Generated by kicad-footprint-generator · KiCad file format 20260206
MSP430F147IPMR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
MSP430F147IPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Digital supply voltage, positive terminal, supplies all digital parts. |
| 2 | P6.3/A3 | bidirectional | General-purpose digital I/O pin and analog input A3 for the ADC. |
| 3 | P6.4/A4 | bidirectional | General-purpose digital I/O pin and analog input A4 for the ADC. |
| 4 | P6.5/A5 | bidirectional | General-purpose digital I/O pin and analog input A5 for the ADC. |
| 5 | P6.6/A6 | bidirectional | General-purpose digital I/O pin and analog input A6 for the ADC. |
| 6 | P6.7/A7 | bidirectional | General-purpose digital I/O pin and analog input A7 for the ADC. |
| 7 | VREF+ | power_in | Output of the positive terminal of the reference voltage in the ADC. |
| 8 | XIN | input | Input port for crystal oscillator XT1, standard or watch crystals can be connected. |
| 9 | XOUT | output | Output terminal of crystal oscillator XT1. |
| 10 | VeREF+ | input | Input for an external reference voltage to the ADC. |
| 11 | VREF-/VeREF- | power_in | Negative terminal for the ADC reference voltage, either the internal reference or an external applied reference voltage. |
| 12 | P1.0/TACLK | bidirectional | General-purpose digital I/O pin and Timer_A clock signal TACLK input. |
| 13 | P1.1/TA0 | bidirectional | General-purpose digital I/O pin, Timer_A capture CCI0A input, compare Out0 output, and BSL transmit. |
| 14 | P1.2/TA1 | bidirectional | General-purpose digital I/O pin, Timer_A capture CCI0A input, compare Out0 output, and BSL transmit. |
| 15 | P1.3/TA2 | bidirectional | General-purpose digital I/O pin, Timer_A capture CCI2A input and compare Out2 output. |
| 16 | P1.4/SMCLK | bidirectional | General-purpose digital I/O pin and SMCLK signal output. |
| 17 | P1.5/TA0 | bidirectional | General-purpose digital I/O pin and Timer_A compare Out0 output. |
| 18 | P1.6/TA1 | bidirectional | General-purpose digital I/O pin and Timer_A compare Out1 output. |
| 19 | P1.7/TA2 | bidirectional | General-purpose digital I/O pin and Timer_A compare Out2 output. |
| 20 | P2.0/ACLK | bidirectional | General-purpose digital I/O pin and ACLK output. |
| 21 | P2.1/TAINCLK | bidirectional | General-purpose digital I/O pin and Timer_A clock signal at INCLK. |
| 22 | P2.2/CAOUT/TA0 | bidirectional | General-purpose digital I/O pin, Comparator_A output, Timer_A capture CCI0B input, and BSL receive. |
| 23 | P2.3/CA0/TA1 | bidirectional | General-purpose digital I/O pin, Timer_A compare Out1 output, and Comparator_A input. |
| 24 | P2.4/CA1/TA2 | bidirectional | General-purpose digital I/O pin, Timer_A compare Out2 output, and Comparator_A input. |
| 25 | P2.5/ROSC | bidirectional | General-purpose digital I/O pin and input for an external resistor defining the DCO nominal frequency. |
| 26 | P2.6/ADC12CLK | bidirectional | General-purpose digital I/O pin and conversion clock for the ADC. |
| 27 | P2.7/TA0 | bidirectional | General-purpose digital I/O pin and Timer_A compare Out0 output. |
| 28 | P3.0/STE0 | bidirectional | General-purpose digital I/O pin and slave transmit enable for USART0 in SPI mode. |
| 29 | P3.1/SIMO0 | bidirectional | General-purpose digital I/O pin and slave in/master out of USART0 in SPI mode. |
| 30 | P3.2/SOMI0 | bidirectional | General-purpose digital I/O pin and slave out/master in of USART0 in SPI mode. |
| 31 | P3.3/UCLK0 | bidirectional | General-purpose digital I/O pin and USART0 clock, external input in UART or SPI mode and output in SPI mode. |
