MSP430F2011TPWR

{
  "slug": "msp430f2011tpwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "msp430f2011tpwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "msp430f2011tpwr.kicad_sym",
    "msp430f2011tpwr.kicad_mod",
    "msp430f2011tpwr.glb",
    "msp430f2011tpwr.step",
    "msp430f2011tpwr.lbr",
    "docs/hero.png",
    "docs/msp430f2011tpwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "msp430f2011tpwr-hero.glb",
    "msp430f2011tpwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "MSP430F2011TPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/msp430f2012",
    "parts": {
      "symbol": "msp430f2011tpwr.kicad_sym",
      "footprint": "msp430f2011tpwr.kicad_mod",
      "model_3d": "msp430f2011tpwr-hero.glb",
      "model_3d_plain": "msp430f2011tpwr.glb",
      "model_3d_step": "msp430f2011tpwr-etched.step",
      "model_3d_step_plain": "msp430f2011tpwr.step",
      "lbr": "msp430f2011tpwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2053069",
      "digikey": "296-19700-2-ND",
      "mouser": "595-MSP430F2011TPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T17:46:50Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-19700-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-MSP430F2011TPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, specified for the 1.8 V to 3.6 V low supply voltage range."
      },
      {
        "number": "2",
        "name": "P1.0/TACLK/ACLK/CA0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Timer_A TACLK/INCLK input, ACLK signal output, and Comparator_A+ CA0 input."
      },
      {
        "number": "3",
        "name": "P1.1/TA0/CA1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Timer_A CCI0A capture input or Out0 compare output and Comparator_A+ CA1 input."
      },
      {
        "number": "4",
        "name": "P1.2/TA1/CA2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Timer_A CCI1A capture input or Out1 compare output and Comparator_A+ CA2 input."
      },
      {
        "number": "5",
        "name": "P1.3/CAOUT/CA3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Comparator_A+ output (CAOUT) and CA3 input."
      },
      {
        "number": "6",
        "name": "P1.4/SMCLK/CA4/TCK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as SMCLK signal output, Comparator_A+ CA4 input, and JTAG test clock (TCK) input for device programming and test."
      },
      {
        "number": "7",
        "name": "P1.5/TA0/CA5/TMS",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Timer_A Out0 compare output, Comparator_A+ CA5 input, and JTAG test mode select (TMS) input for device programming and test."
      },
      {
        "number": "8",
        "name": "P1.6/TA1/CA6/TDI/TCLK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Timer_A Out1 compare output, Comparator_A+ CA6 input, and JTAG test data input or test clock input during programming and test."
      },
      {
        "number": "9",
        "name": "P1.7/CAOUT/CA7/TDO/TDI",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin that also serves as Comparator_A+ output (CAOUT) and CA7 input, and as JTAG test data output (TDO) or test data input (TDI), selected via JTAG instruction."
      },
      {
        "number": "10",
        "name": "RST/NMI/SBWTDIO",
        "type": "input",
        "description": "Reset or nonmaskable interrupt input, and Spy-Bi-Wire test data input/output during programming and test."
      },
      {
        "number": "11",
        "name": "TEST/SBWTCK",
        "type": "input",
        "description": "Selects test mode for the JTAG pins on Port 1 (the device protection fuse is connected to TEST), and serves as Spy-Bi-Wire test clock input during programming and test."
      },
      {
        "number": "12",
        "name": "XOUT/P2.7",
        "type": "bidirectional",
        "description": "Output terminal of the crystal oscillator, also usable as general-purpose digital I/O pin P2.7; if used as an input, excess current flows until P2SEL.7 is cleared."
      },
      {
        "number": "13",
        "name": "XIN/P2.6/TA1",
        "type": "bidirectional",
        "description": "Input terminal of the crystal oscillator, also usable as general-purpose digital I/O pin P2.6 or Timer_A Out1 compare output; used as digital clock input when LFXT1Sx in BCSCTL3 is set to 11."
      },
      {
        "number": "14",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout is taken from Table 2 (Terminal Functions, MSP430F20x1) on page 8, which covers the MSP430F20; Pin 9 (P1.7) and pins 8 and 11 have multiplexed JTAG and Spy-Bi-Wire functions. The datasheet states"
        ],
        "pages_sent": 45,
        "cost_usd": 0.1968,
        "at": "2026-10-08T17:46:34"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/msp430f2012",
        "pages": 104,
        "sha256": "f41a8064a9540aa9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "msp430f2011tpwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "msp430f2011tpwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a079333cb5d21c37a5362d68c4227965e4b6ce4047027218277f0c095d6f9b",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}