main
Ray Publish 0.1.0 010bce7

MSP430AFE253IPW

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-24

MSP430AFE253IPW from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0.0+ input SD24_A positive analog input A0.0, which forms a differential pair with A0.0-; the absolute input voltage range is AVSS - 1 V to AVCC.
2 A0.0- input SD24_A negative analog input A0.0, the differential partner of A0.0+; the absolute input voltage range is AVSS - 1 V to AVCC.
3 A1.0+ input SD24_A positive analog input A1.0, which forms a differential pair with A1.0-; the absolute input voltage range is AVSS - 1 V to AVCC.
4 A1.0- input SD24_A negative analog input A1.0, the differential partner of A1.0+; the absolute input voltage range is AVSS - 1 V to AVCC.
5 AVCC power_in Analog supply voltage, positive terminal, which must not power up before DVCC and must be 2.5 V to 3.6 V for SD24_A operation.
6 AVSS power_in Analog supply voltage, negative terminal (analog ground, AVSS = DVSS = VSS = 0 V).
7 VREF power_in Input for an external reference voltage (1.0 V to 1.5 V with SD24REFON = 0) or output of the internal reference (about 1.2 V), which can also be used as mid-voltage.
8 A2.0+ input SD24_A positive analog input A2.0, which is present on the MSP430AFE2x3 (three-converter) devices and not on AFE2x2 or AFE2x1.
9 A2.0- input SD24_A negative analog input A2.0, the differential partner of A2.0+, present on the MSP430AFE2x3 devices only.
10 TEST/SBWTCK input Selects test mode for the JTAG pins P1.5 to P1.7 and P2.0 and serves as the Spy-Bi-Wire test clock input; the device protection fuse is connected to this pin.
11 RST/NMI/SBWTDIO input Reset or nonmaskable interrupt input (a pulse of at least 2 µs at 3 V is accepted as reset) and Spy-Bi-Wire test data input/output.
12 P1.0/SVSIN/TACLK/SMCLK/TA2 bidirectional General-purpose digital I/O with Schmitt-trigger input, also the analog input to the supply voltage supervisor, Timer_A3 TACLK input, SMCLK output, and Timer_A3 Out2 output.
13 DVSS power_in Digital supply voltage, negative terminal (ground).
14 P2.6/XT2IN bidirectional Input terminal of the crystal oscillator XT2, which can also be used as a general-purpose digital I/O pin.
15 P2.7/XT2OUT bidirectional Output terminal of the crystal oscillator XT2, which can also be used as a general-purpose digital I/O pin.
16 DVCC power_in Digital supply voltage, positive terminal; VCC is 1.8 V to 3.6 V during program execution and 2.2 V to 3.6 V during flash program or erase.
17 P1.1/TA1/SDCLK bidirectional General-purpose digital I/O pin, also Timer_A3 capture inputs CCI1A and CCI1B, Timer_A3 Out1 output, and SD24_A bit-stream clock output.
18 P1.2/TA0/SD0DO bidirectional General-purpose digital I/O pin, also Timer_A3 capture inputs CCI0A and CCI0B, Timer_A3 Out0 output, and SD24_A bit-stream data output for channel 0.
19 P1.3/UTXD0/SD1DO bidirectional General-purpose digital I/O pin, also USART0 UART transmit data output and SD24_A bit-stream data output for channel 1.
20 P1.4/URXD0/SD2DO bidirectional General-purpose digital I/O pin, also USART0 UART receive data input and SD24_A bit-stream data output for channel 2, which is available on the MSP430AFE2x3 devices.
21 P1.5/SIMO0/SVSOUT/TMS bidirectional General-purpose digital I/O pin, also USART0 SPI slave-in/master-out, SVS comparator output, and JTAG test mode select (TMS) input for device programming and test.
