main
Ray
Publish 0.1.0
12d193b
MSP430F2121IPWR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
MSP430F2121IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEST | input | Selects test mode for JTAG pins on Port1; the device protection fuse is connected to TEST. |
| 2 | VCC | power_in | Supply voltage terminal. |
| 3 | P2.5/CA5 | bidirectional | General-purpose digital I/O pin with Comparator_A+ CA5 input. |
| 4 | VSS | power_in | Ground reference terminal. |
| 5 | XOUT/P2.7/CA7 | bidirectional | Output terminal of the crystal oscillator, also general-purpose digital I/O pin and Comparator_A+ CA7 input; if used as an input, excess current flows until P2SEL.7 is cleared. |
| 6 | XIN/P2.6/CA6 | bidirectional | Input terminal of the crystal oscillator, also general-purpose digital I/O pin and Comparator_A+ CA6 input. |
| 7 | RST/NMI | input | Reset or nonmaskable interrupt input. |
| 8 | P2.0/ACLK/CA2 | bidirectional | General-purpose digital I/O pin with ACLK output and Comparator_A+ CA2 input. |
| 9 | P2.1/INCLK/CA3 | bidirectional | General-purpose digital I/O pin with Timer_A INCLK clock input and Comparator_A+ CA3 input. |
| 10 | P2.2/CAOUT/TA0/CA4 | bidirectional | General-purpose digital I/O pin with Timer_A CCI0B input, BSL receive, Comparator_A+ output and CA4 input. |
| 11 | P2.3/TA1/CA0 | bidirectional | General-purpose digital I/O pin with Timer_A compare Out1 output and Comparator_A+ CA0 input. |
| 12 | P2.4/TA2/CA1 | bidirectional | General-purpose digital I/O pin with Timer_A compare Out2 output and Comparator_A+ CA1 input. |
| 13 | P1.0/TACLK | bidirectional | General-purpose digital I/O pin with Timer_A clock signal TACLK input. |
| 14 | P1.1/TA0 | bidirectional | General-purpose digital I/O pin with Timer_A capture CCI0A input or compare Out0 output, and BSL transmit. |
| 15 | P1.2/TA1 | bidirectional | General-purpose digital I/O pin with Timer_A capture CCI1A input or compare Out1 output. |
| 16 | P1.3/TA2 | bidirectional | General-purpose digital I/O pin with Timer_A capture CCI2A input or compare Out2 output. |
| 17 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O pin with SMCLK signal output and Test Clock input for device programming and test. |
| 18 | P1.5/TA0/TMS | bidirectional | General-purpose digital I/O pin with Timer_A compare Out0 output and Test Mode Select input for device programming and test. |
| 19 | P1.6/TA1/TDI/TCLK | bidirectional | General-purpose digital I/O pin with Timer_A compare Out1 output and Test Data Input or Test Clock Input for programming and test. |
| 20 | P1.7/TA2/TDO/TDI | bidirectional | General-purpose digital I/O pin with Timer_A compare Out2 output and Test Data Output or Test Data Input for programming and test, selected via JTAG instruction. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | During program execution, AVCC = DVCC = VCC | 14 | |
| Supply voltage during flash memory programming | VCC | 2.2 | 3.6 | V | During flash memory programming | 14 | |
