main
Ray
ms1224: laser-etched CAD + chip hero (factory 2.0.0 backfill)
e290ed2
MS1224
Hangzhou Ruimeng Tech · LVDS ICs · SSOP-28-208mil
MS1224 from Hangzhou Ruimeng Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground for the internal PLL and analog blocks. Tie all AGND pins directly to the board ground plane. |
| 2 | RCLK_R/F | input | LVTTL input that selects the RCLK edge used to latch ROUT[0:9] data. Low = falling-edge filtering; High = rising-edge filtering. |
| 3 | REFCLK | input | LVTTL reference clock input for the receive PLL, 10 MHz to 80 MHz. Frequency tolerance ±100 ppm; duty cycle 30% - 70%; edge time ≤6 ns. |
| 4 | AVCC | power_in | Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V, 3.3 V typical). Decouple locally to AGND. |
| 5 | RI+ | input | LVDS differential serial data input, positive side. Differential threshold ±50 mV; common-mode range VID/2 to (2.4 V - VID/2). Pair with RI- across a 100 Ω termination. |
| 6 | RI- | input | LVDS differential serial data input, negative side. Paired with RI+ (pin 5); requires 100 Ω differential termination close to the receiver. |
| 7 | PWRDN | input | Active-low LVTTL power-down input. Driving low (>=16 ns) disables the PLL, forces outputs to high-Z and places the device in a low-power sleep drawing microamps of ICC. Drive high for normal operation. |
| 8 | REN | input | Active-low LVTTL receiver-enable input. Low forces ROUT0-ROUT9 and RCLK into high-impedance while /LOCK remains active to track PLL state. High enables the parallel outputs. |
| 9 | RCLK | output | Recovered LVTTL parallel-data clock output used to latch ROUT0-ROUT9. Runs at the recovered word rate (10 MHz - 80 MHz); output edge selected by RCLK_R/F. |
| 10 | LOCK | output | Active-low LVTTL lock-status output. Goes low when the deserializer PLL is locked to the embedded clock; high indicates loss of lock and the parallel outputs (and RCLK) are invalid/high-Z. |
| 11 | AVCC | power_in | Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V). Bypass close to the pin with AGND return. |
| 12 | AGND | power_in | Analog ground return for the PLL and analog circuitry. |
| 13 | AGND | power_in | Analog ground return for the PLL and analog circuitry. |
| 14 | DGND | power_in | Digital ground return for the LVTTL output drivers and digital core. |
| 15 | ROUT9 | output | Parallel LVTTL data output, bit 9 (MSB of the 10-bit recovered word). VOH >= 2.2 V at IOH = -5 mA; VOL <= 0.5 V at IOL = 5 mA. Valid when /LOCK is low. |
| 16 | ROUT8 | output | Parallel LVTTL data output, bit 8. Latched on the RCLK edge selected by RCLK_R/F. |
| 17 | ROUT7 | output | Parallel LVTTL data output, bit 7. Latched on the RCLK edge selected by RCLK_R/F. |
| 18 | ROUT6 | output | Parallel LVTTL data output, bit 6. Latched on the RCLK edge selected by RCLK_R/F. |
| 19 | ROUT5 | output | Parallel LVTTL data output, bit 5. Latched on the RCLK edge selected by RCLK_R/F. |
| 20 | DGND | power_in | Digital ground return for the LVTTL output drivers. |
| 21 | DVCC | power_in | Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. Decouple close to the pin. |
| 22 | DGND | power_in | Digital ground return for the LVTTL output drivers. |
| 23 | DVCC | power_in | Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. |
| 24 | ROUT4 | output | Parallel LVTTL data output, bit 4. Latched on the RCLK edge selected by RCLK_R/F. |
| 25 | ROUT3 | output | Parallel LVTTL data output, bit 3. Latched on the RCLK edge selected by RCLK_R/F. |
| 26 | ROUT2 | output | Parallel LVTTL data output, bit 2. Latched on the RCLK edge selected by RCLK_R/F. |
| 27 | ROUT1 | output | Parallel LVTTL data output, bit 1. Latched on the RCLK edge selected by RCLK_R/F. |
| 28 | ROUT0 | output | Parallel LVTTL data output, bit 0 (LSB of the 10-bit recovered word). Latched on the RCLK edge selected by RCLK_R/F. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
MS1224 - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
ms1224-etched.step/ms1224-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms1224.step/ms1224.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hangzhou Ruimeng Tech datasheet (None pp, sha256
a2a820963051c0eb, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MS1224
**Hangzhou Ruimeng Tech** · LVDS ICs · SSOP-28-208mil
MS1224 from Hangzhou Ruimeng Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground for the internal PLL and analog blocks. Tie all AGND pins directly to the board ground plane. |
| 2 | RCLK_R/F | input | LVTTL input that selects the RCLK edge used to latch ROUT[0:9] data. Low = falling-edge filtering; High = rising-edge filtering. |
| 3 | REFCLK | input | LVTTL reference clock input for the receive PLL, 10 MHz to 80 MHz. Frequency tolerance ±100 ppm; duty cycle 30% - 70%; edge time ≤6 ns. |
| 4 | AVCC | power_in | Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V, 3.3 V typical). Decouple locally to AGND. |
| 5 | RI+ | input | LVDS differential serial data input, positive side. Differential threshold ±50 mV; common-mode range VID/2 to (2.4 V - VID/2). Pair with RI- across a 100 Ω termination. |
| 6 | RI- | input | LVDS differential serial data input, negative side. Paired with RI+ (pin 5); requires 100 Ω differential termination close to the receiver. |
| 7 | PWRDN | input | Active-low LVTTL power-down input. Driving low (>=16 ns) disables the PLL, forces outputs to high-Z and places the device in a low-power sleep drawing microamps of ICC. Drive high for normal operation. |
| 8 | REN | input | Active-low LVTTL receiver-enable input. Low forces ROUT0-ROUT9 and RCLK into high-impedance while /LOCK remains active to track PLL state. High enables the parallel outputs. |
| 9 | RCLK | output | Recovered LVTTL parallel-data clock output used to latch ROUT0-ROUT9. Runs at the recovered word rate (10 MHz - 80 MHz); output edge selected by RCLK_R/F. |
| 10 | LOCK | output | Active-low LVTTL lock-status output. Goes low when the deserializer PLL is locked to the embedded clock; high indicates loss of lock and the parallel outputs (and RCLK) are invalid/high-Z. |
| 11 | AVCC | power_in | Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V). Bypass close to the pin with AGND return. |
| 12 | AGND | power_in | Analog ground return for the PLL and analog circuitry. |
| 13 | AGND | power_in | Analog ground return for the PLL and analog circuitry. |
| 14 | DGND | power_in | Digital ground return for the LVTTL output drivers and digital core. |
| 15 | ROUT9 | output | Parallel LVTTL data output, bit 9 (MSB of the 10-bit recovered word). VOH >= 2.2 V at IOH = -5 mA; VOL <= 0.5 V at IOL = 5 mA. Valid when /LOCK is low. |
| 16 | ROUT8 | output | Parallel LVTTL data output, bit 8. Latched on the RCLK edge selected by RCLK_R/F. |
| 17 | ROUT7 | output | Parallel LVTTL data output, bit 7. Latched on the RCLK edge selected by RCLK_R/F. |
| 18 | ROUT6 | output | Parallel LVTTL data output, bit 6. Latched on the RCLK edge selected by RCLK_R/F. |
| 19 | ROUT5 | output | Parallel LVTTL data output, bit 5. Latched on the RCLK edge selected by RCLK_R/F. |
| 20 | DGND | power_in | Digital ground return for the LVTTL output drivers. |
| 21 | DVCC | power_in | Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. Decouple close to the pin. |
| 22 | DGND | power_in | Digital ground return for the LVTTL output drivers. |
| 23 | DVCC | power_in | Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. |
| 24 | ROUT4 | output | Parallel LVTTL data output, bit 4. Latched on the RCLK edge selected by RCLK_R/F. |
| 25 | ROUT3 | output | Parallel LVTTL data output, bit 3. Latched on the RCLK edge selected by RCLK_R/F. |
| 26 | ROUT2 | output | Parallel LVTTL data output, bit 2. Latched on the RCLK edge selected by RCLK_R/F. |
| 27 | ROUT1 | output | Parallel LVTTL data output, bit 1. Latched on the RCLK edge selected by RCLK_R/F. |
| 28 | ROUT0 | output | Parallel LVTTL data output, bit 0 (LSB of the 10-bit recovered word). Latched on the RCLK edge selected by RCLK_R/F. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
## CAD (KiCad official)
- Symbol: `MS1224`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `ms1224-etched.step` / `ms1224-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms1224.step` / `ms1224.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](docs/ms1224-datasheet.pdf) (None pp, sha256 `a2a820963051c0eb`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ms1224-datasheet.pdf)