/COM3 | bidirectional | General-purpose digital I/O with port interrupt; also LCD common output COM3. |
| 42 | P2.0/PM_TA0.0/BSL_TX/COM4 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA0 CCR0, bootloader data transmit, and LCD common output COM4. |
| 43 | P2.1/PM_TA0.1/BSL_RX/COM5 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA0 CCR1, bootloader data receive, and LCD common output COM5. |
| 44 | P2.2/PM_TA0.2/COM6 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA0 CCR2, and LCD common output COM6. |
| 45 | P2.3/PM_TA1.0/COM7 | bidirectional | General-purpose digital I/O with port interrupt and mappable function; default Timer TA1 CCR0, and LCD common output COM7. |
| 46 | LCDCAP/R33 | bidirectional | LCD capacitor connection and input/output port of the most positive analog LCD voltage (V1); must be connected to DVSS if not used. |
| 47 | P2.4/PM_TA2.0/R23 | bidirectional | General-purpose digital I/O with port interrupt and mappable function (default Timer TA2 CCR0); also input/output port of the second most positive analog LCD voltage (V2). |
| 48 | P2.5/PM_UCB0SOMI/PM_UCB0SCL/LCDREF/R13 | bidirectional | General-purpose digital I/O with port interrupt and mappable function (default eUSCI_B0 SPI SOMI or I2C SCL); also external LCD reference input LCDREF and LCD voltage port R13 (V3 or V4). |
| 49 | P2.6/PM_UCB0SIMO/PM_UCB0SDA/R03 | bidirectional | General-purpose digital I/O with port interrupt and mappable function (default eUSCI_B0 SPI SIMO or I2C SDA); also input/output port of the lowest analog LCD voltage (V5) on R03. |
| 50 | P2.7/PM_UCB0CLK/CB2 | bidirectional | General-purpose digital I/O with port interrupt and mappable function (default eUSCI_B0 clock); also Comparator_B input CB2. |
| 51 | P3.0/PM_UCA0RXD/PM_UCA0SOMI | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A0 UART receive data or SPI SOMI). |
| 52 | P3.1/PM_UCA0TXD/PM_UCA0SIMO/S39 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A0 UART transmit data or SPI SIMO); also LCD segment output S39. |
| 53 | P3.2/PM_UCA0CLK/S38 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A0 clock input/output); also LCD segment output S38. |
| 54 | P3.3/PM_UCA1CLK/S37 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A1 clock input/output); also LCD segment output S37. |
| 55 | P3.4/PM_UCA1RXD/PM_UCA1SOMI/S36 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A1 UART receive data or SPI SOMI); also LCD segment output S36. |
| 56 | P3.5/PM_UCA1TXD/PM_UCA1SIMO/S35 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A1 UART transmit data or SPI SIMO); also LCD segment output S35. |
| 57 | P3.6/PM_UCA2RXD/PM_UCA2SOMI/S34 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A2 UART receive data or SPI SOMI); also LCD segment output S34. |
| 58 | P3.7/PM_UCA2TXD/PM_UCA2SIMO/S33 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A2 UART transmit data or SPI SIMO); also LCD segment output S33. |
| 59 | P4.0/PM_UCA2CLK/S32 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A2 clock input/output); also LCD segment output S32. |
| 60 | P4.1/PM_UCA3RXD/PM_UCA3SOMI/S31 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A3 UART receive data or SPI SOMI); also LCD segment output S31. |
| 61 | P4.2/PM_UCA3TXD/PM_UCA3SIMO/S30 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A3 UART transmit data or SPI SIMO); also LCD segment output S30. |
| 62 | P4.3/PM_UCA3CLK/S29 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_A3 clock input/output); also LCD segment output S29. |
| 63 | P4.4/PM_UCB1SOMI/PM_UCB1SCL/S28 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_B1 SPI SOMI or I2C SCL); also LCD segment output S28. |
| 64 | P4.5/PM_UCB1SIMO/PM_UCB1SDA/S27 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_B1 SPI SIMO or I2C SDA); also LCD segment output S27. |
| 65 | P4.6/PM_UCB1CLK/S26 | bidirectional | General-purpose digital I/O with mappable function (default eUSCI_B1 clock input/output); also LCD segment output S26. |
| 66 | P4.7/PM_TA3.0/S25 | bidirectional | General-purpose digital I/O with mappable function (default Timer TA3 CCR0); also LCD segment output S25. |
| 67 | P5.0/SDCLK/S24 | bidirectional | General-purpose digital I/O; SD24_B bit-stream clock input/output; also LCD segment output S24. |
