Generated by kicad-footprint-generator · KiCad file format 20260206
MSP430F123IDWR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · SOIC-28-300mil
MSP430F123IDWR from Texas Instruments, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEST | input | Selects test mode for the JTAG pins on Port 1; it has an internal pull-down of 25 to 90 kΩ (60 kΩ typical). |
| 2 | VCC | power_in | Supply voltage, specified over the 1.8 V to 3.6 V low supply voltage range. |
| 3 | P2.5/ROSC | bidirectional | General-purpose digital I/O pin and input for the external resistor that defines the DCO nominal frequency. |
| 4 | VSS | power_in | Ground reference. |
| 5 | XOUT | output | Output terminal of the crystal oscillator (LFXT1). |
| 6 | XIN | input | Input terminal of the crystal oscillator (LFXT1). |
| 7 | RST/NMI | input | Reset or nonmaskable interrupt input. |
| 8 | P2.0/ACLK | bidirectional | General-purpose digital I/O pin with ACLK output. |
| 9 | P2.1/INCLK | bidirectional | General-purpose digital I/O pin and Timer_A clock signal input at INCLK. |
| 10 | P2.2/CAOUT/TA0 | bidirectional | General-purpose digital I/O pin with Timer_A CCI0B capture input, comparator_A output, and BSL receive function. |
| 11 | P3.0/STE0 | bidirectional | General-purpose digital I/O pin and slave transmit enable for USART0 in SPI mode. |
| 12 | P3.1/SIMO0 | bidirectional | General-purpose digital I/O pin and slave in/master out for USART0 in SPI mode. |
| 13 | P3.2/SOMI0 | bidirectional | General-purpose digital I/O pin and slave out/master in for USART0 in SPI mode. |
| 14 | P3.3/UCLK0 | bidirectional | General-purpose digital I/O pin and USART0 external clock input in UART or SPI mode, or clock output in SPI master mode. |
| 15 | P3.4/UTXD0 | bidirectional | General-purpose digital I/O pin and USART0 transmit data output in UART mode. |
| 16 | P3.5/URXD0 | bidirectional | General-purpose digital I/O pin and USART0 receive data input in UART mode. |
| 17 | P3.6 | bidirectional | General-purpose digital I/O pin. |
| 18 | P3.7 | bidirectional | General-purpose digital I/O pin. |
| 19 | P2.3/CA0/TA1 | bidirectional | General-purpose digital I/O pin with Timer_A Out1 output and comparator_A input CA0. |
| 20 | P2.4/CA1/TA2 | bidirectional | General-purpose digital I/O pin with Timer_A Out2 output and comparator_A input CA1. |
| 21 | P1.0/TACLK | bidirectional | General-purpose digital I/O pin and Timer_A clock signal TACLK input. |
| 22 | P1.1/TA0 | bidirectional | General-purpose digital I/O pin with Timer_A CCI0A capture input, Out0 compare output, and BSL transmit function. |
| 23 | P1.2/TA1 | bidirectional | General-purpose digital I/O pin with Timer_A CCI1A capture input and Out1 compare output. |
| 24 | P1.3/TA2 | bidirectional | General-purpose digital I/O pin with Timer_A CCI2A capture input and Out2 compare output. |
| 25 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O pin with SMCLK signal output and test clock input for device programming and test. |
| 26 | P1.5/TA0/TMS | bidirectional | General-purpose digital I/O pin with Timer_A Out0 compare output and test mode select input for device programming and test. |
| 27 | P1.6/TA1/TDI/TCLK | bidirectional | General-purpose digital I/O pin with Timer_A Out1 compare output and test data input or test clock input. |
| 28 | P1.7/TA2/TDO/TDI | bidirectional | General-purpose digital I/O pin with Timer_A Out2 compare output and test data output or data input during programming (TDO or TDI selected via JTAG instruction). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VCC to VSS | -0.3 | 4.1 | V | 12 | |||
| Voltage applied to any pin (see Note) | -0.3 | V | All voltages referenced to VSS; max printed as VCC+0.3 V | 12 | |||
| Diode current at any device terminal | -2 | 2 | mA | 12 | |||
| Storage temperature, Tstg (unprogrammed device) | Tstg | -55 | 150 | °C | unprogrammed device | 12 | |
| Storage temperature, Tstg (programmed device) | Tstg | -40 | 85 | °C | programmed device | 12 | |
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | see Note 1 | 12 | |
| Supply voltage during program/erase flash memory | VCC | 2.7 | 3.6 | V | 12 | ||
| Operating free-air temperature range | TA | -40 | 85 | °C | 12 | ||
| LFXT1 crystal frequency, ceramic resonator | f(LFXT1) | 450 | 8000 | kHz | XT1 selected mode, XTS=1, ceramic resonator | 12 | |
| LFXT1 crystal frequency, crystal | f(LFXT1) | 1000 | 8000 | kHz | XT1 selected mode, XTS=1, crystal | 12 | |
| Processor frequency f(system) (MCLK signal) | f(system) | 4.15 | MHz | VCC = 1.8 V | 12 | ||
| Processor frequency f(system) (MCLK signal) | f(system) | 8 | MHz | VCC = 3.6 V | 12 | ||
| Active mode supply current | I(AM) | 200 | 250 | μA | TA = −40°C to 85°C, fMCLK = f(SMCLK) = 1 MHz, VCC = 2.2 V | 13 | |
| Active mode supply current | I(AM) | 300 | 350 | μA | fMCLK = f(SMCLK) = 1 MHz, f(ACLK) = 32,768 Hz, program executes in Flash, VCC = 3 V | 13 | |
| Low-power mode (LPM0) supply current | I(CPUOff) | 32 | 45 | μA | TA = −40°C to 85°C, f(MCLK) = 0, f(SMCLK) = 1 MHz, f(ACLK) = 32,768 Hz, VCC = 2.2 V | 13 | |
| Low-power mode (LPM0) supply current | I(CPUOff) | 55 | 70 | μA | f(MCLK) = 0, f(SMCLK) = 1 MHz, f(ACLK) = 32,768 Hz, VCC = 3 V | 13 | |
| Low-power mode (LPM2) supply current | I(LPM2) | 11 | 14 | μA | TA = −40°C to 85°C, f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32,768 Hz, SCG0 = 0, VCC = 2.2 V | 13 | |
| Low-power mode (LPM2) supply current | I(LPM2) | 17 | 22 | μA | f(MCLK) = f(SMCLK) = 0 MHz, f(ACLK) = 32,768 Hz, SCG0 = 0, VCC = 3 V | 13 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 0.8 | 1.2 | μA | TA = −40°C | 13 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 0.7 | 1 | μA | TA = 25°C, VCC = 2.2 V | 13 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1.6 | 2.3 | μA | TA = 85°C | 13 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1.8 | 2.2 | μA | TA = −40°C | 13 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1.6 | 1.9 | μA | TA = 25°C, VCC = 3 V | 13 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 2.3 | 3.4 | μA | TA = 85°C | 13 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 0.1 | 0.5 | μA | TA = −40°C | 13 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 0.8 | 1.9 | μA | TA = 85°C | 13 | |
| Positive-going input threshold voltage, Schmitt-trigger inputs | VIT+ | 1.1 | 1.5 | V | VCC = 2.2 V | 14 | |
| Positive-going input threshold voltage, Schmitt-trigger inputs | VIT+ | 1.5 | 1.9 | V | VCC = 3 V | 14 | |
| Negative-going input threshold voltage, Schmitt-trigger inputs | VIT− | 0.4 | 0.9 | V | VCC = 2.2 V | 14 | |
| Negative-going input threshold voltage, Schmitt-trigger inputs | VIT− | 0.9 | 1.3 | V | VCC = 3 V | 14 | |
| Input voltage hysteresis (VIT+ − VIT−), Schmitt-trigger inputs | Vhys | 0.3 | 1.1 | V | VCC = 2.2 V | 14 | |
| Input voltage hysteresis (VIT+ − VIT−), Schmitt-trigger inputs | Vhys | 0.5 | 1 | V | VCC = 3 V | 14 | |
| External interrupt timing t(int) | t(int) | 1.5 | cycle | Port P1, P2: P1.x to P2.x, external; VCC = 2.2 V/3 V | 14 | ||
| External trigger signal for the interrupt flag t(int) | t(int) | 62 | ns | Port P1, P2: P1.x to P2.x; VCC = 2.2 V | 14 | ||
| External trigger signal for the interrupt flag t(int) | t(int) | 50 | ns | Port P1, P2: P1.x to P2.x; VCC = 3 V | 14 | ||
| Timer_A capture timing | t(cap) | 62 | ns | TA0, TA1, TA2; VCC = 2.2 V | 14 | ||
| Timer_A capture timing | t(cap) | 50 | ns | TA0, TA1, TA2; VCC = 3 V | 14 | ||
| Timer_A clock frequency externally applied to pin TACLK, INCLK | f(TAext) | 8 | MHz | t(H) = t(L); VCC = 2.2 V | 14 | ||
| Timer_A clock frequency externally applied to pin TACLK, INCLK | f(TAext) | 10 | MHz | t(H) = t(L); VCC = 3 V | 14 | ||
| High-impedance leakage current, Port P1 | Ilkg(Px.x) | -50 | 50 | nA | Port P1: P1.x, 0 ≤ x ≤ 7; VCC = 2.2 V/3 V | 14 | |
| High-impedance leakage current, Port P2 | Ilkg(Px.x) | -50 | 50 | nA | Port P2: P2.x, 0 ≤ x ≤ 5; VCC = 2.2 V/3 V | 14 | |
| RAM retention supply voltage V(RAMh) | V(RAMh) | 1.6 | V | CPU halted | 17 | ||
| JTAG TCK input frequency | fTCK | 0 | 5 | MHz | VCC = 2.2 V | 23 | |
| JTAG TCK input frequency | fTCK | 0 | 10 | MHz | VCC = 3 V | 23 | |
| Internal pull-down resistance on TEST | RInternal | 25 | 60 | 90 | kΩ | VCC = 2.2 V/3 V | 23 |
| Program and erase supply voltage | VCC(PGM/ERASE) | 2.7 | 3.6 | V | 23 | ||
| Flash Timing Generator frequency | fFTG | 257 | 476 | kHz | 23 | ||
| Internal time delay to release POR | t(POR_Delay) | 150 | 250 | μs | 20 | ||
| DCO output frequency tolerance with ROSC | fDCO | -15 | 15 | % | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, VCC = 2.2 V | 22 | |
| Reference voltage V(RefVT), Comparator_A | V(RefVT) | 390 | 480 | 540 | mV | PCA0=1, CARSEL=1, CAREF=3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, VCC = 2.2 V | 18 |
| Reference voltage V(RefVT), Comparator_A | V(RefVT) | 400 | 490 | 550 | mV | PCA0=1, CARSEL=1, CAREF=3, no load at P2.3/CA0/TA1 and P2.4/CA1/TA2, TA = 85°C, VCC = 3 V | 18 |
| Comparator_A supply current (CAON=1, CARSEL=0, CAREF=0) | I(DD) | 25 | 40 | μA | CAON=1, CARSEL=0, CAREF=0, VCC = 2.2 V | 18 | |
| Comparator_A supply current (CAON=1, CARSEL=0, CAREF=0) | I(DD) | 45 | 60 | μA | CAON=1, CARSEL=0, CAREF=0, VCC = 3 V | 18 | |
| Supply voltage, fuse-blow VFB | VFB | 6 | 7 | V | voltage level on TEST for fuse-blow | 23 | |
| DCO output frequency, ROSC (2.2 V) | fDCO | 1.8 | MHz | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, VCC = 2.2 V | 22 | ||
| DCO output frequency, ROSC (3 V) | fDCO | 1.95 | MHz | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, TA = 25°C, VCC = 3 V | 22 |
CAD (KiCad official)
- Symbol:
MSP430F123IDWR - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
msp430f123idwr-etched.step/msp430f123idwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f123idwr.step/msp430f123idwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
739540db5ae64cbb, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).