| Operating free-air temperature, I version | TA | -40 | 85 | °C | I version | 14 | |
| Processor frequency (maximum MCLK) | fSYSTEM | 0 | 6 | MHz | VCC = 1.8 V, Duty cycle = 50% ±10% | 14 | |
| Processor frequency (maximum MCLK) | fSYSTEM | 0 | 12 | MHz | VCC = 2.7 V, Duty cycle = 50% ±10% | 14 | |
| Processor frequency (maximum MCLK) | fSYSTEM | 0 | 16 | MHz | VCC ≥ 3.3 V, Duty cycle = 50% ±10% | 14 | |
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | Voltage applied at VCC to VSS | 14 | |
| Diode current at any device terminal | -2 | 2 | mA | Diode current at any device terminal | 14 | ||
| Storage temperature, Tstg | Tstg | -55 | 150 | °C | Unprogrammed device | 14 | |
| Active mode (AM) current (1 MHz) | IAM,1MHz | 250 | 300 | µA | fDCO = fMCLK = fSMCLK = 1 MHz, program executes in flash, 2.2 V | 15 | |
| Active mode (AM) current (1 MHz) | IAM,1MHz | 350 | 410 | µA | fDCO = fMCLK = fSMCLK = 1 MHz, program executes in flash, 3 V | 15 | |
| Active mode (AM) current (100 kHz) | IAM,100kHz | 60 | 85 | µA | fMCLK = fSMCLK = fDCO(0,0) ≈ 100 kHz, program executes in flash, 2.2 V | 15 | |
| Active mode (AM) current (100 kHz) | IAM,100kHz | 72 | 95 | µA | fMCLK = fSMCLK = fDCO(0,0) ≈ 100 kHz, program executes in flash, 3 V | 15 | |
| Low-power mode 0 (LPM0) current (1 MHz) | ILPM0,1MHz | 65 | 80 | µA | fSMCLK = fDCO = 1 MHz, fACLK = 32768 Hz, 2.2 V | 16 | |
| Low-power mode 0 (LPM0) current (1 MHz) | ILPM0,1MHz | 85 | 100 | µA | fSMCLK = fDCO = 1 MHz, fACLK = 32768 Hz, 3 V | 16 | |
| Low-power mode 0 (LPM0) current (100 kHz) | ILPM0,100kHz | 37 | 48 | µA | fSMCLK = fDCO(0,0) ≈ 100 kHz, fACLK = 0 Hz, 2.2 V | 16 | |
| Low-power mode 0 (LPM0) current (100 kHz) | ILPM0,100kHz | 41 | 52 | µA | fSMCLK = fDCO(0,0) ≈ 100 kHz, fACLK = 0 Hz, 3 V | 16 | |
| Low-power mode 2 (LPM2) current | ILPM2 | 22 | 29 | µA | -40°C to 85°C, 2.2 V | 16 | |
| Low-power mode 2 (LPM2) current | ILPM2 | 25 | 32 | µA | -40°C to 85°C, 3 V | 16 | |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | 0.7 | 1.2 | µA | -40°C, 2.2 V | 16 | |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | 0.7 | 1 | µA | 25°C, 2.2 V | 16 | |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | 1.6 | 2.3 | µA | 85°C, 2.2 V | 16 | |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | 0.9 | 1.2 | µA | -40°C, 3 V | 16 | |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | 1.6 | 2.8 | µA | 85°C, 3 V | 16 | |
| Low-power mode 4 (LPM4) current | ILPM4 | 0.1 | 0.5 | µA | -40°C, 2.2 V/3 V | 16 | |
| Low-power mode 4 (LPM4) current | ILPM4 | 0.8 | 1.9 | µA | 85°C, 2.2 V/3 V | 16 | |
| Port output frequency (with load) | fPx.y | 10 | MHz | P1.4/SMCLK, CL = 20 pF, RL = 1 kΩ, 2.2 V | 18 | ||
| Port output frequency (with load) | fPx.y | 12 | MHz | P1.4/SMCLK, CL = 20 pF, RL = 1 kΩ, 3 V | 18 | ||
| Clock output frequency | fPort_CLK | 12 | MHz | P2.0/ACLK, P1.4/SMCLK, CL = 20 pF, 2.2 V | 18 | ||
| Clock output frequency | fPort_CLK | 16 | MHz | P2.0/ACLK, P1.4/SMCLK, CL = 20 pF, 3 V | 18 | ||
| POR/brownout reset hysteresis | Vhys(B_IT-) | 70 | 130 | 180 | mV | See Figure 8, dVCC/dt ≤ 3 V/s, -40°C to 85°C | 20 |
| RSELx supply voltage range | VCC | 1.8 | 3.6 | V | RSELx < 14 | 22 | |
| RSELx supply voltage range | VCC | 2.2 | 3.6 | V | RSELx = 14 | 22 | |
| RSELx supply voltage range | VCC | 3 | 3.6 | V | RSELx = 15 | 22 | |
| DCO frequency (0, 0) | fDCO(0,0) | 0.06 | 0.14 | MHz | RSELx = 0, DCOx = 0, MODx = 0, 2.2 V/3 V | 22 | |
| DCO frequency (15, 3) | fDCO(15,3) | 12 | 18.5 | MHz | RSELx = 15, DCOx = 3, MODx = 0, 3 V | 22 | |
| DCO frequency (15, 7) | fDCO(15,7) | 16 | 26 | MHz | RSELx = 15, DCOx = 7, MODx = 0, 3 V | 22 | |
| Frequency tolerance at calibration | -1 | 0.2 | 1 | % | 25°C, 3 V | 23 | |
| 1-MHz calibration value | fCAL(1MHz) | 0.99 | 1 | 1.01 | MHz | BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, 25°C, 3 V, gating time 5 ms | 23 |
| 1-MHz tolerance over VCC | -3 | 2 | 3 | % | 25°C, 1.8 V to 3.6 V | 24 | |
| 8-MHz tolerance over VCC | -3 | 2 | 3 | % | 25°C, 1.8 V to 3.6 V | 24 | |
| 12-MHz tolerance over VCC | -3 | 2 | 3 | % | 25°C, 2.2 V to 3.6 V | 24 | |
| 1-MHz tolerance overall | -5 | 2 | 5 | % | I: -40°C to 85°C, 1.8 V to 3.6 V | 24 | |
| 8-MHz tolerance overall | -5 | 2 | 5 | % | I: -40°C to 85°C, 1.8 V to 3.6 V | 24 | |
| 12-MHz tolerance overall | -5 | 2 | 5 | % | I: -40°C to 85°C, 2.2 V to 3.6 V | 24 | |
| 16-MHz tolerance overall | -6 | 3 | 6 | % | I: -40°C to 85°C, 3 V to 3.6 V | 24 | |
| 1-MHz calibration value overall | fCAL(1MHz) | 0.95 | 1 | 1.05 | MHz | I: -40°C to 85°C, 1.8 V to 3.6 V, gating time 5 ms | 24 |
| 8-MHz calibration value overall | fCAL(8MHz) | 7.6 | 8 | 8.4 | MHz | I: -40°C to 85°C, 1.8 V to 3.6 V, gating time 5 ms | 24 |
| LFXT1 oscillator logic-level square wave input frequency, LF mode | fLFXT1,LF,logic | 10000 | 32768 | 50000 | Hz | XTS = 0, LFXT1Sx = 3, 1.8 V to 3.6 V | 27 |
| Duty cycle, LF mode | 30 | 50 | 70 | % | XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz, 2.2 V/3 V | 27 | |
| Oscillator fault frequency, LF mode | fFault,LF | 10 | 10000 | Hz | XTS = 0, LFXT1Sx = 3, 2.2 V/3 V | 27 | |
| LFXT1 oscillator crystal frequency, HF mode 0 | fLFXT1,HF0 | 0.4 | 1 | MHz | XTS = 1, LFXT1Sx = 0, 1.8 V to 3.6 V | 28 | |
| LFXT1 oscillator crystal frequency, HF mode 1 | fLFXT1,HF1 | 1 | 4 | MHz | XTS = 1, LFXT1Sx = 1, 1.8 V to 3.6 V | 28 | |
| LFXT1 oscillator crystal frequency, HF mode 2 | fLFXT1,HF2 | 2 | 16 | MHz | XTS = 1, LFXT1Sx = 2, 3 V to 3.6 V | 28 | |
| Oscillator fault frequency, HF mode | fFault,HF | 30 | 300 | kHz | XTS = 1, LFXT1Sx = 3, 2.2 V/3 V | 28 | |
| Timer_A clock frequency, internal | fTA | 10 | MHz | Internal: SMCLK, ACLK, 2.2 V | 30 |
CAD (KiCad official)
- Symbol:
MSP430F2121IPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
msp430f2121ipwr-etched.step/msp430f2121ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f2121ipwr.step/msp430f2121ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (68 pp, sha256
0997b19db742fa9b, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430F2121IPWR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
MSP430F2121IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEST | input | Selects test mode for JTAG pins on Port1; the device protection fuse is connected to TEST. |
| 2 | VCC | power_in | Supply voltage terminal. |
| 3 | P2.5/CA5 | bidirectional | General-purpose digital I/O pin with Comparator_A+ CA5 input. |
| 4 | VSS | power_in | Ground reference terminal. |
| 5 | XOUT/P2.7/CA7 | bidirectional | Output terminal of the crystal oscillator, also general-purpose digital I/O pin and Comparator_A+ CA7 input; if used as an input, excess current flows until P2SEL.7 is cleared. |
| 6 | XIN/P2.6/CA6 | bidirectional | Input terminal of the crystal oscillator, also general-purpose digital I/O pin and Comparator_A+ CA6 input. |
| 7 | RST/NMI | input | Reset or nonmaskable interrupt input. |
| 8 | P2.0/ACLK/CA2 | bidirectional | General-purpose digital I/O pin with ACLK output and Comparator_A+ CA2 input. |
| 9 | P2.1/INCLK/CA3 | bidirectional | General-purpose digital I/O pin with Timer_A INCLK clock input and Comparator_A+ CA3 input. |
| 10 | P2.2/CAOUT/TA0/CA4 | bidirectional | General-purpose digital I/O pin with Timer_A CCI0B input, BSL receive, Comparator_A+ output and CA4 input. |
| 11 | P2.3/TA1/CA0 | bidirectional | General-purpose digital I/O pin with Timer_A compare Out1 output and Comparator_A+ CA0 input. |
| 12 | P2.4/TA2/CA1 | bidirectional | General-purpose digital I/O pin with Timer_A compare Out2 output and Comparator_A+ CA1 input. |
| 13 | P1.0/TACLK | bidirectional | General-purpose digital I/O pin with Timer_A clock signal TACLK input. |
| 14 | P1.1/TA0 | bidirectional | General-purpose digital I/O pin with Timer_A capture CCI0A input or compare Out0 output, and BSL transmit. |
| 15 | P1.2/TA1 | bidirectional | General-purpose digital I/O pin with Timer_A capture CCI1A input or compare Out1 output. |
| 16 | P1.3/TA2 | bidirectional | General-purpose digital I/O pin with Timer_A capture CCI2A input or compare Out2 output. |
| 17 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O pin with SMCLK signal output and Test Clock input for device programming and test. |
| 18 | P1.5/TA0/TMS | bidirectional | General-purpose digital I/O pin with Timer_A compare Out0 output and Test Mode Select input for device programming and test. |
| 19 | P1.6/TA1/TDI/TCLK | bidirectional | General-purpose digital I/O pin with Timer_A compare Out1 output and Test Data Input or Test Clock Input for programming and test. |
| 20 | P1.7/TA2/TDO/TDI | bidirectional | General-purpose digital I/O pin with Timer_A compare Out2 output and Test Data Output or Test Data Input for programming and test, selected via JTAG instruction. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution | VCC | 1.8 | | 3.6 | V | During program execution, AVCC = DVCC = VCC | 14 |
| Supply voltage during flash memory programming | VCC | 2.2 | | 3.6 | V | During flash memory programming | 14 |
| Operating free-air temperature, I version | TA | -40 | | 85 | °C | I version | 14 |