| 68 | P5.1/PM_SD0DIO/S23 | bidirectional | General-purpose digital I/O; default SD24_B converter 0 bit-stream data input/output; also LCD segment output S23. |
| 69 | P5.2/PM_SD1DIO/S22 | bidirectional | General-purpose digital I/O; default SD24_B converter 1 bit-stream data input/output; also LCD segment output S22. |
| 70 | P5.3/PM_SD2DIO/S21 | bidirectional | General-purpose digital I/O; default SD24_B converter 2 bit-stream data input/output; also LCD segment output S21. |
| 71 | P5.4/PM_SD3DIO/S20 | bidirectional | General-purpose digital I/O; default SD24_B converter 3 bit-stream data input/output; also LCD segment output S20. |
| 72 | P5.5/PM_SD4DIO/S19 | bidirectional | General-purpose digital I/O; default SD24_B converter 4 bit-stream data input/output (available on F676xA); also LCD segment output S19. |
| 73 | P5.6/PM_SD5DIO/S18 | bidirectional | General-purpose digital I/O; default SD24_B converter 5 bit-stream data input/output (available on F676xA); also LCD segment output S18. |
| 74 | P5.7/S17 | bidirectional | General-purpose digital I/O and LCD segment output S17; SD24_B converter 6 data (SD6DIO) is not available on F676xA devices. |
| 75 | VDSYS2 | power_in | Digital power supply for I/Os; must be connected externally to VDSYS1 for proper operation. |
| 76 | DVSS2 | power_in | Digital ground supply. |
| 77 | P6.0/S16 | bidirectional | General-purpose digital I/O; LCD segment output S16. |
| 78 | P6.1/S15 | bidirectional | General-purpose digital I/O; LCD segment output S15. |
| 79 | P6.2/S14 | bidirectional | General-purpose digital I/O; LCD segment output S14. |
| 80 | P6.3/S13 | bidirectional | General-purpose digital I/O; LCD segment output S13. |
| 81 | P6.4/S12 | bidirectional | General-purpose digital I/O; LCD segment output S12. |
| 82 | P6.5/S11 | bidirectional | General-purpose digital I/O; LCD segment output S11. |
| 83 | P6.6/S10 | bidirectional | General-purpose digital I/O; LCD segment output S10. |
| 84 | P6.7/S9 | bidirectional | General-purpose digital I/O; LCD segment output S9. |
| 85 | P7.0/S8 | bidirectional | General-purpose digital I/O; LCD segment output S8. |
| 86 | P7.1/S7 | bidirectional | General-purpose digital I/O; LCD segment output S7. |
| 87 | P7.2/S6 | bidirectional | General-purpose digital I/O; LCD segment output S6. |
| 88 | P7.3/S5 | bidirectional | General-purpose digital I/O; LCD segment output S5. |
| 89 | P7.4/S4 | bidirectional | General-purpose digital I/O; LCD segment output S4. |
| 90 | P7.5/S3 | bidirectional | General-purpose digital I/O; LCD segment output S3. |
| 91 | P7.6/S2 | bidirectional | General-purpose digital I/O; LCD segment output S2. |
| 92 | P7.7/S1 | bidirectional | General-purpose digital I/O; LCD segment output S1. |
| 93 | P8.0/S0 | bidirectional | General-purpose digital I/O; LCD segment output S0. |
| 94 | P8.1/TACLK/RTCCLK/CB3 | bidirectional | General-purpose digital I/O; Timer clock input TACLK for TA0 to TA3, RTCCLK clock output, and Comparator_B input CB3. |
| 95 | TEST/SBWTCK | input | Test mode pin for selecting digital I/O on JTAG pins and Spy-Bi-Wire input clock; has an internal pulldown always enabled. |
| 96 | PJ.0/TDO | bidirectional | General-purpose digital I/O; JTAG test data output. |
| 97 | PJ.1/TDI/TCLK | bidirectional | General-purpose digital I/O; JTAG test data input or test clock input. |
| 98 | PJ.2/TMS | bidirectional | General-purpose digital I/O; JTAG test mode select. |
| 99 | PJ.3/TCK | bidirectional | General-purpose digital I/O; JTAG test clock. |
| 100 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input, nonmaskable interrupt input, and Spy-By-Wire data input/output; internal pullup is enabled by default when configured as reset. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |

## CAD (KiCad official)

- Symbol: `MSP430F6765AIPZR`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `msp430f6765aipzr-etched.step` / `msp430f6765aipzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430f6765aipzr.step` / `msp430f6765aipzr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430f6777a) (187 pp, sha256 `7bfd1dc02cad733e`, retrieved 2026-10-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/msp430f6765aipzr-datasheet.pdf)