22 P1.6/SOMI0/TA2/TCK bidirectional General-purpose digital I/O pin, also USART0 SPI slave-out/master-in, Timer_A3 Out2 output, and JTAG test clock (TCK) input for device programming and test.
23 P1.7/UCLK0/TA1/TDO/TDI bidirectional General-purpose digital I/O pin, also USART0 external clock input (UART/SPI) or clock output (SPI), Timer_A3 Out1 output, and JTAG TDO/TDI data output or programming data input.
24 P2.0/STE0/TA0/TDI/TCLK bidirectional General-purpose digital I/O pin, also USART0 SPI slave transmit enable, Timer_A3 Out0 output, and JTAG TDI or TCLK input for device programming and test.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-24
Category Embedded Processors & Controllers
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS -0.3 4.1 V 9
Voltage applied to any pin -0.3 V 9
Diode current at any device terminal -2 2 mA 9
Storage temperature, unprogrammed device Tstg -55 150 °C Unprogrammed device 9
Storage temperature, programmed device Tstg -40 85 °C Programmed device 9
Electrostatic discharge, human-body model (HBM) V(ESD) -1000 1000 V Per ANSI/ESDA/JEDEC JS-001 9
Supply voltage during program execution VCC 1.8 3.6 V AVCC = DVCC = VCC; during program execution 9
Supply voltage during program or erase of flash memory VCC 2.2 3.6 V During program or erase of flash memory 9
Operating free-air temperature TA -40 85 °C 9
Processor frequency (maximum MCLK frequency) fSYSTEM 4.15 MHz VCC = 1.8 V, Duty cycle = 50% ±10% 9
Processor frequency (maximum MCLK frequency) fSYSTEM 9 MHz VCC = 2.7 V, Duty cycle = 50% ±10% 9
Processor frequency (maximum MCLK frequency) fSYSTEM 12 MHz VCC ≥ 3.3 V, Duty cycle = 50% ±10% 9
Active mode supply current at 12 MHz IAM, 12MHz 4 4.5 mA VCC = 3.3 V; fDCO = fMCLK = fSMCLK = 12 MHz, fACLK = fVLO = 12 kHz, program executes in flash, CPUOFF = 0, SCG0 = 0, SCG1 = 0, OSCOFF = 0 11
Low-power mode 3 (LPM3) current ILPM3,VLO 0.5 1 µA TA = 25°C, VCC = 2.2 V; fDCO = fMCLK = fSMCLK = 0 MHz, fACLK = fVLO = 12 kHz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 12
Low-power mode 4 (LPM4) current ILPM4 0.1 0.7 µA TA = 25°C, VCC = 2.2 V; fDCO = fMCLK = fSMCLK = 0 MHz, fACLK = fVLO = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 12
Low-power mode 4 (LPM4) current ILPM4 1.1 2.5 µA TA = 85°C, VCC = 2.2 V 12
Positive-going input threshold voltage VIT+ 1.35 2.25 V VCC = 3 V 13
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V 13
Input voltage hysteresis (VIT+, VIT-) Vhys 0.3 1 V VCC = 3 V 13
Pullup or pulldown resistor (not RST/NMI pin) RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC; VCC = 3 V 13
High-impedance leakage current (Ports Px) Ilkg(Px.y) -50 50 nA VCC = 3 V; see notes (1), (2) 13
SVS threshold, external voltage on SVSIN V(SVS_IT-) 1.1 1.2 1.3 V VLD = 15; external voltage applied on SVSIN; VCC/dt ≤ 3 V/s 17
SVS start voltage V(SVSstart) 1.55 1.7 V VLD ≠ 0, VCC/dt ≤ 3 V/s 17
SVS supply current ICC(SVS) 12 17 µA VLD ≠ 0, VCC = 3 V 17
DCO supply voltage range (RSELx < 14) VCC 1.8 3.6 V RSELx < 14 19
DCO supply voltage range (RSELx = 15) VCC 3 3.6 V RSELx = 15 19
DCO frequency (14, 3) fDCO(14,3) 8.6 11.25 13.9 MHz 3.3 V; RSELx = 14, DCOx = 3, MODx = 0 19
8-MHz calibrated DCO tolerance overall 7.52 8 8.48 MHz -40°C to 85°C, 2.7 V to 3.6 V; calibrated at 30°C and 3.3 V; BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ 20
12-MHz calibrated DCO tolerance overall 11.28 12 12.72 MHz -40°C to 85°C, 3.3 V to 3.6 V; calibrated at 30°C and 3.3 V; BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ 20
VLO frequency fVLO 4 12 22 kHz -40°C to 85°C; 3 V 21
Oscillator fault frequency fFault,HF 30 300 kHz XT2OFF = 0, XT2Sx = 3; 3 V 21
Analog supply voltage AVCC 2.5 3.6 V AVCC = DVCC; AVSS = DVSS = 0 V 23
Analog supply current, 1 active SD24_A channel including internal reference ISD24 800 1100 µA SD24LP = 0, fSD24 = 1 MHz, SD24OSR = 256, GAIN: 1, 2; 3 V 23
Analog front-end input clock frequency (low-power mode disabled) fSD24 0.03 1 1.1 MHz SD24LP = 0 (low-power mode disabled); 3 V 23
Differential input voltage range for specified performance VID -500 500 mV SD24REFON = 1, SD24GAINx = 1 23
Offset error EOS -0.2 0.2 %FSR SD24GAINx = 1; 3 V 24
Common-mode rejection ratio CMRR 90 dB SD24GAINx = 1; common-mode input signal VID = 500 mV, fIN = 50 Hz or 100 Hz; 3 V 24
Sensor temperature coefficient TCSensor 1.18 1.32 1.46 mV/°C 24
Internal reference voltage VREF 1.14 1.2 1.26 V SD24REFON = 1, SD24VMIDON = 0; 3 V 24
Reference supply current IREF 200 320 µA SD24REFON = 1, SD24VMIDON = 0; 3 V 24
Reference temperature coefficient TC 18 50 ppm/°C SD24REFON = 1, SD24VMIDON = 0 24
VREF(I) maximum load current ILOAD -200 200 nA SD24REFON = 1, SD24VMIDON = 0; 3 V 24
Reference supply + reference output buffer quiescent current IREF,BUF 430 650 µA SD24REFON = 1, SD24VMIDON = 1; 3 V 25
External reference input voltage range VREF(I) 1 1.25 1.5 V SD24REFON = 0; 3 V 25
RAM retention supply voltage V(RAMh) 1.6 V CPU halted 26
Flash timing generator frequency fFTG 257 476 kHz 26
Active mode supply current at 1 MHz IAM, 1MHz 220 µA VCC = 2.2 V; fDCO = fMCLK = fSMCLK = DCO default (approximately 1 MHz), fACLK = fVLO = 12 kHz, program executes in flash, CPUOFF = 0, SCG0 = 0, SCG1 = 0, OSCOFF = 0 11
Low-power mode 0 (LPM0) current ILPM0 65 µA TA = 25°C, VCC = 2.2 V; fMCLK = 0 MHz, fSMCLK = fDCO = DCO default (approximately 1 MHz), fACLK = fVLO = 12 kHz, CPUOFF = 1, SCG0 = 0, SCG1 = 0, OSCOFF = 0 12
Low-power mode 2 (LPM2) current ILPM2 22 µA TA = 25°C, VCC = 2.2 V; fMCLK = fSMCLK = 0 MHz, fDCO = DCO default (approximately 1 MHz), fACLK = fVLO = 12 kHz, CPUOFF = 1, SCG0 = 0, SCG1 = 1, OSCOFF = 0 12
Input capacitance CI 5 pF VIN = VSS or VCC 13
Port output frequency (with load) fPx.y 12 MHz Px.y, CL = 20 pF, RL = 1 kΩ; 3 V 13
Clock output frequency fPort_CLK 16 MHz Px.y, CL = 20 pF; 3 V 13
Brownout reset threshold, falling V(B_IT-) 1.42 V dVCC/dt ≤ 3 V/s 15
Brownout hysteresis Vhys(B_IT-) 120 mV dVCC/dt ≤ 3 V/s 15
Supply voltage at VSS VSS 0 V AVSS = DVSS = VSS 9
Junction-to-ambient thermal resistance, still air RθJA 76.4 °C/W JEDEC 2S2P board 10
Junction-to-case (top) thermal resistance RθJC(TOP) 21.1 °C/W JEDEC 1S0P board 10
Junction-to-case (bottom) thermal resistance RθJC(BOT) 31.7 °C/W 10
Junction-to-board thermal resistance RθJB 31.1 °C/W 10

CAD (KiCad official)

  • Symbol: MSP430AFE253IPW
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: msp430afe253ipw-etched.step / msp430afe253ipw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430afe253ipw.step / msp430afe253ipw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (64 pp, sha256 89d485b125368eaa, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF