Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MS1242

Hangzhou Ruimeng Tech · Analog To Digital Converters (ADC) · TSSOP-16

MS1242 from Hangzhou Ruimeng Tech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input, specified for 2.7 V to 5.25 V with an absolute maximum of -0.3 V to 6 V.
2 XIN input Clock input for a crystal or external clock; the master clock fosc is specified from 1 MHz to 5 MHz, and 10 to 20 pF capacitors are required on both XIN and XOUT when a crystal is used.
3 XOUT output Clock output pin for the crystal oscillator; the datasheet also states that an external clock is applied through this pin.
4 PDWN input Power-down control input, active low.
5 VREF+ power_in Positive analog reference voltage input; the differential reference (REFP minus REFN) must not exceed 2.5 V at VDD=5 V with RANGE=0 (5.0 V with RANGE=1), or 1.25 V at VDD=3 V with RANGE=0 (2.5 V with RANGE=1), and REFP/REFN must stay within 0 to VDD.
6 VREF- power_in Negative analog reference voltage input; REFP and REFN must stay within 0 to VDD and the differential reference must not exceed the VDD-dependent limit.
7 AIN0/D0 input Analog input channel 0, also usable as data I/O line D0; analog input range is GND-0.1 V to VDD+0.1 V with the buffer off and GND+0.05 V to VDD-1.5 V with the buffer on.
8 AIN1/D1 input Analog input channel 1, also usable as data I/O line D1; analog input range is GND-0.1 V to VDD+0.1 V with the buffer off and GND+0.05 V to VDD-1.5 V with the buffer on.
9 AIN2/D2 input Analog input channel 2, also usable as data I/O line D2; analog input range is GND-0.1 V to VDD+0.1 V with the buffer off and GND+0.05 V to VDD-1.5 V with the buffer on.
10 AIN3/D3 input Analog input channel 3, also usable as data I/O line D3; analog input range is GND-0.1 V to VDD+0.1 V with the buffer off and GND+0.05 V to VDD-1.5 V with the buffer on.
11 GND power_in Ground reference for the device.
12 CS input SPI chip select input, active low; the SPI bus is reset when CS goes high.
13 DIN input SPI serial data input.
14 DOUT output SPI serial data output, which is high impedance (tri-state) when not in use.
15 SCLK input SPI serial clock input with a Schmitt trigger, which must be free of noise to avoid incorrect sampling.
16 DRDY output Data ready output, active low, which goes low when new conversion data is available in the data output register.

Key specifications

Parameter Value
Manufacturer Hangzhou Ruimeng Tech
Package TSSOP-16
Category Data Acquisition
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute) VDD -0.3 6 V 5
Input current, instantaneous Iin 100 mA 瞬时 5
Input current, continuous Iin 10 mA 连续 5
Analog input voltage, lower limit (upper printed as VDD+0.5) Ain -0.5 V upper limit printed as VDD+0.5 5
Digital input voltage, lower limit (upper printed as VDD+0.3) Din -0.3 V upper limit printed as VDD+0.3 5
Digital output voltage, lower limit (upper printed as VDD+0.3) Dout -0.3 V upper limit printed as VDD+0.3 5
Maximum junction temperature Jt 150 C 5
Operating temperature (absolute ratings table) TA -40 85 C 5
Storage temperature Tstg -60 100 C 5
Supply voltage (recommended) VDD 2.7 5.25 V TMIN to TMAX 5
Differential reference voltage max, VDD=5V, RANGE=0 REF 2.5 V VDD=5V, RANGE=0 13
Differential reference voltage max, VDD=5V, RANGE=1 REF 5 V VDD=5V, RANGE=1 13
Differential reference voltage max, VDD=3V, RANGE=0 REF 1.25 V VDD=3V, RANGE=0 13
Differential reference voltage max, VDD=3V, RANGE=1 REF 2.5 V VDD=3V, RANGE=1 13
Input high-level leakage current IIH 10 uA 5
Input low-level leakage current IIL -10 uA 5
Master clock frequency fosc 1 5 MHz 5
Master clock period Tosc 200 1000 ns 1/fOSC 5
Integral nonlinearity, VDD=+5V table -0.0015 0.0015 % of FS 6
PGA gain range 1 128 6
Power supply rejection ratio DC, VDD=+5V table 80 95 dB 直流 6
Reference voltage REF, RANGE=0, VDD=+5V table REF 0.1 2.5 2.6 V RANGE = 0 6
Reference voltage REF, RANGE=1, VDD=+5V table REF 0.1 V RANGE = 1 6
REFP, REFN input range, RANGE=0, VDD=+5V table REFP, REFN 0 V RANGE = 0 6
REFP, REFN input range, RANGE=1, VDD=+5V table REFP, REFN 0 V RANGE = 1 6
Offset DAC gain error -10 10 % 7
Supply voltage VDD, 5V table VDD 4.75 5.25 V 7
Supply current, 5V table, PGA=1, buffer off 240 375 uA PGA = 1,Buffer 关闭 7
Supply current, 5V table, PGA=128, buffer off 450 800 uA PGA = 128,Buffer 关闭 7
Supply current, 5V table, PGA=1, buffer on 290 425 uA PGA = 1,Buffer 打开 7
Supply current, 5V table, PGA=128, buffer on 960 1400 uA PGA = 128,Buffer 打开 7
Power dissipation, 5V table, PGA=1, buffer off 1.2 1.9 mW PGA = 1, Buffer 关闭 7
Power supply rejection ratio DC, VDD=+3V table 75 90 dB 直流 8
Reference voltage REF, RANGE=0, VDD=+3V table REF 0.1 1.25 1.26 V RANGE = 0 8
Reference voltage REF, RANGE=1, VDD=+3V table REF 0.1 2.5 2.6 V RANGE = 1 8
REFP, REFN input range, RANGE=0, VDD=+3V table REFP, REFN 0 V RANGE = 0 8
REFP, REFN input range, RANGE=1, VDD=+3V table REFP, REFN 0 V RANGE = 1 8
Supply voltage VDD, 3V table VDD 2.7 3.3 V 9
Supply current, 3V table, PGA=1, buffer off 190 375 uA PGA = 1,Buffer 关闭 9
Supply current, 3V table, PGA=128, buffer off 460 700 uA PGA = 128,Buffer 关闭 9
Supply current, 3V table, PGA=1, buffer on 240 375 uA PGA = 1,Buffer 打开 9
Supply current, 3V table, PGA=128, buffer on 870 1325 uA PGA = 128,Buffer 打开 9
Power dissipation, 3V table, PGA=1, buffer off 0.6 1.2 mW PGA = 1, Buffer 关闭 9

CAD (KiCad official)

  • Symbol: MS1242
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: ms1242-etched.step / ms1242-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ms1242.step / ms1242.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Hangzhou Ruimeng Tech datasheet (27 pp, sha256 150cce2e87cea6bc, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF