component
MSP430F1222IDWR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MSP430F1222IDWR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · SOIC-28-300mil
MSP430F1222IDWR from Texas Instruments, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEST | input | Selects test mode for JTAG pins on P1.x. |
| 2 | VCC | power_in | Supply voltage, specified for a low supply range of 1.8 V to 3.6 V. |
| 3 | P2.5/ROSC | bidirectional | General-purpose digital I/O pin; input for external resistor that defines the DCO nominal frequency. |
| 4 | VSS | power_in | Ground reference. |
| 5 | XOUT | output | Output terminal of crystal oscillator. |
| 6 | XIN | input | Input terminal of crystal oscillator. |
| 7 | RST/NMI | input | Reset or nonmaskable interrupt input. |
| 8 | P2.0/ACLK/A0 | bidirectional | General-purpose digital I/O pin; ACLK output and analog input to 10-bit ADC input A0. |
| 9 | P2.1/INCLK/A1 | bidirectional | General-purpose digital I/O pin; Timer_A clock signal at INCLK and analog input to 10-bit ADC input A1. |
| 10 | P2.2/TA0/A2 | bidirectional | General-purpose digital I/O pin; Timer_A CCI0B input or Out0 output, analog input to 10-bit ADC input A2, and BSL receive. |
| 11 | P3.0/STE0/A5 | bidirectional | General-purpose digital I/O pin; slave transmit enable for USART0 SPI mode and analog input to 10-bit ADC input A5. |
| 12 | P3.1/SIMO0 | bidirectional | General-purpose digital I/O pin; slave in/master out of USART0 SPI mode. |
| 13 | P3.2/SOMI0 | bidirectional | General-purpose digital I/O pin; slave out/master in of USART0 SPI mode. |
| 14 | P3.3/UCLK0 | bidirectional | General-purpose digital I/O pin; external clock input for USART0 UART or SPI mode, and clock output in USART0 SPI mode. |
| 15 | P3.4/UTXD0 | bidirectional | General-purpose digital I/O pin; transmit data out of USART0 UART mode. |
| 16 | P3.5/URXD0 | bidirectional | General-purpose digital I/O pin; receive data in of USART0 UART mode. |
| 17 | P3.6/A6 | bidirectional | General-purpose digital I/O pin; analog input to 10-bit ADC input A6. |
| 18 | P3.7/A7 | bidirectional | General-purpose digital I/O pin; analog input to 10-bit ADC input A7. |
| 19 | P2.3/TA1/A3/VREF-/VeREF- | bidirectional | General-purpose digital I/O pin; Timer_A CCI1B input or Out1 output, analog input to 10-bit ADC input A3, and negative reference voltage terminal. |
| 20 | P2.4/TA2/A4/VREF+/VeREF+ | bidirectional | General-purpose digital I/O pin; Timer_A Out2 output, analog input to 10-bit ADC input A4, and I/O of positive reference voltage terminal. |
| 21 | P1.0/TACLK/ADC10CLK | bidirectional | General-purpose digital I/O pin; Timer_A clock signal TACLK input and 10-bit ADC conversion clock. |
| 22 | P1.1/TA0 | bidirectional | General-purpose digital I/O pin; Timer_A CCI0A input or Out0 output, and BSL transmit. |
| 23 | P1.2/TA1 | bidirectional | General-purpose digital I/O pin; Timer_A CCI1A input or Out1 output. |
| 24 | P1.3/TA2 | bidirectional | General-purpose digital I/O pin; Timer_A CCI2A input or Out2 output. |
| 25 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O pin; SMCLK signal output and test clock input for device programming and test. |
| 26 | P1.5/TA0/TMS | bidirectional | General-purpose digital I/O pin; Timer_A Out0 output and test mode select input for device programming and test. |
| 27 | P1.6/TA1/TDI/TCLK | bidirectional | General-purpose digital I/O pin; Timer_A Out1 output and test data input or test clock input. |
| 28 | P1.7/TA2/TDO/TDI | bidirectional | General-purpose digital I/O pin; Timer_A Out2 output and test data output or data input during programming, with TDO or TDI selected via JTAG instruction. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program/erase flash memory | VCC(PGM/ERASE) | 2.7 | 3.6 | V | MSP430F12x2 | 16 | |
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | Row printed for MSP430F11x2; Figure 1 label covers F11x2/12x2 | 16 | |
| Operating free-air temperature range | TA | -40 | 85 | °C | MSP430F12x2 | 16 | |
| Processor frequency f(system) at VCC = 1.8 V | f(system) | 4.15 | MHz | VCC = 1.8 V, MSP430F12x2 | 16 | ||
| Processor frequency f(system) at VCC = 3.6 V | f(system) | 8 | MHz | VCC = 3.6 V, MSP430F12x2 | 16 | ||
| LFXT1 crystal frequency, ceramic resonator, XT1 mode | f(LFXT1) | 450 | 8000 | kHz | XT1 selected mode, XTS=1, ceramic resonator (see Notes 1 and 2) | 16 | |
| LFXT1 crystal frequency, crystal, XT1 mode | f(LFXT1) | 1000 | 8000 | kHz | XT1 selected mode, XTS=1, crystal | 16 | |
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | All voltages referenced to VSS | 16 | |
| Voltage applied to any pin | -0.3 | V | Maximum printed as VCC + 0.3 V | 16 | |||
| Diode current at any device terminal | -2 | 2 | mA | 16 | |||
| Storage temperature, unprogrammed device | Tstg | -55 | 150 | °C | Unprogrammed device | 16 | |
| Storage temperature, programmed device | Tstg | -40 | 85 | °C | Programmed device | 16 | |
| Active mode supply current | I(AM) | 200 | 250 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, program executes in flash, VCC = 2.2 V | 17 | |
| Active mode supply current | I(AM) | 300 | 350 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, program executes in flash, VCC = 3 V | 17 | |
| Active mode supply current | I(AM) | 3 | 5 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=f(ACLK)=4096 Hz, program executes in flash, VCC = 2.2 V | 17 | |
| Active mode supply current | I(AM) | 11 | 18 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=f(ACLK)=4096 Hz, program executes in flash, VCC = 3 V | 17 | |
| Low-power mode LPM0 supply current | I(CPUOff) | 32 | 45 | µA | TA = −40°C to +85°C, f(MCLK)=0, f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, VCC = 2.2 V | 17 | |
| Low-power mode LPM0 supply current | I(CPUOff) | 55 | 70 | µA | TA = −40°C to +85°C, f(MCLK)=0, f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, VCC = 3 V | 17 | |
| Low-power mode LPM2 supply current | I(LPM2) | 11 | 14 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0 = 0, VCC = 2.2 V | 17 | |
| Low-power mode LPM2 supply current | I(LPM2) | 17 | 22 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0 = 0, VCC = 3 V | 17 | |
| Low-power mode LPM3 supply current | I(LPM3) | 0.7 | 1 | µA | TA = 25°C, VCC = 2.2 V | 17 | |
| Low-power mode LPM3 supply current | I(LPM3) | 1.6 | 1.9 | µA | TA = 25°C, VCC = 3 V | 17 | |
| Low-power mode LPM4 supply current | I(LPM4) | 0.1 | 0.5 | µA | TA = 25°C, VCC = 2.2 V/3 V | 17 | |
| Positive-going input threshold voltage | VIT+ | 1.1 | 1.5 | V | Schmitt-trigger inputs, VCC = 2.2 V | 18 | |
| Positive-going input threshold voltage | VIT+ | 1.5 | 1.9 | V | Schmitt-trigger inputs, VCC = 3 V | 18 | |
| Negative-going input threshold voltage | VIT− | 0.4 | 0.9 | V | Schmitt-trigger inputs, VCC = 2.2 V | 18 | |
