main
Ray
Publish 0.1.0
fd9c7b6
MSP430F6721AIPZR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
MSP430F6721AIPZR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0P0 | input | SD24_B positive analog input for converter 0. |
| 2 | SD0N0 | input | SD24_B negative analog input for converter 0. |
| 3 | SD1P0 | input | SD24_B positive analog input for converter 1. |
| 4 | SD1N0 | input | SD24_B negative analog input for converter 1. |
| 5 | NC | unconnected | Not connected on MSP430F672xA devices; SD2P0 is only bonded on MSP430F673xA. |
| 6 | NC | unconnected | Not connected on MSP430F672xA devices; SD2N0 is only bonded on MSP430F673xA. |
| 7 | VREF | power_in | SD24_B external reference voltage input. |
| 8 | AVSS | power_in | Analog ground supply. |
| 9 | AVCC | power_in | Analog power supply; TI recommends AVCC and DVCC come from the same source with at most 0.3 V difference. |
| 10 | VASYS | power_out | Analog power supply selected among AVCC, AUXVCC1 and AUXVCC2; connect the recommended CVSYS capacitor. |
| 11 | P9.1/A5 | bidirectional | General-purpose digital I/O P9.1 or ADC10 analog input A5. |
| 12 | P9.2/A4 | bidirectional | General-purpose digital I/O P9.2 or ADC10 analog input A4. |
| 13 | P9.3/A3 | bidirectional | General-purpose digital I/O P9.3 or ADC10 analog input A3. |
| 14 | P1.0/PM_TA0.0/VeREF-/A2 | bidirectional | General-purpose I/O P1.0 with port interrupt, mappable Timer_A0 capture/compare, ADC10 negative reference VeREF- or analog input A2. |
| 15 | P1.1/PM_TA0.1/VeREF+/A1 | bidirectional | General-purpose I/O P1.1 with port interrupt, mappable Timer_A0 capture/compare, ADC10 positive reference VeREF+ or analog input A1. |
| 16 | P1.2/PM_UCA0RXD/PM_UCA0SOMI/A0 | bidirectional | General-purpose I/O P1.2 with port interrupt, mappable eUSCI_A0 UART receive or SPI data, or ADC10 analog input A0. |
| 17 | P1.3/PM_UCA0TXD/PM_UCA0SIMO/R03 | bidirectional | General-purpose I/O P1.3 with port interrupt, mappable eUSCI_A0 UART transmit or SPI data, or LCD voltage input/output R03 (lowest analog LCD voltage V5). |
| 18 | AUXVCC2 | power_in | Auxiliary power supply AUXVCC2; maximum load 20 mA for core and I/O. |
| 19 | AUXVCC1 | power_in | Auxiliary power supply AUXVCC1; maximum load 20 mA for core and I/O. |
| 20 | VDSYS | power_out | Digital power supply selected between DVCC, AUXVCC1 and AUXVCC2; must be connected externally to DVSYS with the recommended CVSYS capacitor. |
| 21 | DVCC | power_in | Digital power supply; absolute maximum voltage DVCC to DVSS is 4.1 V. |
| 22 | DVSS | power_in | Digital ground supply. |
| 23 | VCORE | power_out | Regulated core supply for internal use only; no external loading, connect only the recommended 470 nF capacitor. |
| 24 | XIN | input | Input terminal for the 32-kHz crystal oscillator. |
| 25 | XOUT | output | Output terminal for the 32-kHz crystal oscillator. |
| 26 | AUXVCC3 | power_in | Auxiliary power supply for the backup subsystem (RTC and backup RAM). |
| 27 | P1.4/PM_UCA1RXD/PM_UCA1SOMI/LCDREF/R13 | bidirectional | General-purpose I/O P1.4 with port interrupt, mappable eUSCI_A1 UART receive or SPI data, LCD reference input LCDREF, or LCD voltage R13. |
| 28 | P1.5/PM_UCA1TXD/PM_UCA1SIMO/R23 | bidirectional | General-purpose I/O P1.5 with port interrupt, mappable eUSCI_A1 UART transmit or SPI data, or LCD voltage R23. |
| 29 | LCDCAP/R33 | bidirectional | LCD capacitor connection, or LCD voltage R33 (most positive); must be connected to DVSS if not used. |
| 30 | P8.4/TA1.0 | bidirectional | General-purpose digital I/O P8.4 or Timer_A1 CCR0 capture/compare. |
| 31 | P8.5/TA1.1 | bidirectional | General-purpose digital I/O P8.5 or Timer_A1 CCR1 capture/compare. |
| 32 | COM0 | output | LCD common output COM0 for the LCD backplane. |
| 33 | COM1 | output | LCD common output COM1 for the LCD backplane. |
| 34 | COM2 | output | LCD common output COM2 for the LCD backplane. |
| 35 | COM3 | output | LCD common output COM3 for the LCD backplane. |
| 36 | P1.6/PM_UCA0CLK/COM4 | bidirectional | General-purpose I/O P1.6 with port interrupt, mappable eUSCI_A0 clock, or LCD common output COM4. |
| 37 | P1.7/PM_UCB0CLK/COM5 | bidirectional | General-purpose I/O P1.7 with port interrupt, mappable eUSCI_B0 clock, or LCD common output COM5. |
| 38 | P2.0/PM_UCB0SOMI/PM_UCB0SCL/COM6 | bidirectional | General-purpose I/O P2.0 with port interrupt, mappable eUSCI_B0 SPI data or I2C clock, or LCD common output COM6. |
