Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MS726

Hangzhou Ruimeng Tech · Buffers, Drivers, Receivers, Transceivers · SOP-8-EP

MS726 from Hangzhou Ruimeng Tech, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BUSL2 passive M-Bus input terminal 2 with no polarity requirement, where the bus voltage
2 STC power_out 5.5 V regulator output (4.5 to 6.5 V) that needs an external capacitor of at least 10 µF (100 µF recommended), with drive current set by the resistor on RIDD and a limit of 30 mA.
3 RIDD passive Current adjustment input where an external resistor sets the STC drive capability, e.g. 30 kΩ gives 0.65 mA minimum and 13 kΩ gives 1.85 mA minimum STC usable current.
4 SC passive Receive-level sampling capacitor port, charged by ISCcharge and discharged by ISCdischarge to set the dynamic reference level of comparator TC3.
5 TX output Data receive output (bus to slave) with 3.3 V logic level, VOL 0 to 0.5 V at 100 µA.
6 VDD power_out 3.3 V regulator output (3.15 to 3.7 V at -IVDD = 1 mA) supplied from STC, with a typical output impedance of 5 Ω at 2 to 8 mA.
7 RX input Data transmit input (slave to bus) controlling the 20 mA current source CS3, with VIH 1.8 to 5.5 V and VIL 0 to 1.5 V.
8 BUS1 passive M-Bus input terminal 1 with no polarity requirement, where the bus voltage
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Hangzhou Ruimeng Tech
Package SOP-8-EP
Category Logic
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Bus voltage /BUSL2-BUSL1/ (receive) VMB 10.8 42 V 接收 3
Bus voltage /BUSL2-BUSL1/ (transmit) VMB 13 42 V 发送 3
Ambient operating temperature TA -25 85 ℃ 3
3.3V regulator VDD output voltage VVDD 3.15 3.3 3.7 V -IVDD = 1 mA 4
VDD maximum output ripple 0.7 V 不外接输出电容 4
5.5V regulator STC output voltage VSTC 4.5 5.5 6.5 V 4

CAD (KiCad official)

  • Symbol: MS726
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: ms726-etched.step / ms726-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ms726.step / ms726.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Hangzhou Ruimeng Tech datasheet (11 pp, sha256 e834b6226ede80ab, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF