main
Ray Publish 0.1.0 9000a88

MSP430F5504IRGZR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)

MSP430F5504IRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P6.0/A0 bidirectional General-purpose digital I/O with analog input A0 to the ADC on this device.
2 P6.1/A1 bidirectional General-purpose digital I/O with analog input A1 to the ADC on this device.
3 P6.2/A2 bidirectional General-purpose digital I/O with analog input A2 to the ADC on this device.
4 P6.3/A3 bidirectional General-purpose digital I/O with analog input A3 to the ADC on this device.
5 P5.0/A8/VeREF+ bidirectional General-purpose digital I/O, analog input A8, and input for an external ADC reference voltage VeREF+.
6 P5.1/A9/VeREF- bidirectional General-purpose digital I/O, analog input A9, and negative terminal for an externally provided ADC reference VeREF-.
7 AVCC1 power_in Analog power supply.
8 P5.4/XIN bidirectional General-purpose digital I/O and input terminal for crystal oscillator XT1.
9 P5.5/XOUT bidirectional General-purpose digital I/O and output terminal of crystal oscillator XT1.
10 AVSS1 power_in Analog ground supply.
11 DVCC1 power_in Digital power supply.
12 DVSS1 power_in Digital ground supply.
13 VCORE power_out Regulated core power supply output for internal use only; no external current loading is possible and it should only be connected to the recommended capacitor CVCORE.
14 P1.0/TA0CLK/ACLK bidirectional General-purpose digital I/O with port interrupt, TA0CLK timer clock input, and ACLK output divided by 1, 2, 4, 8, 16, or 32.
15 P1.1/TA0.0 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR0 capture input or compare output, and BSL transmit output.
16 P1.2/TA0.1 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR1 capture input or compare output, and BSL receive input.
17 P1.3/TA0.2 bidirectional General-purpose digital I/O with port interrupt, and TA0 CCR2 capture input or compare output.
18 P1.4/TA0.3 bidirectional General-purpose digital I/O with port interrupt, and TA0 CCR3 capture input or compare output.
19 P1.5/TA0.4 bidirectional General-purpose digital I/O with port interrupt, and TA0 CCR4 capture input or compare output.
20 P1.6/TA1CLK bidirectional General-purpose digital I/O with port interrupt and TA1 clock signal TA1CLK input.
21 P1.7/TA1.0 bidirectional General-purpose digital I/O with port interrupt, and TA1 CCR0 capture input or compare output.
22 P2.0/TA1.1 bidirectional General-purpose digital I/O with port interrupt, and TA1 CCR1 capture input or compare output.
23 PJ.0/TDO bidirectional General-purpose digital I/O and JTAG test data output port.
24 PJ.1/TDI/TCLK bidirectional General-purpose digital I/O, JTAG test data input, and test clock input.
25 PJ.2/TMS bidirectional General-purpose digital I/O and JTAG test mode select.
26 PJ.3/TCK bidirectional General-purpose digital I/O and JTAG test clock.
27 DVSS2 power_in Digital ground supply.
28 DVCC2 power_in Digital power supply.
29 P4.0/PM_UCB1STE/PM_UCA1CLK bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave transmit enable or USCI_A1 clock input/output.
30 P4.1/PM_UCB1SIMO/PM_UCB1SDA bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave in master out or I2C data.
31 P4.2/PM_UCB1SOMI/PM_UCB1SCL bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave out master in or I2C clock.
32 P4.3/PM_UCB1CLK/PM_UCA1STE bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 clock input/output or USCI_A1 SPI slave transmit enable.
33 P4.4/PM_UCA1TXD/PM_UCA1SIMO bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_A1 UART transmit data or SPI slave in master out.
34 P4.5/PM_UCA1RXD/PM_UCA1SOMI bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_A1 UART receive data or SPI slave out master in.
35 P4.6/PM_NONE bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping has no secondary function.
36 P4.7/PM_NONE bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping has no secondary function.
37 VSSU power_in USB PHY ground supply.
38 PU.0/DP bidirectional General-purpose digital I/O controlled by the USB control register and USB data terminal DP, supplied from VUSB.
39 PUR bidirectional USB pullup resistor pin (open drain); its voltage level invokes the default USB BSL, with a recommended 1-MΩ resistor to ground.
40 PU.1/DM bidirectional General-purpose digital I/O controlled by the USB control register and USB data terminal DM, supplied from VUSB.
41 VBUS power_in USB LDO input, to be connected to the USB power source.
42 VUSB power_out USB LDO output.
43 V18 power_out USB regulated power for internal use only; no external current loading is possible.
44 AVSS2 power_in Analog ground supply.
45 P5.2/XT2IN bidirectional General-purpose digital I/O and input terminal for crystal oscillator XT2.
46 P5.3/XT2OUT bidirectional General-purpose digital I/O and output terminal of crystal oscillator XT2.
47 TEST/SBWTCK input Test mode pin used to select digital I/O on JTAG pins, and Spy-Bi-Wire input clock.
48 RST/NMI/SBWTDIO bidirectional Reset input (active low, internal pullup enabled by default when configured as reset), nonmaskable interrupt input, and Spy-Bi-Wire data input/output.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS -0.3 4.1 V 19
Diode current at any device pin -2 2 mA 19
Storage temperature, Tstg Tstg -55 150 °C 19
Maximum junction temperature, TJ TJ 95 °C 19
Voltage applied to any pin (excluding VCORE, VBUS, V18) -0.3 V Printed maximum is VCC + 0.3 V 19
Supply voltage during program execution and flash programming VCC 1.8 3.6 V PMMCOREVx = 0; AVCC = DVCC 19
Supply voltage during program execution and flash programming VCC 2 3.6 V PMMCOREVx = 0, 1; AVCC = DVCC 19
Supply voltage during program execution and flash programming VCC 2.2 3.6 V PMMCOREVx = 0, 1, 2; AVCC = DVCC 19
Supply voltage during program execution and flash programming VCC 2.4 3.6 V PMMCOREVx = 0, 1, 2, 3; AVCC = DVCC 19
Operating free-air temperature TA -40 85 °C I version 19
Operating junction temperature TJ -40 85 °C I version 19
Processor frequency (maximum MCLK frequency) fSYSTEM 0 8 MHz PMMCOREVx = 0, 1.8 V ≤ VCC ≤ 3.6 V (default condition) 20
Processor frequency (maximum MCLK frequency) fSYSTEM 0 12 MHz PMMCOREVx = 1, 2.0 V ≤ VCC ≤ 3.6 V 20
Processor frequency (maximum MCLK frequency) fSYSTEM 0 20 MHz PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V 20
Processor frequency (maximum MCLK frequency) fSYSTEM 0 25 MHz PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V 20
Minimum processor frequency for USB operation fSYSTEM_USB 1.5 MHz 20
Active mode supply current, flash execution IAM, Flash 0.25 0.27 mA Flash, VCC 3 V, PMMCOREVx 0, fMCLK 1 MHz 21
Active mode supply current, RAM execution IAM, RAM 0.17 0.19 mA RAM, VCC 3 V, PMMCOREVx 0, fMCLK 1 MHz 21
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC 24
REFO absolute tolerance calibrated, full temperature range -3.5 3.5 % Full temperature range, 1.8 V to 3.6 V 30
REFO absolute tolerance calibrated, TA = 25°C -1.5 1.5 % TA = 25°C, 3 V 30
REFO frequency calibrated fREFO 32768 Hz Measured at ACLK, 1.8 V to 3.6 V 30
REFO frequency temperature drift dfREFO/dT 0.01 %/°C Measured at ACLK, 1.8 V to 3.6 V 30
VLO frequency fVLO 6 9.4 14 kHz Measured at ACLK, 1.8 V to 3.6 V 30
VLO frequency temperature drift dfVLO/dT 0.5 %/°C Measured at ACLK, 1.8 V to 3.6 V 30
Input offset voltage VOFFSET -20 20 mV CBPWRMD = 00 44
Positive built-in reference voltage VREF+ 2.51 V REFVSEL = {2} for 2.5 V, REFON = 1, 3 V 43
Positive built-in reference voltage VREF+ 1.99 V REFVSEL = {1} for 2.0 V, REFON = 1, 3 V 43
Positive built-in reference voltage VREF+ 1.5 V REFVSEL = {0} for 1.5 V, REFON = 1, 2.2 V and 3 V 43
Positive built-in reference voltage tolerance VREF+ -1.5 1.5 % REFON = 1, 3 V 43
Temperature coefficient of built-in reference TCREF+ 50 ppm/°C IVREF+ = 0 A, REFVSEL = {0, 1, 2}, REFON = 1 43
USB LDO output voltage tolerance VUSB -9 9 % USB LDO output voltage 3.3 V 47
VBUS USB bus voltage VBUS 3.76 5.5 V Normal operation 47
Pullup resistance of PUR terminal RPUR 70 110 150 Ω 47
D+, D- single ended output high voltage VOH 2.8 3.6 V USB 2.0 load conditions 47
D+, D- single ended output low voltage VOL 0 0.3 V USB 2.0 load conditions 47
Ports PU.0 and PU.1 high-level input voltage VIH 2 V VUSB = 3.3 V ±10% 45
Ports PU.0 and PU.1 low-level input voltage VIL 0.8 V VUSB = 3.3 V ±10% 45
Junction-to-ambient thermal resistance, still air (RGZ) θJA 28.6 °C/W VQFN (RGZ), natural convection, JEDEC High-K board 23
Junction-to-case (top) thermal resistance (RGZ) θJC(TOP) 14.4 °C/W VQFN (RGZ) 23
Junction-to-case (bottom) thermal resistance (RGZ) θJC(BOTTOM) 1.6 °C/W VQFN (RGZ) 23
Junction-to-board thermal resistance (RGZ) θJB 5.5 °C/W VQFN (RGZ) 23

CAD (KiCad official)

  • Symbol: MSP430F5504IRGZR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: msp430f5504irgzr-etched.step / msp430f5504irgzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430f5504irgzr.step / msp430f5504irgzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (134 pp, sha256 00704c373f824b5a, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF