Generated by kicad-footprint-generator · KiCad file format 20260206
MS8006
Macrosilicon · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
MS8006 from Macrosilicon, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD4 | bidirectional | General-purpose I/O port PD4; alternate functions include TIM1_CH1, PCA_CH0, RTC_1HZ, UART0_TXD, BEEP, TIM2_CH1 and analog VCIN2. |
| 2 | PD5/TX0 | bidirectional | General-purpose I/O port PD5 or UART0 TX; alternate functions include TIM1_CH1N, SPI_MISO, I2C_SCL, UART1_TXD and analog AIN5. |
| 3 | PD6/RX0 | bidirectional | General-purpose I/O port PD6 or UART0 RX; alternate functions include TIM1_CH2, SPI_MOSI, I2C_SDA, UART1_RXD and analog AIN6. |
| 4 | NRST | input | Reset pin, active low, with internal pull-up resistor; low pulses under about 10 us typical are filtered, so hold low longer than 10 us. |
| 5 | PA1/OSCIN | bidirectional | General-purpose I/O port PA1 or crystal oscillator input (OSC_IN) for the external high-speed crystal (4-24 MHz). |
| 6 | PA2/OSCOUT | bidirectional | General-purpose I/O port PA2 or crystal oscillator output (OSC_OUT) for the external high-speed crystal. |
| 7 | VSS | power_in | Ground. |
| 8 | VCAP | passive | In ICP mode 6.5 V is applied externally, in IAP mode it outputs 6.5 V; recommended capacitor 1.0 uF (0.47-2.2 uF); also ADC channel AIN7. |
| 9 | VDD | power_in | Power supply, 2.5 to 5.5 V (table 35.1 states 2.5~5.5 V). |
| 10 | PA3 | bidirectional | General-purpose I/O port PA3; alternate functions include TIM1_CH3N, PCA_CH2, SPI_NSS, LPUART_RXD and VC0_OUT. |
| 11 | PB5 | bidirectional | General-purpose I/O port PB5; also X32K_IN for the 32.768 kHz crystal, with TIM1_BKIN, SPI_CLK, I2C_SDA and UART0_RXD alternates. |
| 12 | PB4 | bidirectional | General-purpose I/O port PB4; also X32K_OUT for the 32.768 kHz crystal, with LPTIM_GATE, SPI_NSS, I2C_SCL and UART0_TXD alternates. |
| 13 | PC3 | bidirectional | General-purpose I/O port PC3; alternate functions include TIM1_CH3, I2C_SDA, UART1_TXD, 1-WIRE and analog AIN1. |
| 14 | PC4 | bidirectional | General-purpose I/O port PC4; alternate functions include TIM1_CH4, I2C_SCL, UART1_RXD, CLK_MCO and analog AIN2. |
| 15 | PC5 | bidirectional | General-purpose I/O port PC5; alternate functions include TIM1_BKIN, SPI_CLK, LPUART_TXD, LVD_OUT and analog VCIN1. |
| 16 | PC6 | bidirectional | General-purpose I/O port PC6; alternate functions include TIM1_CH1, SPI_MOSI, LPUART_RXD, CLK_MCO and analog AIN0. |
| 17 | PC7/SWDIO | bidirectional | General-purpose I/O port PC7 or SWD data I/O (SWDIO); placed in pull-up mode after reset. |
| 18 | PD1/SWDCLK | bidirectional | General-purpose I/O port PD1 or SWD clock (SWDCLK); placed in pull-down mode after reset. |
| 19 | PD2 | bidirectional | General-purpose I/O port PD2; alternate functions include TIM1_CH2, SPI_MISO, LPUART_TXD, 1-WIRE and analog AIN3/VCIN0. |
| 20 | PD3 | bidirectional | General-purpose I/O port PD3; alternate functions include TIM1_CH3N, SPI_MOSI, HXT_OUT, UART0_RXD and analog AIN4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Macrosilicon |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (Vpower) | Vpower | 0 | 5.5 | V | 503 | ||
| Operating voltage | Vop | 2.5 | 3.3 | 5.5 | V | 503 | |
| Storage temperature | Tstg | -40 | 25 | 150 | °C | 503 | |
| Operating temperature | Top | -40 | 25 | 85 | °C | 503 | |
| CPU operating frequency | Fcpu | 32.768 | 4 | 24 | Hz | Printed as 32.768K / 4M / 24M Hz | 503 |
| Supply voltage | VDD | 2.5 | 5.5 | V | 503 | ||
| VCAP capacitance | Cs | 0.47 | 2.2 | μF | Recommended 1.0μF | 503 | |
| Operating temperature (recommended) | Ta | -40 | 85 | °C | 503 | ||
| Run in RAM current, 4M | IDD | 172 | 189 | μA | All peripherals clock OFF, while(1) in RAM, Vcore=1.2V, VDD=3.3V, HIRC 4M | 504 | |
| Run in RAM current, 8M | IDD | 270 | 297 | μA | All peripherals clock OFF, while(1) in RAM, Vcore=1.2V, VDD=3.3V, HIRC 8M | 504 | |
| Run in RAM current, 16M | IDD | 475 | 523 | μA | All peripherals clock OFF, while(1) in RAM, Vcore=1.2V, VDD=3.3V, HIRC 16M | 504 | |
| Run in RAM current, 24M | IDD | 741 | 815 | μA | All peripherals clock OFF, while(1) in RAM, Vcore=1.2V, VDD=3.3V, HIRC 24M | 504 | |
| Run mode current, peripherals ON, 4M | IDD | 394.8 | 453.4 | μA | All peripherals clock ON, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 4M | 504 | |
| Run mode current, peripherals ON, 8M | IDD | 720.9 | 823.4 | μA | All peripherals clock ON, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 8M | 504 | |
| Run mode current, peripherals ON, 16M | IDD | 1402.8 | 1602.7 | μA | All peripherals clock ON, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 16M | 504 | |
| Run mode current, peripherals ON, 24M | IDD | 2168 | 2505 | μA | All peripherals clock ON, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 24M | 504 | |
| Run mode current, peripherals OFF, 4M | IDD | 223 | 384.5 | μA | All peripherals clock OFF, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 4M | 504 | |
| Run mode current, peripherals OFF, 8M | IDD | 390.2 | 681.9 | μA | All peripherals clock OFF, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 8M | 504 | |
| Run mode current, peripherals OFF, 16M | IDD | 1106.8 | 1317.8 | μA | All peripherals clock OFF, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 16M | 504 | |
| Run mode current, peripherals OFF, 24M | IDD | 1694.5 | 2056.7 | μA | All peripherals clock OFF, while(1) in Flash, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 24M | 504 | |
| Run mode current, LXT, peripherals ON, Ta=-40to25°C | IDD | 28 | 40 | μA | All peripherals clock ON, while(1) in Flash, VDD=2.5V-5.5V, LXT 32.768KHz (Driver=1), Ta=-40to25°C | 504 | |
| Run mode current, LXT, peripherals ON, Ta=85°C | IDD | 34 | 46 | μA | All peripherals clock ON, while(1) in Flash, VDD=2.5V-5.5V, LXT 32.768KHz (Driver=1), Ta=85°C | 504 | |
| Sleep current, peripherals ON, 4M | IDD | 157.65 | 184.53 | μA | All peripherals clock ON, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 4M | 504 | |
| Sleep current, peripherals ON, 24M | IDD | 659 | 753 | μA | All peripherals clock ON, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 24M | 505 | |
| Sleep current, peripherals OFF, 4M | IDD | 95 | 116 | μA | All peripherals clock OFF, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 4M | 505 | |
| Sleep current, peripherals OFF, 24M | IDD | 266 | 317 | μA | All peripherals clock OFF, Vcore=1.2V, VDD=2.5V-5.5V, HIRC 24M | 505 | |
| Deep sleep current, all off, Ta=-40to25°C | IDD | 0.95 | 1.04 | μA | All Peripherals clock OFF, Vcore=1.2V, VDD=2.5V-5.5V, Ta=-40to25°C | 505 | |
| Deep sleep current, all off, Ta=85°C | IDD | 3.4 | 3.74 | μA | All Peripherals clock OFF, Vcore=1.2V, VDD=2.5V-5.5V, Ta=85°C | 505 | |
| Deep sleep current, except RTC/IWDG/LPTIM/AWK, Ta=85°C | IDD | 3.98 | 4.38 | μA | All Peripherals clock OFF, Except RTC,IWDG,LPTIM,AWK, Vcore=1.2V, VDD=2.5V-5.5V, Ta=85°C | 505 |
CAD (KiCad official)
- Symbol:
MS8006 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
ms8006-etched.step/ms8006-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms8006.step/ms8006.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Macrosilicon datasheet (515 pp, sha256
381ea05ae867ccec, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).