| 39 | P2.1/PM_UCB0SIMO/PM_UCB0SDA/COM7 | bidirectional | General-purpose I/O P2.1 with port interrupt, mappable eUSCI_B0 SPI data or I2C data, or LCD common output COM7. |
| 40 | P8.6/TA2.0 | bidirectional | General-purpose digital I/O P8.6 or Timer_A2 CCR0 capture/compare. |
| 41 | P8.7/TA2.1 | bidirectional | General-purpose digital I/O P8.7 or Timer_A2 CCR1 capture/compare. |
| 42 | P9.0/TACLK/RTCCLK | bidirectional | General-purpose digital I/O P9.0, Timer_A clock input TACLK, or RTC clock output RTCCLK. |
| 43 | P2.2/PM_UCA2RXD/PM_UCA2SOMI | bidirectional | General-purpose I/O P2.2 with port interrupt, mappable eUSCI_A2 UART receive or SPI data. |
| 44 | P2.3/PM_UCA2TXD/PM_UCA2SIMO | bidirectional | General-purpose I/O P2.3 with port interrupt, mappable eUSCI_A2 UART transmit or SPI data. |
| 45 | P2.4/PM_UCA1CLK | bidirectional | General-purpose I/O P2.4 with port interrupt or mappable eUSCI_A1 clock. |
| 46 | P2.5/PM_UCA2CLK | bidirectional | General-purpose I/O P2.5 with port interrupt or mappable eUSCI_A2 clock. |
| 47 | P2.6/PM_TA1.0 | bidirectional | General-purpose I/O P2.6 with port interrupt or mappable Timer_A1 CCR0 capture/compare. |
| 48 | P2.7/PM_TA1.1 | bidirectional | General-purpose I/O P2.7 with port interrupt or mappable Timer_A1 CCR1 capture/compare. |
| 49 | P3.0/PM_TA2.0/BSL_TX | bidirectional | General-purpose I/O P3.0 with mappable Timer_A2 CCR0 function, or bootloader data transmit BSL_TX. |
| 50 | P3.1/PM_TA2.1/BSL_RX | bidirectional | General-purpose I/O P3.1 with mappable Timer_A2 CCR1 function, or bootloader data receive BSL_RX. |
| 51 | P3.2/PM_TACLK/PM_RTCCLK | bidirectional | General-purpose I/O P3.2 with mappable Timer_A clock input or RTC clock output. |
| 52 | P3.3/PM_TA0.2 | bidirectional | General-purpose I/O P3.3 with mappable Timer_A0 CCR2 capture/compare. |
| 53 | P3.4/PM_SDCLK/S39 | bidirectional | General-purpose I/O P3.4 with mappable SD24_B bit stream clock, or LCD segment output S39. |
| 54 | P3.5/PM_SD0DIO/S38 | bidirectional | General-purpose I/O P3.5 with mappable SD24_B converter 0 bit stream data, or LCD segment output S38. |
| 55 | P3.6/PM_SD1DIO/S37 | bidirectional | General-purpose I/O P3.6 with mappable SD24_B converter 1 bit stream data, or LCD segment output S37. |
| 56 | P3.7/PM_NONE/S36 | bidirectional | General-purpose I/O P3.7 on F672xA with no SD24_B converter 2 mapping (PM_NONE), or LCD segment output S36. |
| 57 | P4.0/S35 | bidirectional | General-purpose digital I/O P4.0 or LCD segment output S35. |
| 58 | P4.1/S34 | bidirectional | General-purpose digital I/O P4.1 or LCD segment output S34. |
| 59 | P4.2/S33 | bidirectional | General-purpose digital I/O P4.2 or LCD segment output S33. |
| 60 | P4.3/S32 | bidirectional | General-purpose digital I/O P4.3 or LCD segment output S32. |
| 61 | P4.4/S31 | bidirectional | General-purpose digital I/O P4.4 or LCD segment output S31. |
| 62 | P4.5/S30 | bidirectional | General-purpose digital I/O P4.5 or LCD segment output S30. |
| 63 | P4.6/S29 | bidirectional | General-purpose digital I/O P4.6 or LCD segment output S29. |
| 64 | P4.7/S28 | bidirectional | General-purpose digital I/O P4.7 or LCD segment output S28. |
| 65 | P5.0/S27 | bidirectional | General-purpose digital I/O P5.0 or LCD segment output S27. |
| 66 | P5.1/S26 | bidirectional | General-purpose digital I/O P5.1 or LCD segment output S26. |
| 67 | P5.2/S25 | bidirectional | General-purpose digital I/O P5.2 or LCD segment output S25. |
| 68 | P5.3/S24 | bidirectional | General-purpose digital I/O P5.3 or LCD segment output S24. |
| 69 | P5.4/S23 | bidirectional | General-purpose digital I/O P5.4 or LCD segment output S23. |
| 70 | P5.5/S22 | bidirectional | General-purpose digital I/O P5.5 or LCD segment output S22. |
| 71 | P5.6/S21 | bidirectional | General-purpose digital I/O P5.6 or LCD segment output S21. |
| 72 | P5.7/S20 | bidirectional | General-purpose digital I/O P5.7 or LCD segment output S20. |
| 73 | P6.0/S19 | bidirectional | General-purpose digital I/O P6.0 or LCD segment output S19. |
| 74 | DVSYS | power_in | Digital power supply for I/Os; must be connected externally to VDSYS. |
| 75 | DVSS | power_in | Digital ground supply. |
| 76 | P6.1/S18 | bidirectional | General-purpose digital I/O P6.1 or LCD segment output S18. |
| 77 | P6.2/S17 | bidirectional | General-purpose digital I/O P6.2 or LCD segment output S17. |
| 78 | P6.3/S16 | bidirectional | General-purpose digital I/O P6.3 or LCD segment output S16. |
| 79 | P6.4/S15 | bidirectional | General-purpose digital I/O P6.4 or LCD segment output S15. |
| 80 | P6.5/S14 | bidirectional | General-purpose digital I/O P6.5 or LCD segment output S14. |
| 81 | P6.6/S13 | bidirectional | General-purpose digital I/O P6.6 or LCD segment output S13. |
| 82 | P6.7/S12 | bidirectional | General-purpose digital I/O P6.7 or LCD segment output S12. |
| 83 | P7.0/S11 | bidirectional | General-purpose digital I/O P7.0 or LCD segment output S11. |
| 84 | P7.1/S10 | bidirectional | General-purpose digital I/O P7.1 or LCD segment output S10. |
| 85 | P7.2/S9 | bidirectional | General-purpose digital I/O P7.2 or LCD segment output S9. |
| 86 | P7.3/S8 | bidirectional | General-purpose digital I/O P7.3 or LCD segment output S8. |
| 87 | P7.4/S7 | bidirectional | General-purpose digital I/O P7.4 or LCD segment output S7. |
| 88 | P7.5/S6 | bidirectional | General-purpose digital I/O P7.5 or LCD segment output S6. |
| 89 | P7.6/S5 | bidirectional | General-purpose digital I/O P7.6 or LCD segment output S5. |
| 90 | P7.7/S4 | bidirectional | General-purpose digital I/O P7.7 or LCD segment output S4. |
| 91 | P8.0/S3 | bidirectional | General-purpose digital I/O P8.0 or LCD segment output S3. |
| 92 | P8.1/S2 | bidirectional | General-purpose digital I/O P8.1 or LCD segment output S2. |
| 93 | P8.2/S1 | bidirectional | General-purpose digital I/O P8.2 or LCD segment output S1. |
| 94 | P8.3/S0 | bidirectional | General-purpose digital I/O P8.3 or LCD segment output S0. |
| 95 | TEST/SBWTCK | input | Test mode pin that selects digital I/O on JTAG pins, with Spy-Bi-Wire clock input SBWTCK; an internal pulldown is always enabled. |
| 96 | PJ.0/SMCLK/TDO | bidirectional | General-purpose I/O PJ.0, SMCLK clock output, or JTAG test data output TDO. |
| 97 | PJ.1/MCLK/TDI/TCLK | bidirectional | General-purpose I/O PJ.1, MCLK clock output, or JTAG test data input TDI/TCLK. |
| 98 | PJ.2/ADC10CLK/TMS | bidirectional | General-purpose I/O PJ.2, ADC10_A clock output, or JTAG test mode select TMS. |
| 99 | PJ.3/ACLK/TCK | bidirectional | General-purpose I/O PJ.3, ACLK clock output, or JTAG test clock TCK. |
| 100 | RST/NMI/SBWTDIO | bidirectional | Reset input active low with internal pullup enabled by default, nonmaskable interrupt NMI, or Spy-Bi-Wire data I/O SBWTDIO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution and flash programming | VCC | 1.8 | 3.6 | V | PMMCOREVx = 0 | 34 | |
| Supply voltage during program execution and flash programming | VCC | 2 | 3.6 | V | PMMCOREVx = 0, 1 | 34 | |
| Supply voltage during program execution and flash programming | VCC | 2.2 | 3.6 | V | PMMCOREVx = 0, 1, 2 | 34 | |
| Supply voltage during program execution and flash programming | VCC | 2.4 | 3.6 | V | PMMCOREVx = 0, 1, 2, 3 | 34 | |
| Operating free-air temperature | TA | -40 | 85 | °C | I version | 34 | |
| Operating junction temperature | TJ | -40 | 85 | °C | I version | 34 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 8 | MHz | PMMCOREVx = 0, 1.8 V ≤ VCC ≤ 3.6 V | 35 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 12 | MHz | PMMCOREVx = 1, 2.0 V ≤ VCC ≤ 3.6 V | 35 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 20 | MHz | PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V | 35 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 25 | MHz | PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V | 35 | |
| Maximum load current that can be drawn from DVCC for core and IO | ILOAD, DVCCD | 20 | mA | ILOAD = ICORE + IIO | 35 | ||
| Maximum load current that can be drawn from AUXVCC1 for core and IO | ILOAD, AUX1D | 20 | mA | ILOAD = ICORE + IIO | 35 | ||
| Maximum load current that can be drawn from AUXVCC2 for core and IO | ILOAD, AUX2D | 20 | mA | ILOAD = ICORE + IIO | 35 | ||
| Maximum load current that can be drawn from AVCC for analog modules | ILOAD, AVCCA | 10 | mA | ILOAD = IModules | 35 | ||
| Maximum load current that can be drawn from AUXVCC1 for analog modules | ILOAD, AUX1A | 5 | mA | ILOAD = IModules | 35 | ||
| Maximum load current that can be drawn from AUXVCC2 for analog modules | ILOAD, AUX2A | 5 | mA | ILOAD = IModules | 35 | ||
| Voltage applied at DVCC to DVSS | -0.3 | 4.1 | V | 34 | |||
| Voltage applied to pins (all pins except VCORE, SD24_B input pins, AUXVCC1-3) | -0.3 | V | max printed as VCC + 0.3 V | 34 | |||
| Diode current at pins (all pins except SD24_B input pins) | -2 | 2 | mA | 34 | |||
| Diode current at SD24_B input pins | 2 | mA | SD0N0, SD0P0, SD1N0, SD1P0, SD2N0, SD2P0 | 34 | |||
| Maximum junction temperature | TJ | 95 | °C | 34 | |||
| Storage temperature | Tstg | -55 | 105 | °C | 34 | ||
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; For pulldown: VIN = VCC | 44 |
| High-impedance leakage current | Ilkg(Px.y) | -50 | 50 | nA | VCC 1.8 V, 3 V | 44 | |
| BORH off voltage, DVCC rising level | V(DVCC_BOR_IT+) | 0.8 | 1.3 | 1.5 | V | /dDVCC/dt/ < 3 V/s | 50 |
| BORH hysteresis | V(DVCC_BOR_hys) | 50 | 250 | mV | 50 | ||
| SVSH on voltage level | V(SVSH_IT-) | 1.6 | 1.65 | 1.7 | V | SVSHE = 1, SVSHRVL = 0 | 51 |
| Time from trigger (SVM or software) to new supply connected | tSwitch | 100 | ns | 55 | |||
| Recovery time after a switch over | tRecover | 200 | 450 | µs | 55 | ||
| Supply voltage divider V3 = VSupply / 3 | V3 | 0.58 | 0.6 | 0.62 | V | 1.8 V | 55 |
| Supply voltage divider V3 = VSupply / 3 | V3 | 0.98 | 1 | 1.02 | V | 3.0 V | 55 |
| Timer_A input clock frequency | fTA | 25 | MHz | Internal: SMCLK, ACLK; External: TACLK; 1.8 V, 3 V | 56 | ||
| UART receive deglitch time | tt | 10 | 15 | 25 | ns | UCGLITx = 0, 2 V, 3 V | 56 |
| STE lead time, STE active to clock | tSTE,LEAD | 150 | ns | UCSTEM = 0 or 1, UCMODEx = 01 or 10, 2 V, 3 V | 57 | ||
| SOMI input data setup time (SPI master) | tSU,MI | 50 | ns | 2 V | 57 | ||
| SOMI input data setup time (SPI master) | tSU,MI | 30 | ns | 3 V | 57 | ||
| SIMO output data valid time | tVALID,MO | 9 | ns | 2 V; UCLK edge to SIMO valid, CL = 20 pF | 57 | ||
| SIMO output data valid time | tVALID,MO | 5 | ns | 3 V; UCLK edge to SIMO valid, CL = 20 pF | 57 | ||
| SIMO input data setup time (SPI slave) | tSU,SI | 2 | ns | 2.0 V | 59 | ||
| SIMO input data setup time (SPI slave) | tSU,SI | 1 | ns | 3.0 V | 59 | ||
| SOMI output data valid time (SPI slave) | tVALID,SO | 55 | ns | 2.0 V; UCLK edge to SOMI valid, CL = 20 pF | 59 | ||
| SOMI output data valid time (SPI slave) | tVALID,SO | 32 | ns | 3.0 V; UCLK edge to SOMI valid, CL = 20 pF | 59 | ||
| SCL clock frequency | fSCL | 0 | 400 | kHz | 2 V, 3 V | 61 | |
| XT1 oscillator logic-level square-wave input frequency, LF mode | fXT1,LF,SW | 10 | 32.768 | 50 | kHz | XTS = 0, XT1BYPASS = 1 | 41 |
| Duty cycle, LF mode | 30 | 70 | % | XTS = 0, measured at ACLK, fXT1,LF = 32768 Hz | 41 | ||
| Oscillator fault frequency, LF mode | fFault,LF | 10 | 10000 | Hz | XTS = 0 | 41 | |
| VLO frequency | fVLO | 6 | 9.4 | 15 | kHz | Measured at ACLK, 1.8 V to 3.6 V | 42 |
| REFO absolute tolerance calibrated | -3.5 | 3.5 | % | Full temperature range, 1.8 V to 3.6 V | 42 | ||
| REFO absolute tolerance calibrated | -1.5 | 1.5 | % | TA = 25°C, 3 V | 42 | ||
| Port output frequency (with load) | fPx.y | 16 | MHz | VCC = 1.8 V, PMMCOREVx = 0 | 49 | ||
| Port output frequency (with load) | fPx.y | 25 | MHz | VCC = 3 V, PMMCOREVx = 3 | 49 | ||
| Analog supply voltage | AVCC | 2.4 | 3.6 | V | AVCC = DVCC, AVSS = DVSS = 0 V | 64 | |
| Modulator clock frequency | fSD | 0.03 | 2.3 | MHz | 64 | ||
| Integral nonlinearity, end-point fit | INL | -0.01 | 0.01 | % of FSR | SD24GAIN: 1, 8, 32; 3 V; fSD24 = 1 MHz, SD24OSRx = 256 | 65 | |
| Active mode supply current, program executes in flash | IAM, Flash | 0.32 | 0.36 | mA | Flash, 3.0 V, PMMCOREVx = 0, 1 MHz | 36 | |
| Active mode supply current, program executes in flash | IAM, Flash | 2.1 | 2.3 | mA | Flash, 3.0 V, PMMCOREVx = 0, 8 MHz | 36 | |
| Active mode supply current, program executes in RAM | IAM, RAM | 0.2 | 0.22 | mA | RAM, 3.0 V, PMMCOREVx = 0, 1 MHz | 36 | |
| Active mode supply current, program executes in RAM | IAM, RAM | 1.1 | 1.22 | mA | RAM, 3.0 V, PMMCOREVx = 0, 8 MHz | 36 | |
| ON-resistance of switch between DVCC and VDSYS | RON,DVCC | 5 | Ω | ILOAD = ICORE + IIO = 10 mA + 10 mA = 20 mA | 54 | ||
| Junction-to-ambient thermal resistance, still air | RθJA | 45.6 | °C/W | LQFP 100 (PZ) | 39 | ||
| Junction-to-case (top) thermal resistance | RθJC(TOP) | 11 | °C/W | LQFP 100 (PZ) | 39 | ||
| Junction-to-board thermal resistance | RθJB | 23.4 | °C/W | LQFP 100 (PZ) | 39 |
CAD (KiCad official)
- Symbol:
MSP430F6721AIPZR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
msp430f6721aipzr-etched.step/msp430f6721aipzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f6721aipzr.step/msp430f6721aipzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (168 pp, sha256
c5acc9f683a6d5fd, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430F6721AIPZR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
MSP430F6721AIPZR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0P0 | input | SD24_B positive analog input for converter 0. |
| 2 | SD0N0 | input | SD24_B negative analog input for converter 0. |
| 3 | SD1P0 | input | SD24_B positive analog input for converter 1. |
| 4 | SD1N0 | input | SD24_B negative analog input for converter 1. |
| 5 | NC | unconnected | Not connected on MSP430F672xA devices; SD2P0 is only bonded on MSP430F673xA. |
| 6 | NC | unconnected | Not connected on MSP430F672xA devices; SD2N0 is only bonded on MSP430F673xA. |
| 7 | VREF | power_in | SD24_B external reference voltage input. |
| 8 | AVSS | power_in | Analog ground supply. |
| 9 | AVCC | power_in | Analog power supply; TI recommends AVCC and DVCC come from the same source with at most 0.3 V difference. |
| 10 | VASYS | power_out | Analog power supply selected among AVCC, AUXVCC1 and AUXVCC2; connect the recommended CVSYS capacitor. |
| 11 | P9.1/A5 | bidirectional | General-purpose digital I/O P9.1 or ADC10 analog input A5. |
| 12 | P9.2/A4 | bidirectional | General-purpose digital I/O P9.2 or ADC10 analog input A4. |
| 13 | P9.3/A3 | bidirectional | General-purpose digital I/O P9.3 or ADC10 analog input A3. |
| 14 | P1.0/PM_TA0.0/VeREF-/A2 | bidirectional | General-purpose I/O P1.0 with port interrupt, mappable Timer_A0 capture/compare, ADC10 negative reference VeREF- or analog input A2. |
| 15 | P1.1/PM_TA0.1/VeREF+/A1 | bidirectional | General-purpose I/O P1.1 with port interrupt, mappable Timer_A0 capture/compare, ADC10 positive reference VeREF+ or analog input A1. |
| 16 | P1.2/PM_UCA0RXD/PM_UCA0SOMI/A0 | bidirectional | General-purpose I/O P1.2 with port interrupt, mappable eUSCI_A0 UART receive or SPI data, or ADC10 analog input A0. |
| 17 | P1.3/PM_UCA0TXD/PM_UCA0SIMO/R03 | bidirectional | General-purpose I/O P1.3 with port interrupt, mappable eUSCI_A0 UART transmit or SPI data, or LCD voltage input/output R03 (lowest analog LCD voltage V5). |
| 18 | AUXVCC2 | power_in | Auxiliary power supply AUXVCC2; maximum load 20 mA for core and I/O. |
| 19 | AUXVCC1 | power_in | Auxiliary power supply AUXVCC1; maximum load 20 mA for core and I/O. |
| 20 | VDSYS | power_out | Digital power supply selected between DVCC, AUXVCC1 and AUXVCC2; must be connected externally to DVSYS with the recommended CVSYS capacitor. |
| 21 | DVCC | power_in | Digital power supply; absolute maximum voltage DVCC to DVSS is 4.1 V. |
| 22 | DVSS | power_in | Digital ground supply. |
| 23 | VCORE | power_out | Regulated core supply for internal use only; no external loading, connect only the recommended 470 nF capacitor. |
| 24 | XIN | input | Input terminal for the 32-kHz crystal oscillator. |
| 25 | XOUT | output | Output terminal for the 32-kHz crystal oscillator. |
| 26 | AUXVCC3 | power_in | Auxiliary power supply for the backup subsystem (RTC and backup RAM). |
| 27 | P1.4/PM_UCA1RXD/PM_UCA1SOMI/LCDREF/R13 | bidirectional | General-purpose I/O P1.4 with port interrupt, mappable eUSCI_A1 UART receive or SPI data, LCD reference input LCDREF, or LCD voltage R13. |
| 28 | P1.5/PM_UCA1TXD/PM_UCA1SIMO/R23 | bidirectional | General-purpose I/O P1.5 with port interrupt, mappable eUSCI_A1 UART transmit or SPI data, or LCD voltage R23. |
| 29 | LCDCAP/R33 | bidirectional | LCD capacitor connection, or LCD voltage R33 (most positive); must be connected to DVSS if not used. |
| 30 | P8.4/TA1.0 | bidirectional | General-purpose digital I/O P8.4 or Timer_A1 CCR0 capture/compare. |
| 31 | P8.5/TA1.1 | bidirectional | General-purpose digital I/O P8.5 or Timer_A1 CCR1 capture/compare. |
| 32 | COM0 | output | LCD common output COM0 for the LCD backplane. |
| 33 | COM1 | output | LCD common output COM1 for the LCD backplane. |
| 34 | COM2 | output | LCD common output COM2 for the LCD backplane. |
| 35 | COM3 | output | LCD common output COM3 for the LCD backplane. |
| 36 | P1.6/PM_UCA0CLK/COM4 | bidirectional | General-purpose I/O P1.6 with port interrupt, mappable eUSCI_A0 clock, or LCD common output COM4. |
| 37 | P1.7/PM_UCB0CLK/COM5 | bidirectional | General-purpose I/O P1.7 with port interrupt, mappable eUSCI_B0 clock, or LCD common output COM5. |
| 38 | P2.0/PM_UCB0SOMI/PM_UCB0SCL/COM6 | bidirectional | General-purpose I/O P2.0 with port interrupt, mappable eUSCI_B0 SPI data or I2C clock, or LCD common output COM6. |
| 39 | P2.1/PM_UCB0SIMO/PM_UCB0SDA/COM7 | bidirectional | General-purpose I/O P2.1 with port interrupt, mappable eUSCI_B0 SPI data or I2C data, or LCD common output COM7. |
| 40 | P8.6/TA2.0 | bidirectional | General-purpose digital I/O P8.6 or Timer_A2 CCR0 capture/compare. |
| 41 | P8.7/TA2.1 | bidirectional | General-purpose digital I/O P8.7 or Timer_A2 CCR1 capture/compare. |
| 42 | P9.0/TACLK/RTCCLK | bidirectional | General-purpose digital I/O P9.0, Timer_A clock input TACLK, or RTC clock output RTCCLK. |
| 43 | P2.2/PM_UCA2RXD/PM_UCA2SOMI | bidirectional | General-purpose I/O P2.2 with port interrupt, mappable eUSCI_A2 UART receive or SPI data. |
| 44 | P2.3/PM_UCA2TXD/PM_UCA2SIMO | bidirectional | General-purpose I/O P2.3 with port interrupt, mappable eUSCI_A2 UART transmit or SPI data. |
| 45 | P2.4/PM_UCA1CLK | bidirectional | General-purpose I/O P2.4 with port interrupt or mappable eUSCI_A1 clock. |
| 46 | P2.5/PM_UCA2CLK | bidirectional | General-purpose I/O P2.5 with port interrupt or mappable eUSCI_A2 clock. |
| 47 | P2.6/PM_TA1.0 | bidirectional | General-purpose I/O P2.6 with port interrupt or mappable Timer_A1 CCR0 capture/compare. |
| 48 | P2.7/PM_TA1.1 | bidirectional | General-purpose I/O P2.7 with port interrupt or mappable Timer_A1 CCR1 capture/compare. |
| 49 | P3.0/PM_TA2.0/BSL_TX | bidirectional | General-purpose I/O P3.0 with mappable Timer_A2 CCR0 function, or bootloader data transmit BSL_TX. |
| 50 | P3.1/PM_TA2.1/BSL_RX | bidirectional | General-purpose I/O P3.1 with mappable Timer_A2 CCR1 function, or bootloader data receive BSL_RX. |
| 51 | P3.2/PM_TACLK/PM_RTCCLK | bidirectional | General-purpose I/O P3.2 with mappable Timer_A clock input or RTC clock output. |
| 52 | P3.3/PM_TA0.2 | bidirectional | General-purpose I/O P3.3 with mappable Timer_A0 CCR2 capture/compare. |
| 53 | P3.4/PM_SDCLK/S39 | bidirectional | General-purpose I/O P3.4 with mappable SD24_B bit stream clock, or LCD segment output S39. |
| 54 | P3.5/PM_SD0DIO/S38 | bidirectional | General-purpose I/O P3.5 with mappable SD24_B converter 0 bit stream data, or LCD segment output S38. |
| 55 | P3.6/PM_SD1DIO/S37 | bidirectional | General-purpose I/O P3.6 with mappable SD24_B converter 1 bit stream data, or LCD segment output S37. |
| 56 | P3.7/PM_NONE/S36 | bidirectional | General-purpose I/O P3.7 on F672xA with no SD24_B converter 2 mapping (PM_NONE), or LCD segment output S36. |
| 57 | P4.0/S35 | bidirectional | General-purpose digital I/O P4.0 or LCD segment output S35. |
| 58 | P4.1/S34 | bidirectional | General-purpose digital I/O P4.1 or LCD segment output S34. |
| 59 | P4.2/S33 | bidirectional | General-purpose digital I/O P4.2 or LCD segment output S33. |
| 60 | P4.3/S32 | bidirectional | General-purpose digital I/O P4.3 or LCD segment output S32. |
| 61 | P4.4/S31 | bidirectional | General-purpose digital I/O P4.4 or LCD segment output S31. |
| 62 | P4.5/S30 | bidirectional | General-purpose digital I/O P4.5 or LCD segment output S30. |
| 63 | P4.6/S29 | bidirectional | General-purpose digital I/O P4.6 or LCD segment output S29. |
| 64 | P4.7/S28 | bidirectional | General-purpose digital I/O P4.7 or LCD segment output S28. |
| 65 | P5.0/S27 | bidirectional | General-purpose digital I/O P5.0 or LCD segment output S27. |
| 66 | P5.1/S26 | bidirectional | General-purpose digital I/O P5.1 or LCD segment output S26. |
| 67 | P5.2/S25 | bidirectional | General-purpose digital I/O P5.2 or LCD segment output S25. |
| 68 | P5.3/S24 | bidirectional | General-purpose digital I/O P5.3 or LCD segment output S24. |
| 69 | P5.4/S23 | bidirectional | General-purpose digital I/O P5.4 or LCD segment output S23. |
| 70 | P5.5/S22 | bidirectional | General-purpose digital I/O P5.5 or LCD segment output S22. |
| 71 | P5.6/S21 | bidirectional | General-purpose digital I/O P5.6 or LCD segment output S21. |
| 72 | P5.7/S20 | bidirectional | General-purpose digital I/O P5.7 or LCD segment output S20. |
| 73 | P6.0/S19 | bidirectional | General-purpose digital I/O P6.0 or LCD segment output S19. |
| 74 | DVSYS | power_in | Digital power supply for I/Os; must be connected externally to VDSYS. |
| 75 | DVSS | power_in | Digital ground supply. |
| 76 | P6.1/S18 | bidirectional | General-purpose digital I/O P6.1 or LCD segment output S18. |
| 77 | P6.2/S17 | bidirectional | General-purpose digital I/O P6.2 or LCD segment output S17. |
| 78 | P6.3/S16 | bidirectional | General-purpose digital I/O P6.3 or LCD segment output S16. |
| 79 | P6.4/S15 | bidirectional | General-purpose digital I/O P6.4 or LCD segment output S15. |
| 80 | P6.5/S14 | bidirectional | General-purpose digital I/O P6.5 or LCD segment output S14. |
| 81 | P6.6/S13 | bidirectional | General-purpose digital I/O P6.6 or LCD segment output S13. |
| 82 | P6.7/S12 | bidirectional | General-purpose digital I/O P6.7 or LCD segment output S12. |
| 83 | P7.0/S11 | bidirectional | General-purpose digital I/O P7.0 or LCD segment output S11. |
| 84 | P7.1/S10 | bidirectional | General-purpose digital I/O P7.1 or LCD segment output S10. |
| 85 | P7.2/S9 | bidirectional | General-purpose digital I/O P7.2 or LCD segment output S9. |
| 86 | P7.3/S8 | bidirectional | General-purpose digital I/O P7.3 or LCD segment output S8. |
| 87 | P7.4/S7 | bidirectional | General-purpose digital I/O P7.4 or LCD segment output S7. |
| 88 | P7.5/S6 | bidirectional | General-purpose digital I/O P7.5 or LCD segment output S6. |
| 89 | P7.6/S5 | bidirectional | General-purpose digital I/O P7.6 or LCD segment output S5. |
| 90 | P7.7/S4 | bidirectional | General-purpose digital I/O P7.7 or LCD segment output S4. |
| 91 | P8.0/S3 | bidirectional | General-purpose digital I/O P8.0 or LCD segment output S3. |
| 92 | P8.1/S2 | bidirectional | General-purpose digital I/O P8.1 or LCD segment output S2. |
| 93 | P8.2/S1 | bidirectional | General-purpose digital I/O P8.2 or LCD segment output S1. |
| 94 | P8.3/S0 | bidirectional | General-purpose digital I/O P8.3 or LCD segment output S0. |
| 95 | TEST/SBWTCK | input | Test mode pin that selects digital I/O on JTAG pins, with Spy-Bi-Wire clock input SBWTCK; an internal pulldown is always enabled. |
| 96 | PJ.0/SMCLK/TDO | bidirectional | General-purpose I/O PJ.0, SMCLK clock output, or JTAG test data output TDO. |
| 97 | PJ.1/MCLK/TDI/TCLK | bidirectional | General-purpose I/O PJ.1, MCLK clock output, or JTAG test data input TDI/TCLK. |
| 98 | PJ.2/ADC10CLK/TMS | bidirectional | General-purpose I/O PJ.2, ADC10_A clock output, or JTAG test mode select TMS. |
| 99 | PJ.3/ACLK/TCK | bidirectional | General-purpose I/O PJ.3, ACLK clock output, or JTAG test clock TCK. |
| 100 | RST/NMI/SBWTDIO | bidirectional | Reset input active low with internal pullup enabled by default, nonmaskable interrupt NMI, or Spy-Bi-Wire data I/O SBWTDIO. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution and flash programming | VCC | 1.8 | | 3.6 | V | PMMCOREVx = 0 | 34 |
| Supply voltage during program execution and flash programming | VCC | 2 | | 3.6 | V | PMMCOREVx = 0, 1 | 34 |
| Supply voltage during program execution and flash programming | VCC | 2.2 | | 3.6 | V | PMMCOREVx = 0, 1, 2 | 34 |
| Supply voltage during program execution and flash programming | VCC | 2.4 | | 3.6 | V | PMMCOREVx = 0, 1, 2, 3 | 34 |
| Operating free-air temperature | TA | -40 | | 85 | °C | I version | 34 |
| Operating junction temperature | TJ | -40 | | 85 | °C | I version | 34 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | | 8 | MHz | PMMCOREVx = 0, 1.8 V ≤ VCC ≤ 3.6 V | 35 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | | 12 | MHz | PMMCOREVx = 1, 2.0 V ≤ VCC ≤ 3.6 V | 35 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | | 20 | MHz | PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V | 35 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | | 25 | MHz | PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V | 35 |
| Maximum load current that can be drawn from DVCC for core and IO | ILOAD, DVCCD | | | 20 | mA | ILOAD = ICORE + IIO | 35 |
| Maximum load current that can be drawn from AUXVCC1 for core and IO | ILOAD, AUX1D | | | 20 | mA | ILOAD = ICORE + IIO | 35 |
| Maximum load current that can be drawn from AUXVCC2 for core and IO | ILOAD, AUX2D | | | 20 | mA | ILOAD = ICORE + IIO | 35 |
| Maximum load current that can be drawn from AVCC for analog modules | ILOAD, AVCCA | | | 10 | mA | ILOAD = IModules | 35 |
| Maximum load current that can be drawn from AUXVCC1 for analog modules | ILOAD, AUX1A | | | 5 | mA | ILOAD = IModules | 35 |
| Maximum load current that can be drawn from AUXVCC2 for analog modules | ILOAD, AUX2A | | | 5 | mA | ILOAD = IModules | 35 |
| Voltage applied at DVCC to DVSS | | -0.3 | | 4.1 | V | | 34 |
| Voltage applied to pins (all pins except VCORE, SD24_B input pins, AUXVCC1-3) | | -0.3 | | | V | max printed as VCC + 0.3 V | 34 |
| Diode current at pins (all pins except SD24_B input pins) | | -2 | | 2 | mA | | 34 |
| Diode current at SD24_B input pins | | | | 2 | mA | SD0N0, SD0P0, SD1N0, SD1P0, SD2N0, SD2P0 | 34 |
| Maximum junction temperature | TJ | | | 95 | °C | | 34 |
| Storage temperature | Tstg | -55 | | 105 | °C | | 34 |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; For pulldown: VIN = VCC | 44 |
| High-impedance leakage current | Ilkg(Px.y) | -50 | | 50 | nA | VCC 1.8 V, 3 V | 44 |
| BORH off voltage, DVCC rising level | V(DVCC_BOR_IT+) | 0.8 | 1.3 | 1.5 | V | /dDVCC/dt/ < 3 V/s | 50 |
| BORH hysteresis | V(DVCC_BOR_hys) | 50 | | 250 | mV | | 50 |
| SVSH on voltage level | V(SVSH_IT-) | 1.6 | 1.65 | 1.7 | V | SVSHE = 1, SVSHRVL = 0 | 51 |
| Time from trigger (SVM or software) to new supply connected | tSwitch | | | 100 | ns | | 55 |
| Recovery time after a switch over | tRecover | 200 | | 450 | µs | | 55 |
| Supply voltage divider V3 = VSupply / 3 | V3 | 0.58 | 0.6 | 0.62 | V | 1.8 V | 55 |
| Supply voltage divider V3 = VSupply / 3 | V3 | 0.98 | 1 | 1.02 | V | 3.0 V | 55 |
| Timer_A input clock frequency | fTA | | | 25 | MHz | Internal: SMCLK, ACLK; External: TACLK; 1.8 V, 3 V | 56 |
| UART receive deglitch time | tt | 10 | 15 | 25 | ns | UCGLITx = 0, 2 V, 3 V | 56 |
| STE lead time, STE active to clock | tSTE,LEAD | | | 150 | ns | UCSTEM = 0 or 1, UCMODEx = 01 or 10, 2 V, 3 V | 57 |
| SOMI input data setup time (SPI master) | tSU,MI | 50 | | | ns | 2 V | 57 |
| SOMI input data setup time (SPI master) | tSU,MI | 30 | | | ns | 3 V | 57 |
| SIMO output data valid time | tVALID,MO | | | 9 | ns | 2 V; UCLK edge to SIMO valid, CL = 20 pF | 57 |
| SIMO output data valid time | tVALID,MO | | | 5 | ns | 3 V; UCLK edge to SIMO valid, CL = 20 pF | 57 |
| SIMO input data setup time (SPI slave) | tSU,SI | 2 | | | ns | 2.0 V | 59 |
| SIMO input data setup time (SPI slave) | tSU,SI | 1 | | | ns | 3.0 V | 59 |
| SOMI output data valid time (SPI slave) | tVALID,SO | | | 55 | ns | 2.0 V; UCLK edge to SOMI valid, CL = 20 pF | 59 |
| SOMI output data valid time (SPI slave) | tVALID,SO | | | 32 | ns | 3.0 V; UCLK edge to SOMI valid, CL = 20 pF | 59 |
| SCL clock frequency | fSCL | 0 | | 400 | kHz | 2 V, 3 V | 61 |
| XT1 oscillator logic-level square-wave input frequency, LF mode | fXT1,LF,SW | 10 | 32.768 | 50 | kHz | XTS = 0, XT1BYPASS = 1 | 41 |
| Duty cycle, LF mode | | 30 | | 70 | % | XTS = 0, measured at ACLK, fXT1,LF = 32768 Hz | 41 |
| Oscillator fault frequency, LF mode | fFault,LF | 10 | | 10000 | Hz | XTS = 0 | 41 |
| VLO frequency | fVLO | 6 | 9.4 | 15 | kHz | Measured at ACLK, 1.8 V to 3.6 V | 42 |
| REFO absolute tolerance calibrated | | -3.5 | | 3.5 | % | Full temperature range, 1.8 V to 3.6 V | 42 |
| REFO absolute tolerance calibrated | | -1.5 | | 1.5 | % | TA = 25°C, 3 V | 42 |
| Port output frequency (with load) | fPx.y | | | 16 | MHz | VCC = 1.8 V, PMMCOREVx = 0 | 49 |
| Port output frequency (with load) | fPx.y | | | 25 | MHz | VCC = 3 V, PMMCOREVx = 3 | 49 |
| Analog supply voltage | AVCC | 2.4 | | 3.6 | V | AVCC = DVCC, AVSS = DVSS = 0 V | 64 |
| Modulator clock frequency | fSD | 0.03 | | 2.3 | MHz | | 64 |
| Integral nonlinearity, end-point fit | INL | -0.01 | | 0.01 | % of FSR | SD24GAIN: 1, 8, 32; 3 V; fSD24 = 1 MHz, SD24OSRx = 256 | 65 |
| Active mode supply current, program executes in flash | IAM, Flash | | 0.32 | 0.36 | mA | Flash, 3.0 V, PMMCOREVx = 0, 1 MHz | 36 |
| Active mode supply current, program executes in flash | IAM, Flash | | 2.1 | 2.3 | mA | Flash, 3.0 V, PMMCOREVx = 0, 8 MHz | 36 |
| Active mode supply current, program executes in RAM | IAM, RAM | | 0.2 | 0.22 | mA | RAM, 3.0 V, PMMCOREVx = 0, 1 MHz | 36 |
| Active mode supply current, program executes in RAM | IAM, RAM | | 1.1 | 1.22 | mA | RAM, 3.0 V, PMMCOREVx = 0, 8 MHz | 36 |
| ON-resistance of switch between DVCC and VDSYS | RON,DVCC | | | 5 | Ω | ILOAD = ICORE + IIO = 10 mA + 10 mA = 20 mA | 54 |
| Junction-to-ambient thermal resistance, still air | RθJA | | 45.6 | | °C/W | LQFP 100 (PZ) | 39 |
| Junction-to-case (top) thermal resistance | RθJC(TOP) | | 11 | | °C/W | LQFP 100 (PZ) | 39 |
| Junction-to-board thermal resistance | RθJB | | 23.4 | | °C/W | LQFP 100 (PZ) | 39 |
## CAD (KiCad official)
- Symbol: `MSP430F6721AIPZR`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `msp430f6721aipzr-etched.step` / `msp430f6721aipzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430f6721aipzr.step` / `msp430f6721aipzr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430f6721a.pdf) (168 pp, sha256 `c5acc9f683a6d5fd`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430f6721aipzr-datasheet.pdf)