| Processor frequency (maximum MCLK) | fSYSTEM | 0 | | 6 | MHz | VCC = 1.8 V, Duty cycle = 50% ±10% | 14 |
| Processor frequency (maximum MCLK) | fSYSTEM | 0 | | 12 | MHz | VCC = 2.7 V, Duty cycle = 50% ±10% | 14 |
| Processor frequency (maximum MCLK) | fSYSTEM | 0 | | 16 | MHz | VCC ≥ 3.3 V, Duty cycle = 50% ±10% | 14 |
| Voltage applied at VCC to VSS | VCC | -0.3 | | 4.1 | V | Voltage applied at VCC to VSS | 14 |
| Diode current at any device terminal | | -2 | | 2 | mA | Diode current at any device terminal | 14 |
| Storage temperature, Tstg | Tstg | -55 | | 150 | °C | Unprogrammed device | 14 |
| Active mode (AM) current (1 MHz) | IAM,1MHz | | 250 | 300 | µA | fDCO = fMCLK = fSMCLK = 1 MHz, program executes in flash, 2.2 V | 15 |
| Active mode (AM) current (1 MHz) | IAM,1MHz | | 350 | 410 | µA | fDCO = fMCLK = fSMCLK = 1 MHz, program executes in flash, 3 V | 15 |
| Active mode (AM) current (100 kHz) | IAM,100kHz | | 60 | 85 | µA | fMCLK = fSMCLK = fDCO(0,0) ≈ 100 kHz, program executes in flash, 2.2 V | 15 |
| Active mode (AM) current (100 kHz) | IAM,100kHz | | 72 | 95 | µA | fMCLK = fSMCLK = fDCO(0,0) ≈ 100 kHz, program executes in flash, 3 V | 15 |
| Low-power mode 0 (LPM0) current (1 MHz) | ILPM0,1MHz | | 65 | 80 | µA | fSMCLK = fDCO = 1 MHz, fACLK = 32768 Hz, 2.2 V | 16 |
| Low-power mode 0 (LPM0) current (1 MHz) | ILPM0,1MHz | | 85 | 100 | µA | fSMCLK = fDCO = 1 MHz, fACLK = 32768 Hz, 3 V | 16 |
| Low-power mode 0 (LPM0) current (100 kHz) | ILPM0,100kHz | | 37 | 48 | µA | fSMCLK = fDCO(0,0) ≈ 100 kHz, fACLK = 0 Hz, 2.2 V | 16 |
| Low-power mode 0 (LPM0) current (100 kHz) | ILPM0,100kHz | | 41 | 52 | µA | fSMCLK = fDCO(0,0) ≈ 100 kHz, fACLK = 0 Hz, 3 V | 16 |
| Low-power mode 2 (LPM2) current | ILPM2 | | 22 | 29 | µA | -40°C to 85°C, 2.2 V | 16 |
| Low-power mode 2 (LPM2) current | ILPM2 | | 25 | 32 | µA | -40°C to 85°C, 3 V | 16 |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | | 0.7 | 1.2 | µA | -40°C, 2.2 V | 16 |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | | 0.7 | 1 | µA | 25°C, 2.2 V | 16 |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | | 1.6 | 2.3 | µA | 85°C, 2.2 V | 16 |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | | 0.9 | 1.2 | µA | -40°C, 3 V | 16 |
| Low-power mode 3 (LPM3) current | ILPM3,LFXT1 | | 1.6 | 2.8 | µA | 85°C, 3 V | 16 |
| Low-power mode 4 (LPM4) current | ILPM4 | | 0.1 | 0.5 | µA | -40°C, 2.2 V/3 V | 16 |
| Low-power mode 4 (LPM4) current | ILPM4 | | 0.8 | 1.9 | µA | 85°C, 2.2 V/3 V | 16 |
| Port output frequency (with load) | fPx.y | | | 10 | MHz | P1.4/SMCLK, CL = 20 pF, RL = 1 kΩ, 2.2 V | 18 |
| Port output frequency (with load) | fPx.y | | | 12 | MHz | P1.4/SMCLK, CL = 20 pF, RL = 1 kΩ, 3 V | 18 |
| Clock output frequency | fPort_CLK | | | 12 | MHz | P2.0/ACLK, P1.4/SMCLK, CL = 20 pF, 2.2 V | 18 |
| Clock output frequency | fPort_CLK | | | 16 | MHz | P2.0/ACLK, P1.4/SMCLK, CL = 20 pF, 3 V | 18 |
| POR/brownout reset hysteresis | Vhys(B_IT-) | 70 | 130 | 180 | mV | See Figure 8, dVCC/dt ≤ 3 V/s, -40°C to 85°C | 20 |
| RSELx supply voltage range | VCC | 1.8 | | 3.6 | V | RSELx < 14 | 22 |
| RSELx supply voltage range | VCC | 2.2 | | 3.6 | V | RSELx = 14 | 22 |
| RSELx supply voltage range | VCC | 3 | | 3.6 | V | RSELx = 15 | 22 |
| DCO frequency (0, 0) | fDCO(0,0) | 0.06 | | 0.14 | MHz | RSELx = 0, DCOx = 0, MODx = 0, 2.2 V/3 V | 22 |
| DCO frequency (15, 3) | fDCO(15,3) | 12 | | 18.5 | MHz | RSELx = 15, DCOx = 3, MODx = 0, 3 V | 22 |
| DCO frequency (15, 7) | fDCO(15,7) | 16 | | 26 | MHz | RSELx = 15, DCOx = 7, MODx = 0, 3 V | 22 |
| Frequency tolerance at calibration | | -1 | 0.2 | 1 | % | 25°C, 3 V | 23 |
| 1-MHz calibration value | fCAL(1MHz) | 0.99 | 1 | 1.01 | MHz | BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, 25°C, 3 V, gating time 5 ms | 23 |
| 1-MHz tolerance over VCC | | -3 | 2 | 3 | % | 25°C, 1.8 V to 3.6 V | 24 |
| 8-MHz tolerance over VCC | | -3 | 2 | 3 | % | 25°C, 1.8 V to 3.6 V | 24 |
| 12-MHz tolerance over VCC | | -3 | 2 | 3 | % | 25°C, 2.2 V to 3.6 V | 24 |
| 1-MHz tolerance overall | | -5 | 2 | 5 | % | I: -40°C to 85°C, 1.8 V to 3.6 V | 24 |
| 8-MHz tolerance overall | | -5 | 2 | 5 | % | I: -40°C to 85°C, 1.8 V to 3.6 V | 24 |
| 12-MHz tolerance overall | | -5 | 2 | 5 | % | I: -40°C to 85°C, 2.2 V to 3.6 V | 24 |
| 16-MHz tolerance overall | | -6 | 3 | 6 | % | I: -40°C to 85°C, 3 V to 3.6 V | 24 |
| 1-MHz calibration value overall | fCAL(1MHz) | 0.95 | 1 | 1.05 | MHz | I: -40°C to 85°C, 1.8 V to 3.6 V, gating time 5 ms | 24 |
| 8-MHz calibration value overall | fCAL(8MHz) | 7.6 | 8 | 8.4 | MHz | I: -40°C to 85°C, 1.8 V to 3.6 V, gating time 5 ms | 24 |
| LFXT1 oscillator logic-level square wave input frequency, LF mode | fLFXT1,LF,logic | 10000 | 32768 | 50000 | Hz | XTS = 0, LFXT1Sx = 3, 1.8 V to 3.6 V | 27 |
| Duty cycle, LF mode | | 30 | 50 | 70 | % | XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz, 2.2 V/3 V | 27 |
| Oscillator fault frequency, LF mode | fFault,LF | 10 | | 10000 | Hz | XTS = 0, LFXT1Sx = 3, 2.2 V/3 V | 27 |
| LFXT1 oscillator crystal frequency, HF mode 0 | fLFXT1,HF0 | 0.4 | | 1 | MHz | XTS = 1, LFXT1Sx = 0, 1.8 V to 3.6 V | 28 |
| LFXT1 oscillator crystal frequency, HF mode 1 | fLFXT1,HF1 | 1 | | 4 | MHz | XTS = 1, LFXT1Sx = 1, 1.8 V to 3.6 V | 28 |
| LFXT1 oscillator crystal frequency, HF mode 2 | fLFXT1,HF2 | 2 | | 16 | MHz | XTS = 1, LFXT1Sx = 2, 3 V to 3.6 V | 28 |
| Oscillator fault frequency, HF mode | fFault,HF | 30 | | 300 | kHz | XTS = 1, LFXT1Sx = 3, 2.2 V/3 V | 28 |
| Timer_A clock frequency, internal | fTA | | | 10 | MHz | Internal: SMCLK, ACLK, 2.2 V | 30 |
## CAD (KiCad official)
- Symbol: `MSP430F2121IPWR`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `msp430f2121ipwr-etched.step` / `msp430f2121ipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430f2121ipwr.step` / `msp430f2121ipwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430f2121.pdf) (68 pp, sha256 `0997b19db742fa9b`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430f2121ipwr-datasheet.pdf)