Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430F5232IRGZR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)

MSP430F5232IRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P6.3/CB3 bidirectional General-purpose digital I/O or Comparator_B input CB3.
2 P6.4/CB4 bidirectional General-purpose digital I/O or Comparator_B input CB4.
3 P6.5/CB5 bidirectional General-purpose digital I/O or Comparator_B input CB5.
4 P5.0 bidirectional General-purpose digital I/O (ADC A8/VeREF+ functions are not available on the ADC-less F523x).
5 P5.1 bidirectional General-purpose digital I/O (ADC A9/VeREF- functions are not available on the ADC-less F523x).
6 AVCC power_in Analog power supply.
7 P5.4/XIN bidirectional General-purpose digital I/O or input terminal for crystal oscillator XT1.
8 P5.5/XOUT bidirectional General-purpose digital I/O or output terminal of crystal oscillator XT1.
9 AVSS power_in Analog ground supply.
10 DVCC power_in Digital power supply.
11 DVSS power_in Digital ground supply.
12 VCORE power_out Regulated core power supply output for internal use only, no external current loading; connect only the recommended 470 nF capacitor.
13 P1.0/TA0CLK/ACLK bidirectional General-purpose digital I/O with port interrupt, TA0CLK input, or ACLK output (divided by 1, 2, 4, 8, 16, or 32).
14 P1.1/TA0.0 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR0 capture/compare, and BSL transmit output.
15 P1.2/TA0.1 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR1 capture/compare, and BSL receive input.
16 P1.3/TA0.2 bidirectional General-purpose digital I/O with port interrupt or TA0 CCR2 capture/compare.
17 P1.4/TA0.3 bidirectional General-purpose digital I/O with port interrupt or TA0 CCR3 capture/compare.
18 P1.5/TA0.4 bidirectional General-purpose digital I/O with port interrupt or TA0 CCR4 capture/compare.
19 P1.6/TA1CLK/CBOUT bidirectional General-purpose digital I/O with port interrupt, TA1CLK input, or Comparator_B output.
20 P1.7/TA1.0 bidirectional General-purpose digital I/O with port interrupt or TA1 CCR0 capture/compare.
21 P2.7/UCB0STE/UCA0CLK bidirectional General-purpose digital I/O, USCI_B0 SPI slave transmit enable, or USCI_A0 SPI clock.
22 P3.0/UCB0SIMO/UCB0SDA bidirectional General-purpose digital I/O, USCI_B0 SPI slave in/master out, or I2C data.
23 P3.1/UCB0SOMI/UCB0SCL bidirectional General-purpose digital I/O, USCI_B0 SPI slave out/master in, or I2C clock.
24 P3.2/UCB0CLK/UCA0STE bidirectional General-purpose digital I/O, USCI_B0 SPI clock, or USCI_A0 SPI slave transmit enable.
25 P3.3/UCA0TXD/UCA0SIMO bidirectional General-purpose digital I/O, USCI_A0 UART transmit data, or SPI slave in/master out.
26 P3.4/UCA0RXD/UCA0SOMI bidirectional General-purpose digital I/O, USCI_A0 UART receive data, or SPI slave out/master in.
27 DVSS power_in Digital ground supply (per Table 7-1; pin diagram shows P4.0 here).
28 DVCC power_in Digital power supply (per Table 7-1; pin diagram shows P4.1 here).
29 P4.0/PM_UCB1STE/PM_UCA1CLK bidirectional General-purpose digital I/O with port mapping; default USCI_B1 SPI slave transmit enable or USCI_A1 SPI clock.
30 P4.1/PM_UCB1SIMO/PM_UCB1SDA bidirectional General-purpose digital I/O with port mapping; default USCI_B1 SPI slave in/master out or I2C data.
31 P4.2/PM_UCB1SOMI/PM_UCB1SCL bidirectional General-purpose digital I/O with port mapping; default USCI_B1 SPI slave out/master in or I2C clock.
32 P4.3/PM_UCB1CLK/PM_UCA1STE bidirectional General-purpose digital I/O with port mapping; default USCI_B1 SPI clock or USCI_A1 SPI slave transmit enable.
33 P4.4/PM_UCA1TXD/PM_UCA1SIMO bidirectional General-purpose digital I/O with port mapping; default USCI_A1 UART transmit data or SPI slave in/master out.
34 P4.5/PM_UCA1RXD/PM_UCA1SOMI bidirectional General-purpose digital I/O with port mapping; default USCI_A1 UART receive data or SPI slave out/master in.
35 P4.6/PM_NONE bidirectional General-purpose digital I/O with port mapping; default mapping has no secondary function.
36 NC unconnected Reserved pin; can be left unconnected or connected to ground.
37 RST/NMI input Active-low reset input and nonmaskable interrupt input; internal pullup enabled by default when configured as reset.
38 P5.2/XT2IN bidirectional General-purpose digital I/O or input terminal for crystal oscillator XT2.
39 P5.3/XT2OUT bidirectional General-purpose digital I/O or output terminal for crystal oscillator XT2.
40 TEST/SBWTCK input Test mode pin selecting four-wire JTAG operation, or Spy-Bi-Wire input clock.
41 PJ.0/TDO bidirectional General-purpose digital I/O or JTAG test data output.
42 PJ.1/TDI/TCLK bidirectional General-purpose digital I/O or JTAG test data input or test clock input.
43 PJ.2/TMS bidirectional General-purpose digital I/O or JTAG test mode select.
44 PJ.3/TCK bidirectional General-purpose digital I/O or JTAG test clock.
45 RSTDVCC/SBWTDIO bidirectional Active-low reset input with nonconfigurable internal pullup to DVCC, or Spy-Bi-Wire data input/output.
46 P6.0/CB0 bidirectional General-purpose digital I/O or Comparator_B input CB0.
47 P6.1/CB1 bidirectional General-purpose digital I/O or Comparator_B input CB1.
48 P6.2/CB2 bidirectional General-purpose digital I/O or Comparator_B input CB2.
49 QFN Pad power_in Exposed QFN thermal pad; connection to VSS is recommended.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 1.8 3.6 V PMMCOREVx = 0 18
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 2 3.6 V PMMCOREVx = 0, 1 18
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 2.2 3.6 V PMMCOREVx = 0, 1, 2 18
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 2.4 3.6 V PMMCOREVx = 0, 1, 2, 3 18
Operating free-air temperature TA -40 85 °C 18
Operating junction temperature TJ -40 85 °C 18
Processor frequency (maximum MCLK frequency) fSYSTEM 0 8 MHz PMMCOREVx = 0 (default condition), 1.8 V ≤ VCC ≤ 3.6 V 18
Processor frequency (maximum MCLK frequency) fSYSTEM 0 12 MHz PMMCOREVx = 1, 2.0 V ≤ VCC ≤ 3.6 V 18
Processor frequency (maximum MCLK frequency) fSYSTEM 0 20 MHz PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V 18
Processor frequency (maximum MCLK frequency) fSYSTEM 0 25 MHz PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V 18
Voltage applied at VCC to VSS VCC -0.3 4.1 V 18
Diode current at any device pin -2 2 mA 18
Storage temperature Tstg -55 150 °C 18
Electrostatic discharge, Human-body model (HBM) V(ESD) -1000 1000 V per ANSI/ESDA/JEDEC JS-001 18
Electrostatic discharge, Charged-device model (CDM) V(ESD) -250 250 V per JEDEC specification JESD22-C101 18
Positive-going input threshold voltage VIT+ 0.8 1.4 V VCC = 1.8 V 23
Positive-going input threshold voltage VIT+ 1.5 2.1 V VCC = 3 V 23
Negative-going input threshold voltage VIT- 0.45 1 V VCC = 1.8 V 23
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V 23
Input voltage hysteresis (VIT+, VIT-) Vhys 0.3 0.8 V VCC = 1.8 V 23
Input voltage hysteresis (VIT+, VIT-) Vhys 0.4 1 V VCC = 3 V 23
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS. For pulldown: VIN = VCC 23
External interrupt timing: external trigger pulse duration to set interrupt flag t(int) 20 ns VCC = 1.8 V, 3 V 23
High-impedance leakage current Ilkg(Px.y) -50 50 nA VCC = 1.8 V, 3 V 23
Port output frequency (with load) fPx.y 16 MHz VCC = 1.8 V, PMMCOREVx = 0 24
Port output frequency (with load) fPx.y 25 MHz VCC = 3 V, PMMCOREVx = 3 24
XT1 oscillator logic-level square-wave input frequency, LF mode fXT1,LF,SW 10 32.768 50 kHz XTS = 0, XT1BYPASS = 1 27
Duty cycle, LF mode 30 70 % XTS = 0, Measured at ACLK, fXT1,LF = 32768 Hz 27
VLO frequency fVLO 6 9.4 14 kHz Measured at ACLK, VCC = 1.8 V to 3.6 V 29
XT2 oscillator crystal frequency, mode 0 fXT2,HF0 4 8 MHz XT2DRIVEx = 0, XT2BYPASS = 0 28
XT2 oscillator crystal frequency, mode 1 fXT2,HF1 8 16 MHz XT2DRIVEx = 1, XT2BYPASS = 0 28
XT2 oscillator crystal frequency, mode 2 fXT2,HF2 16 24 MHz XT2DRIVEx = 2, XT2BYPASS = 0 28
XT2 oscillator crystal frequency, mode 3 fXT2,HF3 24 32 MHz XT2DRIVEx = 3, XT2BYPASS = 0 28
XT2 oscillator logic-level square-wave input frequency, bypass mode fXT2,HF,SW 0.7 32 MHz XT2BYPASS = 1 28
REFO absolute tolerance, calibrated -3.5 3.5 % Full temperature range, 1.8 V to 3.6 V 29
REFO absolute tolerance, calibrated -1.5 1.5 % TA = 25°C, 3 V 29
DCO frequency (0, 0) fDCO(0,0) 0.07 0.2 MHz DCORSELx = 0, DCOx = 0, MODx = 0 30
DCO frequency (0, 31) fDCO(0,31) 0.7 1.7 MHz DCORSELx = 0, DCOx = 31, MODx = 0 30
DCO frequency (1, 0) fDCO(1,0) 0.15 0.36 MHz DCORSELx = 1, DCOx = 0, MODx = 0 30
DCO frequency (1, 31) fDCO(1,31) 1.47 3.45 MHz DCORSELx = 1, DCOx = 31, MODx = 0 30
DCO frequency (2, 0) fDCO(2,0) 0.32 0.75 MHz DCORSELx = 2, DCOx = 0, MODx = 0 30
DCO frequency (2, 31) fDCO(2,31) 3.17 7.38 MHz DCORSELx = 2, DCOx = 31, MODx = 0 30
DCO frequency (3, 0) fDCO(3,0) 0.64 1.51 MHz DCORSELx = 3, DCOx = 0, MODx = 0 30
DCO frequency (3, 31) fDCO(3,31) 6.07 14 MHz DCORSELx = 3, DCOx = 31, MODx = 0 30
DCO frequency (4, 0) fDCO(4,0) 1.3 3.2 MHz DCORSELx = 4, DCOx = 0, MODx = 0 30
DCO frequency (4, 31) fDCO(4,31) 12.3 28.2 MHz DCORSELx = 4, DCOx = 31, MODx = 0 30
DCO frequency (5, 0) fDCO(5,0) 2.5 6 MHz DCORSELx = 5, DCOx = 0, MODx = 0 30
DCO frequency (5, 31) fDCO(5,31) 23.7 54.1 MHz DCORSELx = 5, DCOx = 31, MODx = 0 30
DCO frequency (6, 0) fDCO(6,0) 4.6 10.7 MHz DCORSELx = 6, DCOx = 0, MODx = 0 30
DCO frequency (6, 31) fDCO(6,31) 39 88 MHz DCORSELx = 6, DCOx = 31, MODx = 0 30
DCO frequency (7, 0) fDCO(7,0) 8.5 19.6 MHz DCORSELx = 7, DCOx = 0, MODx = 0 30
DCO frequency (7, 31) fDCO(7,31) 60 135 MHz DCORSELx = 7, DCOx = 31, MODx = 0 30
Supply voltage (Comparator_B) VCC 1.8 3.6 V 44
Program and erase supply voltage (flash) DVCC(PGM/ERASE) 1.8 3.6 V 45
Junction-to-ambient thermal resistance, still air RθJA 27.8 °C/W VQFN 48 (RGZ), still air 22
Junction-to-case (top) thermal resistance RθJC(TOP) 13.6 °C/W VQFN 48 (RGZ) 22
Junction-to-case (bottom) thermal resistance RθJC(BOTTOM) 0.9 °C/W VQFN 48 (RGZ) 22
Junction-to-board thermal resistance RθJB 4.7 °C/W VQFN 48 (RGZ) 22
Junction-to-package-top thermal characterization parameter ΨJT 0.2 °C/W VQFN 48 (RGZ) 22
Junction-to-board thermal characterization parameter ΨJB 4.6 °C/W VQFN 48 (RGZ) 22

CAD (KiCad official)

  • Symbol: MSP430F5232IRGZR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: msp430f5232irgzr-etched.step / msp430f5232irgzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430f5232irgzr.step / msp430f5232irgzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (116 pp, sha256 ef6f4be901450cd1, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF