main
Ray
Publish 0.1.0
58abba7
MS41
Hangzhou Ruimeng Tech · Magnetic Sensors · TO-92S
MS41 from Hangzhou Ruimeng Tech, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vdd | power_in | Supply pin with a recommended operating range of 4.5 V to 24 V and an absolute maximum VDD of -28 V to 28 V. |
| 2 | Gnd | power_in | Ground pin; the datasheet states no separate voltage or current limit for this pin. |
| 3 | Out | output | Current-sink output with an absolute maximum output voltage of -0.5 V to 28 V and an output current of up to 20 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | TO-92S |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (Supply voltage) | VDD | -28 | 28 | V | 3 | ||
| 输出电压 (Output voltage) | VOUT | -0.5 | 28 | V | 3 | ||
| 工作温度 (Operating temperature) | TA | -40 | 150 | C | 3 | ||
| 存储温度 (Storage temperature) | Tstg | -40 | 150 | C | 3 | ||
| 输出电流 (Output current) | Ic | 20 | mA | 3 | |||
| 供电电压 (Supply voltage) | Vs | 4.5 | 24 | V | 3 | ||
| 供电电流 (Supply current) | Is | 3.3 | 7 | mA | 25℃ | 3 | |
| 供电电流 (Supply current) | Is | 10 | mA | 3 | |||
| 输出电流 (Output current) | Iout | 20 | mA | 3 | |||
| 饱和压降 (Saturation voltage) | Vsat | 0.3 | V | @15mA, Gauss>150 | 3 | ||
| 输出漏电流 (Output leakage current) | Ileak | 1 | uA | Gauss<-150 | 3 | ||
| 上升时间 (Rise time) | Trise | 0.1 | 0.3 | us | 25℃ | 3 | |
| 下降时间 (Fall time) | Tfall | 0.2 | 0.4 | us | 25℃ | 3 | |
| 响应时间 (Response time) | Tresponse | 4 | 5 | us | 25℃ | 3 | |
| 工作点 (Operate point) | BOP | 38 | 80 | Gauss | 25℃ | 3 | |
| 工作点 (Operate point) | BOP | 90 | Gauss | 3 | |||
| 释放点 (Release point) | BRP | -80 | 38 | Gauss | 25℃ | 3 | |
| 释放点 (Release point) | BRP | -90 | Gauss | 3 |
CAD (KiCad official)
- Symbol:
MS41 - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files:
ms41-etched.step/ms41-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms41.step/ms41.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hangzhou Ruimeng Tech datasheet (6 pp, sha256
ac55a502b234b247, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MS41
**Hangzhou Ruimeng Tech** · Magnetic Sensors · TO-92S
MS41 from Hangzhou Ruimeng Tech, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vdd | power_in | Supply pin with a recommended operating range of 4.5 V to 24 V and an absolute maximum VDD of -28 V to 28 V. |
| 2 | Gnd | power_in | Ground pin; the datasheet states no separate voltage or current limit for this pin. |
| 3 | Out | output | Current-sink output with an absolute maximum output voltage of -0.5 V to 28 V and an output current of up to 20 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | TO-92S |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (Supply voltage) | VDD | -28 | | 28 | V | | 3 |
| 输出电压 (Output voltage) | VOUT | -0.5 | | 28 | V | | 3 |
| 工作温度 (Operating temperature) | TA | -40 | | 150 | C | | 3 |
| 存储温度 (Storage temperature) | Tstg | -40 | | 150 | C | | 3 |
| 输出电流 (Output current) | Ic | | | 20 | mA | | 3 |
| 供电电压 (Supply voltage) | Vs | 4.5 | | 24 | V | | 3 |
| 供电电流 (Supply current) | Is | | 3.3 | 7 | mA | 25℃ | 3 |
| 供电电流 (Supply current) | Is | | | 10 | mA | | 3 |
| 输出电流 (Output current) | Iout | | | 20 | mA | | 3 |
| 饱和压降 (Saturation voltage) | Vsat | | | 0.3 | V | @15mA, Gauss>150 | 3 |
| 输出漏电流 (Output leakage current) | Ileak | | | 1 | uA | Gauss<-150 | 3 |
| 上升时间 (Rise time) | Trise | | 0.1 | 0.3 | us | 25℃ | 3 |
| 下降时间 (Fall time) | Tfall | | 0.2 | 0.4 | us | 25℃ | 3 |
| 响应时间 (Response time) | Tresponse | | 4 | 5 | us | 25℃ | 3 |
| 工作点 (Operate point) | BOP | | 38 | 80 | Gauss | 25℃ | 3 |
| 工作点 (Operate point) | BOP | | | 90 | Gauss | | 3 |
| 释放点 (Release point) | BRP | -80 | 38 | | Gauss | 25℃ | 3 |
| 释放点 (Release point) | BRP | -90 | | | Gauss | | 3 |
## CAD (KiCad official)
- Symbol: `MS41`
- Footprint: `Package_TO_SOT_THT:TO-92_Inline`
- 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files: `ms41-etched.step` / `ms41-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms41.step` / `ms41.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](docs/ms41-datasheet.pdf) (6 pp, sha256 `ac55a502b234b247`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ms41-datasheet.pdf)