component
MS05W2F700NT5E
Public Made by Adomby adom
UNI ROYAL Uniroyal Elec Current Sense Resistors / Shunt Resistors, 0805. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMS05W2F700NT5E
UNI ROYAL Uniroyal Elec · Current Sense Resistors / Shunt Resistors · 0805
MS05W2F700NT5E from UNI ROYAL Uniroyal Elec, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UNI ROYAL Uniroyal Elec |
| Package | 0805 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance range (1/2W, ±100 ppm/℃ row) | R | 5 | 9 | mΩ | MS05 (0805) 1/2W, TCR ±100 row, resistance range 5mΩ~9mΩ; MPN value 7mΩ falls in range | 3 | |
| Resistance tolerance | -1 | 1 | % | Tolerance code F = ±1% | 2 | ||
| Temperature coefficient | TCR | -100 | 100 | ppm/℃ | MS05 1/2W, 5mΩ~9mΩ row; t1: +25℃ or specified room temperature; t2: +125℃ | 3 | |
| Max. rating current | 10 | A | MS05 1/2W, ±100 ppm/℃ row, resistance 5mΩ~9mΩ | 3 | |||
| Max. overload current | 22.36 | A | MS05 1/2W, ±100 ppm/℃ row, resistance 5mΩ~9mΩ | 3 | |||
| Rated power | P | 0.5 | W | Power at 70℃; printed as 1/2W for MS05 (code W2 in part number); derate above 70℃ | 3 | ||
| Operating temperature range | -55 | 155 | ℃ | MS02~MS12 range; MS05 is within this range | 3 | ||
| Short-time overload resistance change | ΔR/R | -1 | 1 | % | ±(1.0%+0.001Ω); 5 times rated power for 5 seconds | 6 | |
| Low temperature storage resistance change | ΔR/R | -1 | 1 | % | ±(1.0%+0.001Ω); IEC 60068-2-1 (Aa), lower limit temperature, 1000 h | 6 | |
| High temperature exposure resistance change | ΔR/R | -1 | 1 | % | ±(1.0%+0.001Ω); MIL-STD-202 108A, upper limit temperature, 1000 h | 6 | |
| Soldering heat resistance change | ΔR/R | -1 | 1 | % | ±(1.0%+0.005Ω); dipped into solder at 260℃ for 10 seconds | 6 | |
| Solderability coverage | 95 | % | More than 95% coverage rate; solder 245±3℃, hold 2~3 seconds | 6 | |||
| Load life resistance change | ΔR/R | -2 | 2 | % | ±(2.0%+0.001Ω); 1000 h at RCWV or max working voltage (whichever less), 1.5 h ON / 0.5 h OFF, 70±2℃ ambient | 6 | |
| Load life in humidity resistance change | ΔR/R | -2 | 2 | % | ±(2.0%+0.001Ω); 1000 h, 1.5 h ON / 0.5 h OFF at RCWV or max working voltage (whichever less), 40±2℃, 93%±3% RH | 6 | |
| Resistance (nominal, from part number) | R | 7 | mΩ | Decoded from part number codes 700 with multiplier N (10^-5 Ω) = 7 mΩ; printed as 7mΩ within range | 2 |
CAD (KiCad official)
- Symbol:
MS05W2F700NT5E - Footprint:
Resistor_SMD:R_0805_2012Metric - 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files:
ms05w2f700nt5e-etched.step/ms05w2f700nt5e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms05w2f700nt5e.step/ms05w2f700nt5e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UNI ROYAL Uniroyal Elec datasheet (9 pp, sha256
b31ca0508cc0d982, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).