3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMS5195T
Hangzhou Ruimeng Tech · Analog To Digital Converters (ADC) · TSSOP-24
MS5195T from Hangzhou Ruimeng Tech, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for the serial interface. |
| 2 | CLK | bidirectional | Clock pin that can provide the internal clock output or accept an external clock input, and can disable the internal clock. |
| 3 | CS | input | Chip select input pin. |
| 4 | NC | unconnected | No connection. |
| 5 | AIN6+ /P1 | bidirectional | Positive input for analog channel 6, which doubles as a digital output pin. |
| 6 | AIN6- /P2 | bidirectional | Negative input for analog channel 6, which doubles as a digital output pin. |
| 7 | AIN1+ | input | Positive input pin for analog channel 1. |
| 8 | AIN1- | input | Negative input pin for analog channel 1. |
| 9 | AIN2+ | input | Positive input pin for analog channel 2. |
| 10 | AIN2- | input | Negative input pin for analog channel 2. |
| 11 | AIN3+ | input | Positive input pin for analog channel 3. |
| 12 | AIN3- | input | Negative input pin for analog channel 3. |
| 13 | REFIN1+ | input | Positive input pin for reference voltage 1. |
| 14 | REFIN1- | input | Negative input pin for reference voltage 1. |
| 15 | AIN5+ /IOUT2 | bidirectional | Output pin of the internal excitation current source, which can also serve as the positive input for analog channel 5. |
| 16 | AIN5- /IOUT1 | bidirectional | Output pin of the internal excitation current source, which can also serve as the negative input for analog channel 5. |
| 17 | AIN4+ /REFIN2+ | input | Positive input pin for reference voltage 2, which can also serve as the positive input for analog channel 4. |
| 18 | AIN4- /REFIN2- | input | Negative input pin for reference voltage 2, which can also serve as the negative input for analog channel 4. |
| 19 | PSW | input | Low-side power switch to ground, with 7 to 9 Ω on-resistance and 30 mA allowable current. |
| 20 | GND | power_in | Ground reference pin. |
| 21 | AVDD | power_in | Analog supply voltage, 2.7 V to 5.25 V. |
| 22 | DVDD | power_in | Digital interface supply voltage, between 2.7 V and 5.25 V. |
| 23 | DOUT/RDY | output | Serial data output and data-ready output pin. |
| 24 | DIN | input | Serial data input pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | TSSOP-24 |
| Category | Data Acquisition |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog supply voltage range (absolute maximum) | AVDD | -0.3 | 7 | V | 5 | ||
| Digital supply voltage range (absolute maximum) | DVDD | -0.3 | 7 | V | 5 | ||
| Analog input voltage range (absolute maximum) | AIN | -0.3 | V | 5 | |||
| Reference voltage range (absolute maximum) | VREFIN | -0.3 | V | 5 | |||
| Digital input voltage range (absolute maximum) | -0.3 | V | 5 | ||||
| Digital output voltage range (absolute maximum) | V(LE) | -0.3 | V | 5 | |||
| Input port current (absolute maximum) | 10 | mA | 5 | ||||
| Operating temperature range (absolute maximum) | -40 | 105 | °C | 5 | |||
| Storage temperature range (absolute maximum) | Tstg | -60 | 150 | °C | 5 | ||
| Soldering temperature (absolute maximum) | 260 | °C | 10 sec | 5 | |||
| ESD voltage HBM (absolute maximum rating) | 4000 | V | HBM | 5 | |||
| Analog supply voltage operating range | AVDD | 2.7 | 5.25 | V | 9 | ||
| Digital supply voltage operating range | DVDD | 2.7 | 5.25 | V | 9 | ||
| Output rate | 4.17 | 470 | Hz | ADC通道(斩波使能) | 6 | ||
| Integral nonlinearity | -15 | 15 | ppm of FSR | ADC通道(斩波使能) | 6 | ||
| Offset error | -1 | 1 | uV | ADC通道(斩波使能) | 6 | ||
| Offset error drift | -10 | 10 | nV/°C | ADC通道(斩波使能) | 6 | ||
| Full-scale error | -10 | 10 | uV | ADC通道(斩波使能) | 6 | ||
| Analog input current, gain 1 or 2 | -1 | 1 | nA | buffered模式或打开内部仪表放大器时, Gain = 1 or 2, update rate < 100 Hz | 6 | ||
| Analog input current, gain 4 to 128 | -250 | 250 | pA | buffered模式或打开内部仪表放大器时, Gain = 4 to 128, update rate < 100 Hz | 6 | ||
| Analog input current, AIN3(+)/AIN3(−) | -1 | 1 | nA | AIN3(+)/AIN3(−), update rate < 100 Hz | 6 | ||
| Analog input current temperature drift (buffered or internal in-amp) | -2 | 2 | pA/°C | buffered模式或打开内部仪表放大器时 | 7 | ||
| Analog input current vs voltage (input buffer off) | -400 | 400 | nA/V | 关闭输入buffer时 | 7 | ||
| Analog input current temperature drift vs voltage (input buffer off) | -50 | 50 | pA/V/°C | 关闭输入buffer时 | 7 | ||
| Internal reference initial accuracy | -0.01 | 0.01 | % | 内部参考电压初始精度 (nominal 1.21 V as printed) | 7 | ||
| Internal reference temperature drift | 4 | 15 | ppm/°C | 内部参考电压温漂 | 7 | ||
| External reference input average current temperature drift | -0.03 | 0.03 | nA/V/°C | 参考电压输入平均电流温漂 | 7 | ||
| External reference voltage range | VREF | 0.1 | 2.5 | V | 参考电压值 | 7 | |
| Reference voltage detect level | 0.3 | 0.65 | V | 参考电压检测电平 | 7 | ||
| Excitation current initial tolerance | -5 | 5 | % | 激励电流源(IEXC1和IEXC2) 初始容差 | 7 | ||
| Excitation current matching | -0.5 | 0.5 | % | 激励电流源(IEXC1和IEXC2) 电流匹配 | 7 | ||
| Temperature sensor accuracy | -2 | 2 | °C | 温度传感器精度 | 8 | ||
| Internal clock frequency tolerance | -3 | 3 | % | 内部时钟频率 64 KHz ±3% | 8 | ||
| SCLK and DIN input high threshold | 1.4 | 2 | V | DVDD=5V | 8 | ||
| SCLK and DIN input high threshold | 0.9 | 2 | V | DVDD=3V | 8 | ||
| SCLK and DIN input low threshold | 0.8 | 1.7 | V | DVDD=5V | 8 | ||
| SCLK and DIN input low threshold | 0.4 | 1.35 | V | DVDD=3V | 8 | ||
| SCLK and DIN input hysteresis window | 0.1 | 0.17 | V | DVDD=5V | 8 | ||
| SCLK and DIN input hysteresis window | 0.06 | 0.13 | V | DVDD=3V | 8 | ||
| Logic input current | -10 | 10 | uA | 输入电流 | 9 | ||
| Floating-state leakage current | -10 | 10 | uA | 悬空态漏电流 | 9 | ||
| Supply current, buffer off, external reference | IAVDD | 110 | 140 | uA | AVDD=3V; 关闭输入buffer,外部基准 | 9 | |
| Supply current, buffer off, external reference | IAVDD | 125 | 140 | uA | AVDD=5V; 关闭输入buffer,外部基准 | 9 | |
| Supply current, buffer on, gain 1 and 2, external reference | IAVDD | 130 | 180 | uA | AVDD=3V; 打开输入buffer,增益设置1和2, 外部基准 | 9 | |
| Supply current, buffer on, gain 1 and 2, external reference | IAVDD | 165 | 180 | uA | AVDD=5V; 打开输入buffer,增益设置1和2, 外部基准 | 9 | |
| Supply current, gain 4 to 128, external reference | IAVDD | 300 | 400 | uA | AVDD=3V; 增益设置4到128,外部基准 | 9 | |
| Supply current, gain 4 to 128, external reference | IAVDD | 350 | 400 | uA | AVDD=5V; 增益设置4到128,外部基准 | 9 | |
| Supply current, gain 4 to 128, internal reference | IAVDD | 380 | 500 | uA | AVDD=3V; 增益设置4到128,内部基准 | 9 | |
| Supply current, gain 4 to 128, internal reference | IAVDD | 440 | 500 | uA | AVDD=5V; 增益设置4到128,内部基准 | 9 |
CAD (KiCad official)
- Symbol:
MS5195T - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
ms5195t-etched.step/ms5195t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms5195t.step/ms5195t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hangzhou Ruimeng Tech datasheet (17 pp, sha256
5b682b2d793cf770, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).