| Negative-going input threshold voltage | VIT− | 0.9 | 1.3 | V | Schmitt-trigger inputs, VCC = 3 V | 18 | |
| Input voltage hysteresis (VIT+ − VIT−) | Vhys | 0.3 | 1.1 | V | Schmitt-trigger inputs, VCC = 2.2 V | 18 | |
| Input voltage hysteresis (VIT+ − VIT−) | Vhys | 0.5 | 1 | V | Schmitt-trigger inputs, VCC = 3 V | 18 | |
| High-impedance leakage current, Port P1 | Ilkg(Px.x) | -50 | 50 | nA | Port P1: P1.x, 0 ≤ x ≤ 7, VCC 2.2 V/3 V | 18 | |
| High-impedance leakage current, Port P2 | Ilkg(Px.x) | -50 | 50 | nA | Port P2: P2.x, 0 ≤ x ≤ 5, VCC 2.2 V/3 V | 18 | |
| DCO frequency f(DCO77), 2.2 V | f(DCO77) | 4 | 4.5 | 4.9 | MHz | Rsel = 7, DCO = 7, MOD = 0, DCOR = 0, TA = 25°C, VCC = 2.2 V | 23 |
| DCO frequency f(DCO77), 3 V | f(DCO77) | 4.4 | 4.9 | 5.4 | MHz | Rsel = 7, DCO = 7, MOD = 0, DCOR = 0, TA = 25°C, VCC = 3 V | 23 |
| DCO frequency f(DCO03), 2.2 V | f(DCO03) | 0.08 | 0.12 | 0.15 | MHz | Rsel = 0, DCO = 3, MOD = 0, DCOR = 0, TA = 25°C, VCC = 2.2 V | 23 |
| DCO frequency f(DCO03), 3 V | f(DCO03) | 0.08 | 0.13 | 0.16 | MHz | Rsel = 0, DCO = 3, MOD = 0, DCOR = 0, TA = 25°C, VCC = 3 V | 23 |
| DCO output frequency fDCO with ROSC, tolerance | fDCO | -15 | 15 | % | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, VCC = 2.2 V | 24 | |
| DCO output frequency fDCO with ROSC | fDCO | 1.8 | MHz | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, VCC = 2.2 V | 24 | ||
| DCO output frequency fDCO with ROSC | fDCO | 1.95 | MHz | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, TA = 25°C, VCC = 3 V | 24 | ||
| Analog supply voltage | VCC | 2.2 | 3.6 | V | VSS = 0 V | 25 | |
| Operating supply current into VCC, 10-bit ADC | IADC10 | 0.52 | 1.05 | mA | fADC10CLK = 5.0 MHz, ADC10ON = 1, REFON = 0, VCC = 2.2 V | 25 | |
| Operating supply current into VCC, 10-bit ADC | IADC10 | 0.6 | 1.2 | mA | ADC10ON = 1, REFON = 0, ADC10SHT0=1, ADC10SHT1=0, ADC10DIV=0, VCC = 3 V | 25 | |
| Input capacitance | CI | 27 | pF | Only one terminal selected at a time, VCC = 2.2 V | 25 | ||
| Input MUX ON resistance | RI | 2000 | Ω | 0 V ≤ VAx ≤ VCC, VCC = 3 V | 25 | ||
| Positive built-in reference voltage output, 2.5 V | VREF+ | 2.35 | 2.5 | 2.65 | V | REF2_5V = 1, IVREF+ ≤ IVREF+max, VCC = 3 V | 26 |
| Positive built-in reference voltage output, 1.5 V | VREF+ | 1.41 | 1.5 | 1.59 | V | REF2_5V = 0, IVREF+ ≤ IVREF+max, VCC = 2.2 V/3 V | 26 |
| Temperature coefficient of built-in reference | TREF+ | -100 | 100 | ppm/°C | IVREF+ constant in 0 mA ≤ IVREF+ ≤ 1 mA, VCC = 2.2 V/3 V | 26 | |
| ADC10 clock frequency fADC10CLK | fADC10CLK | 0.45 | 6.3 | MHz | For specified performance of ADC10SR = 0 | 27 | |
| ADC10 clock frequency fADC10CLK for linearity parameters | fADC10CLK | 0.45 | 1.5 | MHz | For specified performance of ADC10 linearity parameters, ADC10SR = 1 | 27 | |
| ADC10 internal oscillator frequency fADC10OSC | fADC10OSC | 3.7 | 6.3 | MHz | ADC10DIV=0, fADC10CLK=fADC10OSC, VCC = 2.2 V/3 V | 27 | |
| Operating supply current into REFON = 0, temperature sensor | ISENSOR | 40 | 120 | µA | REFON = 0, INCH = 0Ah, VCC = 2.2 V | 28 | |
| Operating supply current into REFON = 0, temperature sensor | ISENSOR | 60 | 160 | µA | REFON = 0, INCH = 0Ah, ADC10ON=NA, TA = 25°C, VCC = 3 V | 28 | |
| Sensor voltage VSENSOR, tolerance | VSENSOR | -5 | 5 | % | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V, and TA = 0°C at 3 V | 28 | |
| Sensor voltage VSENSOR | VSENSOR | 986 | mV | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V and 3 V | 28 | ||
| Temperature sensor coefficient TCSENSOR, tolerance | TCSENSOR | -3 | 3 | % | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V/3 V | 28 | |
| Temperature sensor coefficient TCSENSOR | TCSENSOR | 3.55 | mV/°C | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V/3 V | 28 | ||
| VCC divider at channel 11, tolerance | VMID | -0.04 | 0.04 | V | ADC10ON = 1, INCH = 0Bh, VCC = 2.2 V | 28 | |
| VCC divider at channel 11 VMID | VMID | 1.1 | V | ADC10ON = 1, INCH = 0Bh, VCC = 2.2 V | 28 | ||
| VCC divider at channel 11 VMID | VMID | 1.5 | V | ADC10ON = 1, INCH = 0Bh, VMID is ~0.5 x VCC, VCC = 3 V | 28 | ||
| Flash Timing Generator frequency | fFTG | 257 | 476 | kHz | Flash | 29 | |
| Supply current from VCC during program | IPGM | 3 | 5 | mA | VCC = 2.7 V/3.6 V | 29 | |
| Supply current from VCC during erase | IERASE | 3 | 7 | mA | VCC = 2.7 V/3.6 V | 29 | |
| TCK input frequency | fTCK | 0 | 5 | MHz | VCC = 2.2 V | 29 | |
| TCK input frequency | fTCK | 0 | 10 | MHz | VCC = 3 V | 29 | |
| Internal pull-down resistance on TEST | RInternal | 25 | 60 | 90 | kΩ | VCC = 2.2 V/3 V | 29 |
| Voltage level on TEST for fuse-blow | VFB | 6 | 7 | V | JTAG fuse | 29 |
CAD (KiCad official)
- Symbol:
MSP430F1222IDWR - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
msp430f1222idwr-etched.step/msp430f1222idwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f1222idwr.step/msp430f1222idwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (60 pp, sha256
1ea45e02acd13d84, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430F1222IDWR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · SOIC-28-300mil
MSP430F1222IDWR from Texas Instruments, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEST | input | Selects test mode for JTAG pins on P1.x. |
| 2 | VCC | power_in | Supply voltage, specified for a low supply range of 1.8 V to 3.6 V. |
| 3 | P2.5/ROSC | bidirectional | General-purpose digital I/O pin; input for external resistor that defines the DCO nominal frequency. |
| 4 | VSS | power_in | Ground reference. |
| 5 | XOUT | output | Output terminal of crystal oscillator. |
| 6 | XIN | input | Input terminal of crystal oscillator. |
| 7 | RST/NMI | input | Reset or nonmaskable interrupt input. |
| 8 | P2.0/ACLK/A0 | bidirectional | General-purpose digital I/O pin; ACLK output and analog input to 10-bit ADC input A0. |
| 9 | P2.1/INCLK/A1 | bidirectional | General-purpose digital I/O pin; Timer_A clock signal at INCLK and analog input to 10-bit ADC input A1. |
| 10 | P2.2/TA0/A2 | bidirectional | General-purpose digital I/O pin; Timer_A CCI0B input or Out0 output, analog input to 10-bit ADC input A2, and BSL receive. |
| 11 | P3.0/STE0/A5 | bidirectional | General-purpose digital I/O pin; slave transmit enable for USART0 SPI mode and analog input to 10-bit ADC input A5. |
| 12 | P3.1/SIMO0 | bidirectional | General-purpose digital I/O pin; slave in/master out of USART0 SPI mode. |
| 13 | P3.2/SOMI0 | bidirectional | General-purpose digital I/O pin; slave out/master in of USART0 SPI mode. |
| 14 | P3.3/UCLK0 | bidirectional | General-purpose digital I/O pin; external clock input for USART0 UART or SPI mode, and clock output in USART0 SPI mode. |
| 15 | P3.4/UTXD0 | bidirectional | General-purpose digital I/O pin; transmit data out of USART0 UART mode. |
| 16 | P3.5/URXD0 | bidirectional | General-purpose digital I/O pin; receive data in of USART0 UART mode. |
| 17 | P3.6/A6 | bidirectional | General-purpose digital I/O pin; analog input to 10-bit ADC input A6. |
| 18 | P3.7/A7 | bidirectional | General-purpose digital I/O pin; analog input to 10-bit ADC input A7. |
| 19 | P2.3/TA1/A3/VREF-/VeREF- | bidirectional | General-purpose digital I/O pin; Timer_A CCI1B input or Out1 output, analog input to 10-bit ADC input A3, and negative reference voltage terminal. |
| 20 | P2.4/TA2/A4/VREF+/VeREF+ | bidirectional | General-purpose digital I/O pin; Timer_A Out2 output, analog input to 10-bit ADC input A4, and I/O of positive reference voltage terminal. |
| 21 | P1.0/TACLK/ADC10CLK | bidirectional | General-purpose digital I/O pin; Timer_A clock signal TACLK input and 10-bit ADC conversion clock. |
| 22 | P1.1/TA0 | bidirectional | General-purpose digital I/O pin; Timer_A CCI0A input or Out0 output, and BSL transmit. |
| 23 | P1.2/TA1 | bidirectional | General-purpose digital I/O pin; Timer_A CCI1A input or Out1 output. |
| 24 | P1.3/TA2 | bidirectional | General-purpose digital I/O pin; Timer_A CCI2A input or Out2 output. |
| 25 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O pin; SMCLK signal output and test clock input for device programming and test. |
| 26 | P1.5/TA0/TMS | bidirectional | General-purpose digital I/O pin; Timer_A Out0 output and test mode select input for device programming and test. |
| 27 | P1.6/TA1/TDI/TCLK | bidirectional | General-purpose digital I/O pin; Timer_A Out1 output and test data input or test clock input. |
| 28 | P1.7/TA2/TDO/TDI | bidirectional | General-purpose digital I/O pin; Timer_A Out2 output and test data output or data input during programming, with TDO or TDI selected via JTAG instruction. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program/erase flash memory | VCC(PGM/ERASE) | 2.7 | | 3.6 | V | MSP430F12x2 | 16 |
| Supply voltage during program execution | VCC | 1.8 | | 3.6 | V | Row printed for MSP430F11x2; Figure 1 label covers F11x2/12x2 | 16 |
| Operating free-air temperature range | TA | -40 | | 85 | °C | MSP430F12x2 | 16 |
| Processor frequency f(system) at VCC = 1.8 V | f(system) | | | 4.15 | MHz | VCC = 1.8 V, MSP430F12x2 | 16 |
| Processor frequency f(system) at VCC = 3.6 V | f(system) | | | 8 | MHz | VCC = 3.6 V, MSP430F12x2 | 16 |
| LFXT1 crystal frequency, ceramic resonator, XT1 mode | f(LFXT1) | 450 | | 8000 | kHz | XT1 selected mode, XTS=1, ceramic resonator (see Notes 1 and 2) | 16 |
| LFXT1 crystal frequency, crystal, XT1 mode | f(LFXT1) | 1000 | | 8000 | kHz | XT1 selected mode, XTS=1, crystal | 16 |
| Voltage applied at VCC to VSS | VCC | -0.3 | | 4.1 | V | All voltages referenced to VSS | 16 |
| Voltage applied to any pin | | -0.3 | | | V | Maximum printed as VCC + 0.3 V | 16 |
| Diode current at any device terminal | | -2 | | 2 | mA | | 16 |
| Storage temperature, unprogrammed device | Tstg | -55 | | 150 | °C | Unprogrammed device | 16 |
| Storage temperature, programmed device | Tstg | -40 | | 85 | °C | Programmed device | 16 |
| Active mode supply current | I(AM) | | 200 | 250 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, program executes in flash, VCC = 2.2 V | 17 |
