3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430F2012IPWR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-14
MSP430F2012IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin for the MSP430F20x2 device in the 14-pin TSSOP (PW) package. |
| 2 | P1.0/TACLK/ACLK/A0 | bidirectional | General-purpose digital I/O pin that also serves as Timer_A TACLK input, ACLK signal output, and ADC10 analog input A0. |
| 3 | P1.1/TA0/A1 | bidirectional | General-purpose digital I/O pin that also serves as Timer_A CCI0A capture input, Out0 compare output, and ADC10 analog input A1. |
| 4 | P1.2/TA1/A2 | bidirectional | General-purpose digital I/O pin that also serves as Timer_A CCI1A capture input, Out1 compare output, and ADC10 analog input A2. |
| 5 | P1.3/ADC10CLK/A3/VREF-/VeREF- | bidirectional | General-purpose digital I/O pin that also serves as ADC10 conversion clock output, ADC10 analog input A3, and input for the negative external or internal reference voltage. |
| 6 | P1.4/SMCLK/A4/VREF+/VeREF+/TCK | bidirectional | General-purpose digital I/O pin that also serves as SMCLK signal output, ADC10 analog input A4, input for the positive external or internal reference voltage, and JTAG test clock input for device programming and test. |
| 7 | P1.5/TA0/A5/SCLK/TMS | bidirectional | General-purpose digital I/O pin that also serves as Timer_A Out0 compare output, ADC10 analog input A5, USI external clock input in SPI or I2C mode, and JTAG test mode select input. |
| 8 | P1.6/TA1/A6/SDO/SCL/TDI/TCLK | bidirectional | General-purpose digital I/O pin that also serves as Timer_A CCI1B input and Out1 compare output, ADC10 analog input A6, USI data output in SPI mode or I2C clock, and JTAG test data input or test clock during programming and test. |
| 9 | P1.7/A7/SDI/SDA/TDO/TDI | bidirectional | General-purpose digital I/O pin that also serves as ADC10 analog input A7, USI data input in SPI mode or I2C data, and JTAG test data output or test data input during programming and test (TDO or TDI selected via JTAG instruction). |
| 10 | RST/NMI/SBWTDIO | input | Reset or nonmaskable interrupt input that also serves as Spy-Bi-Wire test data input/output during programming and test. |
| 11 | TEST/SBWTCK | input | Selects test mode for JTAG pins on Port 1, with the device protection fuse connected to TEST, and serves as Spy-Bi-Wire test clock input during programming and test. |
| 12 | XOUT/P2.7 | bidirectional | Output terminal of the crystal oscillator that is also a general-purpose digital I/O pin; if used as an input, excess current flows until P2SEL.7 is cleared. |
| 13 | XIN/P2.6/TA1 | bidirectional | Input terminal of the crystal oscillator that is also a general-purpose digital I/O pin and Timer_A Out1 compare output. |
| 14 | VSS | power_in | Ground reference for the device in the 14-pin TSSOP (PW) package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | During program execution | 20 | |
| Supply voltage during flash program/erase | VCC | 2.2 | 3.6 | V | During flash program/erase | 20 | |
| Operating free-air temperature, I version | TA | -40 | 85 | °C | I version | 20 | |
| Maximum system frequency | fSYSTEM | 6 | MHz | VCC = 1.8 V, duty cycle 50% ± 10% | 20 | ||
| Maximum system frequency | fSYSTEM | 12 | MHz | VCC = 2.7 V, duty cycle 50% ± 10% | 20 | ||
| Maximum system frequency | fSYSTEM | 16 | MHz | VCC ≥ 3.3 V, duty cycle 50% ± 10% | 20 | ||
| Voltage applied at VCC to VSS | -0.3 | 4.1 | V | 20 | |||
| Voltage applied to any pin | -0.3 | V | Referenced to VSS; maximum printed as VCC + 0.3 V | 20 | |||
| Diode current at any device terminal | -2 | 2 | mA | 20 | |||
| Storage temperature, unprogrammed device | Tstg | -55 | 150 | °C | Unprogrammed device | 20 | |
| Storage temperature, programmed device | Tstg | -55 | 150 | °C | Programmed device | 20 | |
| Active mode supply current (1 MHz), flash | IAM,1MHz | 220 | 270 | µA | Program in flash, fDCO=fMCLK=fSMCLK=1 MHz, VCC = 2.2 V | 21 | |
| Active mode supply current (1 MHz), flash | IAM,1MHz | 300 | 370 | µA | Program in flash, fDCO=fMCLK=fSMCLK=1 MHz, VCC = 3 V | 21 | |
| Active mode supply current (1 MHz), RAM | IAM,1MHz | 190 | µA | Program in RAM, fDCO=fMCLK=fSMCLK=1 MHz, VCC = 2.2 V | 21 | ||
| Active mode supply current (1 MHz), RAM | IAM,1MHz | 260 | µA | Program in RAM, fDCO=fMCLK=fSMCLK=1 MHz, VCC = 3 V | 21 | ||
| Active mode supply current (4 kHz) | IAM,4kHz | 1.2 | 3 | µA | -40°C to 85°C, VCC = 2.2 V, program in flash | 21 | |
| Active mode supply current (4 kHz) | IAM,4kHz | 1.6 | 4 | µA | -40°C to 85°C, VCC = 3 V, program in flash | 21 | |
| Active mode supply current (100 kHz) | IAM,100kHz | 37 | 50 | µA | -40°C to 85°C, VCC = 2.2 V, program in flash | 21 | |
| Active mode supply current (100 kHz) | IAM,100kHz | 40 | 55 | µA | -40°C to 85°C, VCC = 3 V, program in flash | 21 | |
| Low-power mode 0 current (1 MHz) | ILPM0,1MHz | 65 | 80 | µA | VCC = 2.2 V, fSMCLK = fDCO = 1 MHz, LPM0 | 23 | |
| Low-power mode 0 current (1 MHz) | ILPM0,1MHz | 85 | 100 | µA | VCC = 3 V, fSMCLK = fDCO = 1 MHz, LPM0 | 23 | |
| Low-power mode 0 current (100 kHz) | ILPM0,100kHz | 37 | 48 | µA | VCC = 2.2 V, fSMCLK = fDCO ≈ 100 kHz, LPM0 | 23 | |
| Low-power mode 0 current (100 kHz) | ILPM0,100kHz | 41 | 52 | µA | VCC = 3 V, fSMCLK = fDCO ≈ 100 kHz, LPM0 | 23 | |
| Low-power mode 2 current | ILPM2 | 22 | 29 | µA | -40°C to 85°C, VCC = 2.2 V, LPM2 | 23 | |
| Low-power mode 2 current | ILPM2 | 25 | 32 | µA | -40°C to 85°C, VCC = 3 V, LPM2 | 23 | |
| Low-power mode 3 current (LFXT1) | ILPM3,LFXT1 | 0.7 | 1.2 | µA | TA = -40°C, VCC = 2.2 V, LPM3 | 23 | |
| Low-power mode 3 current (LFXT1) | ILPM3,LFXT1 | 1.4 | 2.3 | µA | TA = 85°C, VCC = 2.2 V, LPM3 | 23 | |
| Low-power mode 3 current (LFXT1) | ILPM3,LFXT1 | 0.9 | 1.2 | µA | TA = -40°C, VCC = 3 V, LPM3 | 23 | |
| Low-power mode 3 current (LFXT1) | ILPM3,LFXT1 | 1.6 | 2.8 | µA | TA = 85°C, VCC = 3 V, LPM3 | 23 | |
| Low-power mode 3 current (VLO) | ILPM3,VLO | 0.4 | 0.7 | µA | TA = -40°C, VCC = 2.2 V, LPM3 | 23 | |
| Low-power mode 3 current (VLO) | ILPM3,VLO | 1 | 1.6 | µA | TA = 85°C, VCC = 2.2 V, LPM3 | 23 | |
| Low-power mode 3 current (VLO) | ILPM3,VLO | 0.5 | 0.9 | µA | TA = -40°C, VCC = 3 V, LPM3 | 23 | |
| Low-power mode 3 current (VLO) | ILPM3,VLO | 1.3 | 1.8 | µA | TA = 85°C, VCC = 3 V, LPM3 | 23 | |
| Low-power mode 4 current | ILPM4 | 0.1 | 0.5 | µA | TA = -40°C to 25°C, VCC = 2.2 V / 3 V, LPM4 | 23 | |
| Low-power mode 4 current | ILPM4 | 0.8 | 1.5 | µA | TA = 85°C, VCC = 2.2 V / 3 V, LPM4 | 23 | |
| Port output frequency | fPx.y | 10 | MHz | VCC = 2.2 V, P1.4/SMCLK, CL = 20 pF, RL = 1 kΩ | 25 | ||
| Port output frequency | fPx.y | 12 | MHz | VCC = 3 V, P1.4/SMCLK, CL = 20 pF, RL = 1 kΩ | 25 | ||
| Clock output frequency | fPort_CLK | 12 | MHz | VCC = 2.2 V, P2.0/ACLK, P1.4/SMCLK, CL = 20 pF | 25 | ||
| Clock output frequency | fPort_CLK | 16 | MHz | VCC = 3 V, P2.0/ACLK, P1.4/SMCLK, CL = 20 pF | 25 | ||
| Brownout reset threshold | V(B_IT-) | 1.71 | V | dVCC/dt ≤ 3 V/s | 27 | ||
| Brownout hysteresis | Vhys(B_IT-) | 70 | 130 | 210 | mV | dVCC/dt ≤ 3 V/s | 27 |
| Brownout reset duration | td(BOR) | 2000 | µs | 27 | |||
| DCO frequency (0, 0) | fDCO(0,0) | 0.06 | 0.14 | MHz | RSELx = 0, DCOx = 0, MODx = 0, VCC = 2.2 V / 3 V | 29 | |
| DCO frequency (15, 7) | fDCO(15,7) | 16 | 26 | MHz | RSELx = 15, DCOx = 7, MODx = 0, VCC = 3 V | 29 | |
| Frequency step between tap DCO and DCO+1 | SDCO | 1.05 | 1.08 | 1.12 | ratio | VCC = 2.2 V / 3 V | 29 |
| Duty cycle at P1.4/SMCLK | 40 | 50 | 60 | % | Measured at P1.4/SMCLK, VCC = 2.2 V / 3 V | 29 | |
| Frequency tolerance at calibration | -1 | 0.2 | 1 | % | 25°C, VCC = 3 V | 30 | |
| 1-MHz tolerance overall | -5 | 2 | 5 | % | I: -40°C to 85°C, VCC 1.8 V to 3.6 V | 31 | |
| 8-MHz tolerance overall | -5 | 2 | 5 | % | I: -40°C to 85°C, VCC 1.8 V to 3.6 V | 31 | |
| 12-MHz tolerance overall | -5 | 2 | 5 | % | I: -40°C to 85°C, VCC 2.2 V to 3.6 V | 31 | |
| 16-MHz tolerance overall | -6 | 3 | 6 | % | I: -40°C to 85°C, VCC 3 V to 3.6 V | 31 | |
| 1-MHz calibration value overall | fCAL(1MHz) | 0.95 | 1 | 1.05 | MHz | I: -40°C to 85°C, VCC 1.8 V to 3.6 V, gating 5 ms | 31 |
| 8-MHz calibration value overall | fCAL(8MHz) | 7.6 | 8 | 8.4 | MHz | I: -40°C to 85°C, VCC 1.8 V to 3.6 V, gating 5 ms | 31 |
| 12-MHz calibration value overall | fCAL(12MHz) | 11.4 | 12 | 12.6 | MHz | I: -40°C to 85°C, VCC 2.2 V to 3.6 V, gating 5 ms | 31 |
| 16-MHz calibration value overall | fCAL(16MHz) | 15 | 16 | 17 | MHz | I: -40°C to 85°C, VCC 3 V to 3.6 V, gating 2 ms | 31 |
| LFXT1 crystal frequency, LF mode | fLFXT1,LF | 32768 | Hz | XTS = 0, LFXT1Sx = 0 or 1, VCC = 1.8 V to 3.6 V | 34 | ||
| VLO frequency | fVLO | 4 | 12 | 20 | kHz | -40°C to 85°C, VCC = 2.2 V / 3 V | 34 |
| Timer_A clock frequency, internal | fTA | 10 | MHz | Internal SMCLK/ACLK, VCC = 2.2 V | 34 | ||
| Timer_A clock frequency, internal | fTA | 16 | MHz | Internal SMCLK/ACLK, VCC = 3 V | 34 | ||
| USI clock frequency, SPI slave | fUSI | 10 | MHz | External SCLK, duty cycle 50% ±10%, VCC = 2.2 V | 35 | ||
| USI clock frequency, SPI slave | fUSI | 16 | MHz | External SCLK, duty cycle 50% ±10%, VCC = 3 V | 35 | ||
| Analog supply voltage range (ADC10) | VCC | 2.2 | 3.6 | V | VSS = 0 V | 39 | |
| ADC10 supply current | IADC10 | 0.52 | 1.05 | mA | fADC10CLK = 5 MHz, ADC10ON = 1, I: -40°C to 85°C, VCC = 2.2 V | 39 | |
| ADC10 supply current | IADC10 | 0.6 | 1.2 | mA | fADC10CLK = 5 MHz, ADC10ON = 1, VCC = 3 V | 39 | |
| Input capacitance | CI | 27 | pF | Only one terminal Ax selected at a time, I: -40°C to 85°C | 39 | ||
| Input MUX ON resistance | RI | 2000 | Ω | 0 V ≤ VAx ≤ VCC, I: -40°C to 85°C, VCC = 2.2 V / 3 V | 39 | ||
| Integral linearity error | EI | -1 | 1 | LSB | VCC = 2.2 V / 3 V | 42 | |
| Differential linearity error | ED | -1 | 1 | LSB | VCC = 2.2 V / 3 V | 42 | |
| Offset error | EO | -1 | 1 | LSB | Source impedance RS < 100 Ω, VCC = 2.2 V / 3 V | 42 | |
| Temperature sensor supply current | ISENSOR | 40 | 120 | µA | REFON = 0, INCHx = 0Ah, VCC = 2.2 V | 42 | |
| Temperature sensor coefficient | TCSENSOR | 3.44 | 3.55 | 3.66 | mV/°C | ADC10ON = 1, INCHx = 0Ah, VCC = 2.2 V / 3 V | 42 |
| Temperature sensor output voltage at 25°C | VSENSOR | 985 | 1085 | 1185 | mV | TA = 25°C, VCC = 2.2 V / 3 V | 42 |
| Temperature sensor output voltage at 85°C | VSENSOR | 1195 | 1295 | 1395 | mV | TA = 85°C, VCC = 2.2 V / 3 V | 42 |
| Program and erase supply voltage | VCC(PGM/ERASE) | 2.2 | 3.6 | V | Flash program and erase | 47 | |
| Flash timing generator frequency | fFTG | 257 | 476 | kHz | Flash | 47 | |
| Supply current from VCC during program | IPGM | 1 | 5 | mA | VCC = 2.2 V / 3.6 V | 47 | |
| Supply current from VCC during erase | IERASE | 1 | 7 | mA | VCC = 2.2 V / 3.6 V | 47 | |
| Cumulative mass erase time | tCMErase | 20 | ms | VCC = 2.2 V / 3.6 V | 47 | ||
| Internal pulldown resistance on TEST | RInternal | 25 | 60 | 90 | kΩ | VCC = 2.2 V / 3 V | 48 |
| TCK input frequency | fTCK | 0 | 5 | MHz | VCC = 2.2 V | 48 | |
| TCK input frequency | fTCK | 0 | 10 | MHz | VCC = 3 V | 48 | |
| Spy-Bi-Wire input frequency | fSBW | 0 | 20 | MHz | VCC = 2.2 V / 3 V | 48 | |
| Supply voltage during JTAG fuse blow | VFB | 6 | 7 | V | Voltage level on TEST for fuse blow | 48 | |
| Time to blow JTAG fuse | tFB | 1 | ms | 48 |
CAD (KiCad official)
- Symbol:
MSP430F2012IPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
msp430f2012ipwr-etched.step/msp430f2012ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f2012ipwr.step/msp430f2012ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (104 pp, sha256
f41a8064a9540aa9, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).