← Commit history

Initial commit: component/mpu-6000

Ray ·f606594df6 ·
2 files changed +307
README.mdadded+61
@@ -0,0 +1,61 @@+# MPU-6000++**TDK InvenSense** · Accelerometers · QFN-24-EP(4x4)++MPU-6000 from TDK InvenSense, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CLKIN | input | Optional external reference clock input supporting 32.768kHz or 19.2MHz (connect to GND if unused). |+| 2 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 3 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 4 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 5 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 6 | AUX_DA | bidirectional | I2C master serial data line for auxiliary sensor interface with open-drain output (voltage referenced to VDD). |+| 7 | AUX_CL | bidirectional | I2C master serial clock line for auxiliary sensor interface with open-drain output (voltage referenced to VDD). |+| 8 | /CS | input | SPI chip select (active low) that selects device for SPI communication when driven low. |+| 9 | AD0 / SDO | tri_state | I2C slave address LSB input (AD0) setting device address to 0x68 or 0x69, or SPI serial data output (SDO) with tri-state capability in SPI mode. |+| 10 | REGOUT | passive | Regulator filter capacitor connection for internal LDO bypass (use 0.1µF ceramic capacitor). |+| 11 | FSYNC | input | Frame synchronization digital input for external frame sync signal support (connect to GND if unused). |+| 12 | INT | output | Interrupt digital output (selectable totem pole or open-drain) signaling data ready, motion detection, freefall, or I2C errors. |+| 13 | VDD | power_in | Power supply voltage input with operating range 2.375V to 3.46V (bypass with 0.1µF ceramic capacitor). |+| 14 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 15 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 16 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 17 | NC | unconnected | Not internally connected but may be used for PCB trace routing. |+| 18 | GND | power_in | Power supply ground and return path. |+| 19 | RESV | unconnected | Reserved pin that must not be connected. |+| 20 | CPOUT | passive | Charge pump output capacitor connection (use 2.2nF ceramic capacitor rated for 50V). |+| 21 | RESV | unconnected | Reserved pin that must not be connected. |+| 22 | CLKOUT | output | System clock output enabled by CLKOUTEN=1 with reference clock frequency at 1.024MHz nominal. |+| 23 | SCL / SCLK | bidirectional | I2C serial clock line with open-drain output and 400kHz maximum frequency, or SPI serial clock input with up to 20MHz in read-sensor mode. |+| 24 | SDA / SDI | bidirectional | I2C serial data line with open-drain output and 400kHz maximum frequency, or SPI serial data input with up to 20MHz data rate in read-sensor mode. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TDK InvenSense |+| Package | QFN-24-EP(4x4) |+| Category | Sensors |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `MPU-6000`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `mpu-6000-etched.step` / `mpu-6000-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mpu-6000.step` / `mpu-6000.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TDK InvenSense datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893692048785408) (57 pp, sha256 `7e87555c386d880a`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mpu-6000-datasheet.pdf)
page.jsonadded+246
@@ -0,0 +1,246 @@+{+  "slug": "mpu-6000",+  "version": "0.1.0",+  "type": "component",+  "description": "TDK InvenSense Accelerometers, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "mpu-6000",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mpu-6000.kicad_sym",+    "mpu-6000.kicad_mod",+    "mpu-6000.glb",+    "mpu-6000.step",+    "mpu-6000.lbr",+    "docs/hero.png",+    "docs/mpu-6000-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MPU-6000",+    "manufacturer": "TDK InvenSense",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893692048785408",+    "parts": {+      "symbol": "mpu-6000.kicad_sym",+      "footprint": "mpu-6000.kicad_mod",+      "model_3d": "mpu-6000-etched.glb",+      "model_3d_plain": "mpu-6000.glb",+      "model_3d_step": "mpu-6000-etched.step",+      "model_3d_step_plain": "mpu-6000.step",+      "lbr": "mpu-6000.lbr"+    },+    "distributor_links": {+      "lcsc": "C92401"+    },+    "pins": [+      {+        "number": "1",+        "name": "CLKIN",+        "type": "input",+        "description": "Optional external reference clock input supporting 32.768kHz or 19.2MHz (connect to GND if unused)."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "6",+        "name": "AUX_DA",+        "type": "bidirectional",+        "description": "I2C master serial data line for auxiliary sensor interface with open-drain output (voltage referenced to VDD)."+      },+      {+        "number": "7",+        "name": "AUX_CL",+        "type": "bidirectional",+        "description": "I2C master serial clock line for auxiliary sensor interface with open-drain output (voltage referenced to VDD)."+      },+      {+        "number": "8",+        "name": "/CS",+        "type": "input",+        "description": "SPI chip select (active low) that selects device for SPI communication when driven low."+      },+      {+        "number": "9",+        "name": "AD0 / SDO",+        "type": "tri_state",+        "description": "I2C slave address LSB input (AD0) setting device address to 0x68 or 0x69, or SPI serial data output (SDO) with tri-state capability in SPI mode."+      },+      {+        "number": "10",+        "name": "REGOUT",+        "type": "passive",+        "description": "Regulator filter capacitor connection for internal LDO bypass (use 0.1µF ceramic capacitor)."+      },+      {+        "number": "11",+        "name": "FSYNC",+        "type": "input",+        "description": "Frame synchronization digital input for external frame sync signal support (connect to GND if unused)."+      },+      {+        "number": "12",+        "name": "INT",+        "type": "output",+        "description": "Interrupt digital output (selectable totem pole or open-drain) signaling data ready, motion detection, freefall, or I2C errors."+      },+      {+        "number": "13",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply voltage input with operating range 2.375V to 3.46V (bypass with 0.1µF ceramic capacitor)."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "15",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "16",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "17",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected but may be used for PCB trace routing."+      },+      {+        "number": "18",+        "name": "GND",+        "type": "power_in",+        "description": "Power supply ground and return path."+      },+      {+        "number": "19",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin that must not be connected."+      },+      {+        "number": "20",+        "name": "CPOUT",+        "type": "passive",+        "description": "Charge pump output capacitor connection (use 2.2nF ceramic capacitor rated for 50V)."+      },+      {+        "number": "21",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin that must not be connected."+      },+      {+        "number": "22",+        "name": "CLKOUT",+        "type": "output",+        "description": "System clock output enabled by CLKOUTEN=1 with reference clock frequency at 1.024MHz nominal."+      },+      {+        "number": "23",+        "name": "SCL / SCLK",+        "type": "bidirectional",+        "description": "I2C serial clock line with open-drain output and 400kHz maximum frequency, or SPI serial clock input with up to 20MHz in read-sensor mode."+      },+      {+        "number": "24",+        "name": "SDA / SDI",+        "type": "bidirectional",+        "description": "I2C serial data line with open-drain output and 400kHz maximum frequency, or SPI serial data input with up to 20MHz data rate in read-sensor mode."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 9 (AD0/SDO) has dual functionality: serves as I2C slave address LSB input in I2C mode or as SPI ; Pins 23 (SCL/SCLK) and 24 (SDA/SDI) have dual functionality: operate as open-drain bidirectional I2C",+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 57,+        "cost_usd": 0.4544,+        "at": "2026-09-18T02:59:51"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893692048785408",+        "pages": 57,+        "sha256": "7e87555c386d880a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file