main
Ray
ms7332m: laser-etched CAD + chip hero (factory 2.0.0 backfill)
0b8828f
MS7332M
Hangzhou Ruimeng Tech · Operational Amplifier · MSOP-8
MS7332M from Hangzhou Ruimeng Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ain | input | Positive input of the reverse-control decoder comparator. Receives the analog signal from which the up-the-coax (reverse) control data is sliced/decoded against the internal Vref. |
| 2 | NC | unconnected | No connect. Leave floating or tie to ground per PCB practice; no internal function. |
| 3 | Vout | output | Video amplifier output. 6dB gain, rail-to-rail driver capable of driving dual 75Ω video loads (or a single 150Ω load); AC- or DC-coupled to the load. |
| 4 | VCC | power_in | Positive supply input, 2.7V-5V single supply. Typical operating current 25mA (13mA quiescent). Bypass with 0.1µF and 22µF capacitors placed as close as possible to this pin. |
| 5 | Vin | input | Video signal input to the amplifier/filter chain. Accepts DAC output either DC-coupled or AC-coupled; internal diode clamp and bias circuit support AC-coupled sync-tip clamping. |
| 6 | GND | power_in | Ground / negative supply reference. Connect to a large ground plane for best video performance. |
| 7 | Dout | output | Reverse-control decoded digital output. Drives high to (VDD-0.1V) and low to 100mV at I=2mA; propagation delay ≤40ns with RL=5.1kΩ, CL=50pF. |
| 8 | Vref | output | Internal reference voltage output for the reverse-control decoder comparator. Bypass to GND with a 0.1µF capacitor to stabilize the reference and reject external interference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MS7332M
CAD (KiCad official)
- Symbol:
MS7332M - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ms7332m-etched.step/ms7332m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms7332m.step/ms7332m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hangzhou Ruimeng Tech datasheet (7 pp, sha256
cb1e33624dfe0ce0, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MS7332M
**Hangzhou Ruimeng Tech** · Operational Amplifier · MSOP-8
MS7332M from Hangzhou Ruimeng Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ain | input | Positive input of the reverse-control decoder comparator. Receives the analog signal from which the up-the-coax (reverse) control data is sliced/decoded against the internal Vref. |
| 2 | NC | unconnected | No connect. Leave floating or tie to ground per PCB practice; no internal function. |
| 3 | Vout | output | Video amplifier output. 6dB gain, rail-to-rail driver capable of driving dual 75Ω video loads (or a single 150Ω load); AC- or DC-coupled to the load. |
| 4 | VCC | power_in | Positive supply input, 2.7V-5V single supply. Typical operating current 25mA (13mA quiescent). Bypass with 0.1µF and 22µF capacitors placed as close as possible to this pin. |
| 5 | Vin | input | Video signal input to the amplifier/filter chain. Accepts DAC output either DC-coupled or AC-coupled; internal diode clamp and bias circuit support AC-coupled sync-tip clamping. |
| 6 | GND | power_in | Ground / negative supply reference. Connect to a large ground plane for best video performance. |
| 7 | Dout | output | Reverse-control decoded digital output. Drives high to (VDD-0.1V) and low to 100mV at I=2mA; propagation delay ≤40ns with RL=5.1kΩ, CL=50pF. |
| 8 | Vref | output | Internal reference voltage output for the reverse-control decoder comparator. Bypass to GND with a 0.1µF capacitor to stabilize the reference and reject external interference. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `MS7332M`
## CAD (KiCad official)
- Symbol: `MS7332M`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ms7332m-etched.step` / `ms7332m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms7332m.step` / `ms7332m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](docs/ms7332m-datasheet.pdf) (7 pp, sha256 `cb1e33624dfe0ce0`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ms7332m-datasheet.pdf)