| Active mode supply current | I(AM) | | 300 | 350 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, program executes in flash, VCC = 3 V | 17 |
| Active mode supply current | I(AM) | | 3 | 5 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=f(ACLK)=4096 Hz, program executes in flash, VCC = 2.2 V | 17 |
| Active mode supply current | I(AM) | | 11 | 18 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=f(ACLK)=4096 Hz, program executes in flash, VCC = 3 V | 17 |
| Low-power mode LPM0 supply current | I(CPUOff) | | 32 | 45 | µA | TA = −40°C to +85°C, f(MCLK)=0, f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, VCC = 2.2 V | 17 |
| Low-power mode LPM0 supply current | I(CPUOff) | | 55 | 70 | µA | TA = −40°C to +85°C, f(MCLK)=0, f(SMCLK)=1 MHz, f(ACLK)=32,768 Hz, VCC = 3 V | 17 |
| Low-power mode LPM2 supply current | I(LPM2) | | 11 | 14 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0 = 0, VCC = 2.2 V | 17 |
| Low-power mode LPM2 supply current | I(LPM2) | | 17 | 22 | µA | TA = −40°C to +85°C, f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32,768 Hz, SCG0 = 0, VCC = 3 V | 17 |
| Low-power mode LPM3 supply current | I(LPM3) | | 0.7 | 1 | µA | TA = 25°C, VCC = 2.2 V | 17 |
| Low-power mode LPM3 supply current | I(LPM3) | | 1.6 | 1.9 | µA | TA = 25°C, VCC = 3 V | 17 |
| Low-power mode LPM4 supply current | I(LPM4) | | 0.1 | 0.5 | µA | TA = 25°C, VCC = 2.2 V/3 V | 17 |
| Positive-going input threshold voltage | VIT+ | | 1.1 | 1.5 | V | Schmitt-trigger inputs, VCC = 2.2 V | 18 |
| Positive-going input threshold voltage | VIT+ | | 1.5 | 1.9 | V | Schmitt-trigger inputs, VCC = 3 V | 18 |
| Negative-going input threshold voltage | VIT− | | 0.4 | 0.9 | V | Schmitt-trigger inputs, VCC = 2.2 V | 18 |
| Negative-going input threshold voltage | VIT− | | 0.9 | 1.3 | V | Schmitt-trigger inputs, VCC = 3 V | 18 |
| Input voltage hysteresis (VIT+ − VIT−) | Vhys | | 0.3 | 1.1 | V | Schmitt-trigger inputs, VCC = 2.2 V | 18 |
| Input voltage hysteresis (VIT+ − VIT−) | Vhys | | 0.5 | 1 | V | Schmitt-trigger inputs, VCC = 3 V | 18 |
| High-impedance leakage current, Port P1 | Ilkg(Px.x) | -50 | | 50 | nA | Port P1: P1.x, 0 ≤ x ≤ 7, VCC 2.2 V/3 V | 18 |
| High-impedance leakage current, Port P2 | Ilkg(Px.x) | -50 | | 50 | nA | Port P2: P2.x, 0 ≤ x ≤ 5, VCC 2.2 V/3 V | 18 |
| DCO frequency f(DCO77), 2.2 V | f(DCO77) | 4 | 4.5 | 4.9 | MHz | Rsel = 7, DCO = 7, MOD = 0, DCOR = 0, TA = 25°C, VCC = 2.2 V | 23 |
| DCO frequency f(DCO77), 3 V | f(DCO77) | 4.4 | 4.9 | 5.4 | MHz | Rsel = 7, DCO = 7, MOD = 0, DCOR = 0, TA = 25°C, VCC = 3 V | 23 |
| DCO frequency f(DCO03), 2.2 V | f(DCO03) | 0.08 | 0.12 | 0.15 | MHz | Rsel = 0, DCO = 3, MOD = 0, DCOR = 0, TA = 25°C, VCC = 2.2 V | 23 |
| DCO frequency f(DCO03), 3 V | f(DCO03) | 0.08 | 0.13 | 0.16 | MHz | Rsel = 0, DCO = 3, MOD = 0, DCOR = 0, TA = 25°C, VCC = 3 V | 23 |
| DCO output frequency fDCO with ROSC, tolerance | fDCO | -15 | | 15 | % | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, VCC = 2.2 V | 24 |
| DCO output frequency fDCO with ROSC | fDCO | | 1.8 | | MHz | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, VCC = 2.2 V | 24 |
| DCO output frequency fDCO with ROSC | fDCO | | 1.95 | | MHz | Rsel = 4, DCO = 3, MOD = 0, DCOR = 1, TA = 25°C, VCC = 3 V | 24 |
| Analog supply voltage | VCC | 2.2 | | 3.6 | V | VSS = 0 V | 25 |
| Operating supply current into VCC, 10-bit ADC | IADC10 | | 0.52 | 1.05 | mA | fADC10CLK = 5.0 MHz, ADC10ON = 1, REFON = 0, VCC = 2.2 V | 25 |
| Operating supply current into VCC, 10-bit ADC | IADC10 | | 0.6 | 1.2 | mA | ADC10ON = 1, REFON = 0, ADC10SHT0=1, ADC10SHT1=0, ADC10DIV=0, VCC = 3 V | 25 |
| Input capacitance | CI | | 27 | | pF | Only one terminal selected at a time, VCC = 2.2 V | 25 |
| Input MUX ON resistance | RI | | 2000 | | Ω | 0 V ≤ VAx ≤ VCC, VCC = 3 V | 25 |
| Positive built-in reference voltage output, 2.5 V | VREF+ | 2.35 | 2.5 | 2.65 | V | REF2_5V = 1, IVREF+ ≤ IVREF+max, VCC = 3 V | 26 |
| Positive built-in reference voltage output, 1.5 V | VREF+ | 1.41 | 1.5 | 1.59 | V | REF2_5V = 0, IVREF+ ≤ IVREF+max, VCC = 2.2 V/3 V | 26 |
| Temperature coefficient of built-in reference | TREF+ | -100 | | 100 | ppm/°C | IVREF+ constant in 0 mA ≤ IVREF+ ≤ 1 mA, VCC = 2.2 V/3 V | 26 |
| ADC10 clock frequency fADC10CLK | fADC10CLK | 0.45 | | 6.3 | MHz | For specified performance of ADC10SR = 0 | 27 |
| ADC10 clock frequency fADC10CLK for linearity parameters | fADC10CLK | 0.45 | | 1.5 | MHz | For specified performance of ADC10 linearity parameters, ADC10SR = 1 | 27 |
| ADC10 internal oscillator frequency fADC10OSC | fADC10OSC | 3.7 | | 6.3 | MHz | ADC10DIV=0, fADC10CLK=fADC10OSC, VCC = 2.2 V/3 V | 27 |
| Operating supply current into REFON = 0, temperature sensor | ISENSOR | | 40 | 120 | µA | REFON = 0, INCH = 0Ah, VCC = 2.2 V | 28 |
| Operating supply current into REFON = 0, temperature sensor | ISENSOR | | 60 | 160 | µA | REFON = 0, INCH = 0Ah, ADC10ON=NA, TA = 25°C, VCC = 3 V | 28 |
| Sensor voltage VSENSOR, tolerance | VSENSOR | -5 | | 5 | % | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V, and TA = 0°C at 3 V | 28 |
| Sensor voltage VSENSOR | VSENSOR | | 986 | | mV | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V and 3 V | 28 |
| Temperature sensor coefficient TCSENSOR, tolerance | TCSENSOR | -3 | | 3 | % | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V/3 V | 28 |
| Temperature sensor coefficient TCSENSOR | TCSENSOR | | 3.55 | | mV/°C | ADC10ON = 1, INCH = 0Ah, VCC = 2.2 V/3 V | 28 |
| VCC divider at channel 11, tolerance | VMID | -0.04 | | 0.04 | V | ADC10ON = 1, INCH = 0Bh, VCC = 2.2 V | 28 |
| VCC divider at channel 11 VMID | VMID | | 1.1 | | V | ADC10ON = 1, INCH = 0Bh, VCC = 2.2 V | 28 |
| VCC divider at channel 11 VMID | VMID | | 1.5 | | V | ADC10ON = 1, INCH = 0Bh, VMID is ~0.5 x VCC, VCC = 3 V | 28 |
| Flash Timing Generator frequency | fFTG | 257 | | 476 | kHz | Flash | 29 |
| Supply current from VCC during program | IPGM | | 3 | 5 | mA | VCC = 2.7 V/3.6 V | 29 |
| Supply current from VCC during erase | IERASE | | 3 | 7 | mA | VCC = 2.7 V/3.6 V | 29 |
| TCK input frequency | fTCK | 0 | | 5 | MHz | VCC = 2.2 V | 29 |
| TCK input frequency | fTCK | 0 | | 10 | MHz | VCC = 3 V | 29 |
| Internal pull-down resistance on TEST | RInternal | 25 | 60 | 90 | kΩ | VCC = 2.2 V/3 V | 29 |
| Voltage level on TEST for fuse-blow | VFB | 6 | | 7 | V | JTAG fuse | 29 |
## CAD (KiCad official)
- Symbol: `MSP430F1222IDWR`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `msp430f1222idwr-etched.step` / `msp430f1222idwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430f1222idwr.step` / `msp430f1222idwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430f1222.pdf) (60 pp, sha256 `1ea45e02acd13d84`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430f1222idwr-datasheet.pdf)