← Commit history

Initial commit: component/ms8413

Ray ·31c1212864 ·
2 files changed +326
README.mdadded+65
@@ -0,0 +1,65 @@+# MS8413++**Hangzhou Ruimeng Tech** · Audio Interface ICs · SSOP-28++MS8413 from Hangzhou Ruimeng Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AUDIO/SFSEL1 | tri_state | Output during operation: low level indicates SPDIF signal is valid PCM; during reset used to set internal data format by pulling down to GND through 47K resistor. |+| 2 | 96KHz | output | Sample rate detection output: outputs "0" for sample rates ≤48kHz, outputs "1" for sample rates ≥88.1kHz; during reset external pull-up/down configures digital de-emphasis function. |+| 3 | SFSEL2 | input | Set internal data format by pulling up to VDD through 47K resistor. |+| 4 | FsSEL | input | Set internal MCLK frequency to 256Fs by pulling up to VDD through 47K resistor. |+| 5 | SFSEL0 | input | Set internal data format by pulling up to VDD through 47K resistor. |+| 6 | TX0 | output | Output during operation: fixed output of RXP0; during reset used to set internal PLL by pulling down to GND through 47K resistor. |+| 7 | VDD | power_in | Digital power supply. |+| 8 | MCLKOUT | output | S/PDIF PLL recovered master clock output port; must be connected to PIN10. |+| 9 | SDOUT | output | Serial audio data output monitoring port during operation; during reset must be pulled down to GND through 47K resistor. |+| 10 | MCLKIN | input | Internal DAC master clock input port; must be connected to PIN8. |+| 11 | QV | output | Internal static voltage filter interface output; external capacitor connection required. |+| 12 | AGND | power_in | Analog ground. |+| 13 | AOUTL | output | Analog output left channel port. |+| 14 | AFILT+ | output | Positive reference voltage for internal DAC; external capacitor connection required. |+| 15 | VAA | power_in | Analog power supply. |+| 16 | AOUTR | output | Analog output right channel port. |+| 17 | RXP3 | input | S/PDIF positive input 3 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]. |+| 18 | RXP2 | input | S/PDIF positive input 2 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]. |+| 19 | RXP1 | input | S/PDIF positive input 1 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]. |+| 20 | RXP0 | input | S/PDIF positive input 0 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]. |+| 21 | RXN | input | S/PDIF negative input for differential reception of S/PDIF encoded data; in single-ended signal mode must be AC coupled to ground through capacitor. |+| 22 | VPLL | power_in | Internal PLL power supply +3.3V; requires low noise power to ensure PLL stability. |+| 23 | GND | power_in | Internal PLL power ground. |+| 24 | PFILT | output | PLL loop filter output port; must be connected to RC network to PIN23. |+| 25 | RST | input | Reset input: when low MS8413 enters low power mode and all internal states reset; must remain low at power-up until supply voltage and all input clocks are stable in frequency and phase. |+| 26 | RXSEL1 | input | S/PDIF receiver multiplexer selection input to select one of RXP[3:0] as receiver input. |+| 27 | RXSEL0 | input | S/PDIF receiver multiplexer selection input to select one of RXP[3:0] as receiver input. |+| 28 | ERROR | output | Receiver error output: outputs "1" when received S/PDIF data is unstable or no S/PDIF signal input; must be pulled up to VDD through 47K resistor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Hangzhou Ruimeng Tech |+| Package | SSOP-28 |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `MS8413`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28 (KiCad packages3D, STEP)+- 3D model files: `ms8413-etched.step` / `ms8413-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms8413.step` / `ms8413.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904788709163008) (21 pp, sha256 `ca6454cd23f4ce33`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ms8413-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "ms8413",+  "version": "0.1.0",+  "type": "component",+  "description": "Hangzhou Ruimeng Tech Audio Interface ICs, SSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "ms8413",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ms8413.kicad_sym",+    "ms8413.kicad_mod",+    "ms8413.glb",+    "ms8413.step",+    "ms8413.lbr",+    "docs/hero.png",+    "docs/ms8413-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MS8413",+    "manufacturer": "Hangzhou Ruimeng Tech",+    "package": "SSOP-28",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "Audio Interface ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904788709163008",+    "parts": {+      "symbol": "ms8413.kicad_sym",+      "footprint": "ms8413.kicad_mod",+      "model_3d": "ms8413-etched.glb",+      "model_3d_plain": "ms8413.glb",+      "model_3d_step": "ms8413-etched.step",+      "model_3d_step_plain": "ms8413.step",+      "lbr": "ms8413.lbr"+    },+    "distributor_links": {+      "lcsc": "C2834854"+    },+    "pins": [+      {+        "number": "1",+        "name": "AUDIO/SFSEL1",+        "type": "tri_state",+        "description": "Output during operation: low level indicates SPDIF signal is valid PCM; during reset used to set internal data format by pulling down to GND through 47K resistor."+      },+      {+        "number": "2",+        "name": "96KHz",+        "type": "output",+        "description": "Sample rate detection output: outputs \"0\" for sample rates ≤48kHz, outputs \"1\" for sample rates ≥88.1kHz; during reset external pull-up/down configures digital de-emphasis function."+      },+      {+        "number": "3",+        "name": "SFSEL2",+        "type": "input",+        "description": "Set internal data format by pulling up to VDD through 47K resistor."+      },+      {+        "number": "4",+        "name": "FsSEL",+        "type": "input",+        "description": "Set internal MCLK frequency to 256Fs by pulling up to VDD through 47K resistor."+      },+      {+        "number": "5",+        "name": "SFSEL0",+        "type": "input",+        "description": "Set internal data format by pulling up to VDD through 47K resistor."+      },+      {+        "number": "6",+        "name": "TX0",+        "type": "output",+        "description": "Output during operation: fixed output of RXP0; during reset used to set internal PLL by pulling down to GND through 47K resistor."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply."+      },+      {+        "number": "8",+        "name": "MCLKOUT",+        "type": "output",+        "description": "S/PDIF PLL recovered master clock output port; must be connected to PIN10."+      },+      {+        "number": "9",+        "name": "SDOUT",+        "type": "output",+        "description": "Serial audio data output monitoring port during operation; during reset must be pulled down to GND through 47K resistor."+      },+      {+        "number": "10",+        "name": "MCLKIN",+        "type": "input",+        "description": "Internal DAC master clock input port; must be connected to PIN8."+      },+      {+        "number": "11",+        "name": "QV",+        "type": "output",+        "description": "Internal static voltage filter interface output; external capacitor connection required."+      },+      {+        "number": "12",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "13",+        "name": "AOUTL",+        "type": "output",+        "description": "Analog output left channel port."+      },+      {+        "number": "14",+        "name": "AFILT+",+        "type": "output",+        "description": "Positive reference voltage for internal DAC; external capacitor connection required."+      },+      {+        "number": "15",+        "name": "VAA",+        "type": "power_in",+        "description": "Analog power supply."+      },+      {+        "number": "16",+        "name": "AOUTR",+        "type": "output",+        "description": "Analog output right channel port."+      },+      {+        "number": "17",+        "name": "RXP3",+        "type": "input",+        "description": "S/PDIF positive input 3 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]."+      },+      {+        "number": "18",+        "name": "RXP2",+        "type": "input",+        "description": "S/PDIF positive input 2 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]."+      },+      {+        "number": "19",+        "name": "RXP1",+        "type": "input",+        "description": "S/PDIF positive input 1 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]."+      },+      {+        "number": "20",+        "name": "RXP0",+        "type": "input",+        "description": "S/PDIF positive input 0 for single-ended or differential reception of S/PDIF encoded data; part of 4:1 input multiplexer selectable via RXSEL[1:0]."+      },+      {+        "number": "21",+        "name": "RXN",+        "type": "input",+        "description": "S/PDIF negative input for differential reception of S/PDIF encoded data; in single-ended signal mode must be AC coupled to ground through capacitor."+      },+      {+        "number": "22",+        "name": "VPLL",+        "type": "power_in",+        "description": "Internal PLL power supply +3.3V; requires low noise power to ensure PLL stability."+      },+      {+        "number": "23",+        "name": "GND",+        "type": "power_in",+        "description": "Internal PLL power ground."+      },+      {+        "number": "24",+        "name": "PFILT",+        "type": "output",+        "description": "PLL loop filter output port; must be connected to RC network to PIN23."+      },+      {+        "number": "25",+        "name": "RST",+        "type": "input",+        "description": "Reset input: when low MS8413 enters low power mode and all internal states reset; must remain low at power-up until supply voltage and all input clocks are stable in frequency and phase."+      },+      {+        "number": "26",+        "name": "RXSEL1",+        "type": "input",+        "description": "S/PDIF receiver multiplexer selection input to select one of RXP[3:0] as receiver input."+      },+      {+        "number": "27",+        "name": "RXSEL0",+        "type": "input",+        "description": "S/PDIF receiver multiplexer selection input to select one of RXP[3:0] as receiver input."+      },+      {+        "number": "28",+        "name": "ERROR",+        "type": "output",+        "description": "Receiver error output: outputs \"1\" when received S/PDIF data is unstable or no S/PDIF signal input; must be pulled up to VDD through 47K resistor."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 21,+        "cost_usd": 0.394,+        "at": "2026-09-21T19:00:50"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904788709163008",+        "pages": 21,+        "sha256": "ca6454cd23f4ce33",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file