| 32 | P3.4/UTXD0 | bidirectional | General-purpose digital I/O pin and transmit data output for USART0 in UART mode. |
| 33 | P3.5/URXD0 | bidirectional | General-purpose digital I/O pin and receive data input for USART0 in UART mode. |
| 34 | P3.6/UTXD1 | bidirectional | General-purpose digital I/O pin and transmit data output for USART1 in UART mode (MSP430F14x devices only). |
| 35 | P3.7/URXD1 | bidirectional | General-purpose digital I/O pin and receive data input for USART1 in UART mode (MSP430F14x devices only). |
| 36 | P4.0/TB0 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI0A or CCI0B input, and compare Out0 output. |
| 37 | P4.1/TB1 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI1A or CCI1B input, and compare Out1 output. |
| 38 | P4.2/TB2 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI2A or CCI2B input, and compare Out2 output. |
| 39 | P4.3/TB3 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI3A or CCI3B input, and compare Out3 output (MSP430F14x devices only). |
| 40 | P4.4/TB4 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI4A or CCI4B input, and compare Out4 output (MSP430F14x devices only). |
| 41 | P4.5/TB5 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI5A or CCI5B input, and compare Out5 output (MSP430F14x devices only). |
| 42 | P4.6/TB6 | bidirectional | General-purpose digital I/O pin, Timer_B capture CCI6A or CCI6B input, and compare Out6 output (MSP430F14x devices only). |
| 43 | P4.7/TBCLK | bidirectional | General-purpose digital I/O pin and Timer_B clock signal TBCLK input. |
| 44 | P5.0/STE1 | bidirectional | General-purpose digital I/O pin and slave transmit enable for USART1 in SPI mode (MSP430F14x devices only). |
| 45 | P5.1/SIMO1 | bidirectional | General-purpose digital I/O pin and slave in/master out of USART1 in SPI mode (MSP430F14x devices only). |
| 46 | P5.2/SOMI1 | bidirectional | General-purpose digital I/O pin and slave out/master in of USART1 in SPI mode (MSP430F14x devices only). |
| 47 | P5.3/UCLK1 | bidirectional | General-purpose digital I/O pin and USART1 clock, external input in UART or SPI mode and output in SPI mode (MSP430F14x devices only). |
| 48 | P5.4/MCLK | bidirectional | General-purpose digital I/O pin and main system clock MCLK output. |
| 49 | P5.5/SMCLK | bidirectional | General-purpose digital I/O pin and submain system clock SMCLK output. |
| 50 | P5.6/ACLK | bidirectional | General-purpose digital I/O pin and auxiliary clock ACLK output. |
| 51 | P5.7/TBOUTH | bidirectional | General-purpose digital I/O pin, which switches all PWM digital output ports to high impedance for Timer_B7 (TB0 to TB6). |
| 52 | XT2OUT | output | Output terminal of crystal oscillator XT2. |
| 53 | XT2IN | input | Input port for crystal oscillator XT2, only standard crystals can be connected. |
| 54 | TDO/TDI | bidirectional | Test data output or programming data input. |
| 55 | TDI/TCLK | input | Test data input or test clock input, the device protection fuse is connected to this pin. |
| 56 | TMS | input | Test mode select, used as an input port for device programming and test. |
| 57 | TCK | input | Test clock, the clock input port for device programming test and bootloader start. |
| 58 | RST/NMI | input | Reset input, nonmaskable interrupt input port, and bootloader start. |
| 59 | P6.0/A0 | bidirectional | General-purpose digital I/O pin and analog input A0 for the ADC. |
| 60 | P6.1/A1 | bidirectional | General-purpose digital I/O pin and analog input A1 for the ADC. |
| 61 | P6.2/A2 | bidirectional | General-purpose digital I/O pin and analog input A2 for the ADC. |
| 62 | AVSS | power_in | Analog supply voltage, negative terminal, supplies the analog portion of the ADC. |
| 63 | DVSS | power_in | Digital supply voltage, negative terminal, supplies all digital parts. |
| 64 | AVCC | power_in | Analog supply voltage, positive terminal, supplies the analog portion of the ADC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (AVCC = DVCC = VCC) | VCC | 1.8 | 3.6 | V | During program execution | 16 | |
| Supply voltage during flash memory programming | VCC | 2.7 | 3.6 | V | During flash memory programming | 16 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 16 | ||
| Processor frequency (signal MCLK) | fSYSTEM | 4.15 | MHz | VCC = 1.8 V (minimum printed as DC) | 16 | ||
| Processor frequency (signal MCLK) | fSYSTEM | 8 | MHz | VCC = 3.6 V (minimum printed as DC) | 16 | ||
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | 16 | ||
| Voltage applied to any pin | -0.3 | V | Maximum printed as VCC + 0.3 V | 16 | |||
| Diode current at any device terminal | -2 | 2 | mA | 16 | |||
| Storage temperature, programmed device | -40 | 85 | °C | Programmed device | 16 | ||
| Storage temperature, unprogrammed device | -55 | 150 | °C | Unprogrammed device | 16 | ||
| Active mode supply current | I(AM) | 280 | 360 | µA | f(MCLK) = f(SMCLK) = 1 MHz, f(ACLK) = 32768 Hz, XTS = 0, SELM = 0 or 1; -40°C to 85°C; VCC 2.2 V | 17 | |
| Active mode supply current | I(AM) | 420 | 560 | µA | f(MCLK) = f(SMCLK) = 1 MHz, f(ACLK) = 32768 Hz, XTS = 0, SELM = 0 or 1; -40°C to 85°C; VCC 3 V | 17 | |
| Active mode supply current | I(AM) | 2.5 | 7 | µA | f(MCLK) = f(SMCLK) = f(ACLK) = 4096 Hz, XTS = 0, SELM = 3; -40°C to 85°C; VCC 2.2 V | 17 | |
| Active mode supply current | I(AM) | 9 | 20 | µA | f(MCLK) = f(SMCLK) = f(ACLK) = 4096 Hz, XTS = 0, SELM = 3; -40°C to 85°C; VCC 3 V | 17 | |
| Low-power mode 0 supply current | I(LPM0) | 32 | 45 | µA | -40°C to 85°C; VCC 2.2 V | 17 | |
| Low-power mode 0 supply current | I(LPM0) | 55 | 70 | µA | -40°C to 85°C; VCC 3 V | 17 | |
| Low-power mode 2 supply current | I(LPM2) | 11 | 14 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 0; -40°C to 85°C; VCC 2.2 V | 17 | |
| Low-power mode 2 supply current | I(LPM2) | 17 | 22 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 0; -40°C to 85°C; VCC 3 V | 17 | |
| Low-power mode 3 supply current | I(LPM3) | 0.8 | 1.5 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 1; TA = -40°C; VCC 2.2 V | 17 | |
| Low-power mode 3 supply current | I(LPM3) | 0.9 | 1.5 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 1; TA = 25°C; VCC 2.2 V | 17 | |
| Low-power mode 3 supply current | I(LPM3) | 1.6 | 2.8 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 1; TA = 85°C; VCC 2.2 V | 17 | |
| Low-power mode 3 supply current | I(LPM3) | 1.8 | 2.2 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 1; TA = -40°C; VCC 3 V | 17 | |
| Low-power mode 3 supply current | I(LPM3) | 1.6 | 1.9 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 1; TA = 25°C; VCC 3 V | 17 | |
| Low-power mode 3 supply current | I(LPM3) | 2.3 | 3.9 | µA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32768 Hz, SCG0 = 1; TA = 85°C; VCC 3 V | 17 | |
| Low-power mode 4 supply current | I(LPM4) | 0.1 | 0.5 | µA | f(MCLK) = f(SMCLK) = f(ACLK) = 0 MHz, SCG0 = 1; TA = -40°C; VCC 2.2 V | 17 | |
| Low-power mode 4 supply current | I(LPM4) | 0.8 | 2.5 | µA | f(MCLK) = f(SMCLK) = f(ACLK) = 0 MHz, SCG0 = 1; TA = 85°C; VCC 2.2 V | 17 | |
| Positive-going input threshold voltage | VIT+ | 1.1 | 1.5 | V | VCC 2.2 V | 18 | |
| Positive-going input threshold voltage | VIT+ | 1.5 | 1.9 | V | VCC 3 V | 18 | |
| Negative-going input threshold voltage | VIT- | 0.4 | 0.9 | V | VCC 2.2 V | 18 | |
| Negative-going input threshold voltage | VIT- | 0.9 | 1.3 | V | VCC 3 V | 18 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.3 | 1.1 | V | VCC 2.2 V | 18 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.5 | 1 | V | VCC 3 V | 18 | |
| External interrupt timing | t(int) | 1.5 | cycle | Port P1.x and P2.x, external trigger pulse duration to set interrupt flag; VCC 2.2 V, 3 V | 18 | ||
| External interrupt timing | t(int) | 62 | ns | Port P1.x and P2.x, external trigger pulse duration to set interrupt flag; VCC 2.2 V | 18 | ||
| External interrupt timing | t(int) | 50 | ns | Port P1.x and P2.x, external trigger pulse duration to set interrupt flag; VCC 3 V | 18 | ||
| Timer A or Timer B capture timing | t(cap) | 62 | ns | TA0, TA1, TA2, TB0 to TB6; VCC 2.2 V | 18 | ||
| Timer A or Timer B capture timing | t(cap) | 50 | ns | TA0, TA1, TA2, TB0 to TB6; VCC 3 V | 18 | ||
| Timer_A or Timer_B clock frequency externally applied | f(TAext), f(TBext) | 8 | MHz | Applied to pin TACLK, TBCLK, INCLK: t(H) = t(L); VCC 2.2 V | 18 | ||
| Timer_A or Timer_B clock frequency externally applied | f(TAext), f(TBext) | 10 | MHz | Applied to pin TACLK, TBCLK, INCLK: t(H) = t(L); VCC 3 V | 18 | ||
| Timer_A or Timer_B clock frequency, SMCLK or ACLK selected | f(TAint), f(TBint) | 8 | MHz | SMCLK or ACLK signal selected; VCC 2.2 V | 19 | ||
| Timer_A or Timer_B clock frequency, SMCLK or ACLK selected | f(TAint), f(TBint) | 10 | MHz | SMCLK or ACLK signal selected; VCC 3 V | 19 | ||
| Leakage current, Port P1 | Ilkg(P1.x) | -50 | 50 | nA | Port P1, V(P1.x); VCC 2.2 V, 3 V | 19 | |
| Leakage current, Port P2 | Ilkg(P2.x) | -50 | 50 | nA | Port P2, V(P2.3), V(P2.4); VCC 2.2 V, 3 V | 19 | |
| Leakage current, Port P6 | Ilkg(P6.x) | -50 | 50 | nA | Port P6, V(P6.x); VCC 2.2 V, 3 V | 19 | |
| Comparator_A supply current | I(DD) | 25 | 40 | µA | CAON = 1, CARSEL = 0, CAREF = 0; VCC 2.2 V | 21 | |
| Comparator_A supply current | I(DD) | 45 | 60 | µA | CAON = 1, CARSEL = 0, CAREF = 0; VCC 3 V | 21 | |
| Reference voltage (RefVT) | V(RefVT) | 390 | 480 | 540 | mV | PCA0 = 1, CARSEL = 1, CAREF = 3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, TA = 85°C; VCC 2.2 V | 21 |
| Reference voltage (RefVT) | V(RefVT) | 400 | 490 | 550 | mV | PCA0 = 1, CARSEL = 1, CAREF = 3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, TA = 85°C; VCC 3 V | 21 |
| Offset voltage | V(offset) | -30 | 30 | mV | VCC 2.2 V, 3 V | 21 | |
| Thermal resistance, junction-to-ambient, still air | RθJA | 52 | °C/W | 64-PIN PM package | 18 | ||
| Thermal resistance, junction-to-case (top) | RθJC(TOP) | 14.4 | °C/W | 64-PIN PM package | 18 | ||
| Thermal resistance, junction-to-board | RθJB | 23 | °C/W | 64-PIN PM package | 18 | ||
| Junction-to-board thermal characterization parameter | ΨJB | 22.7 | °C/W | 64-PIN PM package | 18 | ||
| Junction-to-top thermal characterization parameter | ΨJT | 0.6 | °C/W | 64-PIN PM package | 18 |
CAD (KiCad official)
- Symbol:
MSP430F147IPMR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
msp430f147ipmr-etched.step/msp430f147ipmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f147ipmr.step/msp430f147ipmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (88 pp, sha256
1567e28e41146e98, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).