main
Ray
Publish 0.1.0
ad824f0
MPQ7221GRE-AEC1-Z
Monolithic Power Systems · LED Drivers · QFN-24(4x4)
MPQ7221GRE-AEC1-Z from Monolithic Power Systems, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RFSH/FLT | output | Outputs a synchronized refresh signal set via the FRFSH register when FLTEN = 0, or a fault indicator pulled low when a fault is triggered when FLTEN = 1. |
| 2 | EN | input | Enable control: pull low to disable the IC and high to enable it. |
| 3 | SCL | input | I2C interface clock input. |
| 4 | SDA | bidirectional | I2C interface data pin (described in the datasheet as the I2C data input). |
| 5 | ADDR | passive | I2C address setting via a resistor (RADDR) to GND, using the four LSBs of the address, with 10 different addresses configurable. |
| 6 | ISET | passive | LED current setting: connect a current-setting resistor from ISET to ground to configure the current in each LED string. |
| 7 | LED1 | input | LED channel 1 current input; connect the LED channel 1 cathode to this pin. |
| 8 | LED2 | input | LED channel 2 current input; connect the LED channel 2 cathode to this pin. |
| 9 | LED3 | input | LED channel 3 current input; connect the LED channel 3 cathode to this pin. |
| 10 | LED4 | input | LED channel 4 current input; connect the LED channel 4 cathode to this pin. |
| 11 | LED5 | input | LED channel 5 current input; connect the LED channel 5 cathode to this pin. |
| 12 | LED6 | input | LED channel 6 current input; connect the LED channel 6 cathode to this pin. |
| 13 | LED7 | input | LED channel 7 current input; connect the LED channel 7 cathode to this pin. |
| 14 | GND | power_in | Ground. |
| 15 | LED8 | input | LED channel 8 current input; connect the LED channel 8 cathode to this pin. |
| 16 | LED9 | input | LED channel 9 current input; connect the LED channel 9 cathode to this pin. |
| 17 | LED10 | input | LED channel 10 current input; connect the LED channel 10 cathode to this pin. |
| 18 | LED11 | input | LED channel 11 current input; connect the LED channel 11 cathode to this pin. |
| 19 | LED12 | input | LED channel 12 current input; connect the LED channel 12 cathode to this pin. |
| 20 | LED13 | input | LED channel 13 current input; connect the LED channel 13 cathode to this pin. |
| 21 | LED14 | input | LED channel 14 current input; connect the LED channel 14 cathode to this pin. |
| 22 | LED15 | input | LED channel 15 current input; connect the LED channel 15 cathode to this pin. |
| 23 | LED16 | input | LED channel 16 current input; connect the LED channel 16 cathode to this pin. |
| 24 | VIN | power_in | Power supply input for the IC (4.5V to 16V recommended operating range), which must be locally bypassed. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-24(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 4.5 | 16 | V | 6 | ||
| Input UVLO threshold rising | VIN_UVLO | 3.6 | 3.8 | 4.2 | V | Rising edge | 6 |
| Input UVLO threshold falling | VIN_UVLO | 3.3 | 3.5 | 3.7 | V | Falling edge | 6 |
| RFSH/FLT output frequency | fRFSH/FLT | 285 | 300 | 315 | Hz | FRFSH[9:0] = 0x1A9, FPWM[2:0] = 01 | 6 |
| ISET voltage | VISET | 1.176 | 1.2 | 1.224 | V | TJ = 25°C | 6 |
| LED current (50mA) | ILED | -5 | 50 | 5 | % | RISET = 24kΩ, ICHx[5:0] = 0x3F (typ in mA) | 6 |
| LED current (50mA), 25°C | ILED | -3 | 50 | 3 | % | RISET = 24kΩ, ICHx[5:0] = 0x3F, TJ = 25°C (typ in mA) | 6 |
| LED current (80mA) | ILED | -5 | 80 | 5 | % | RISET = 15kΩ, ICHx[5:0] = 0x3F (typ in mA) | 6 |
| LED current (80mA), 25°C | ILED | -3 | 80 | 3 | % | RISET = 15kΩ, ICHx[5:0] = 0x3F, TJ = 25°C (typ in mA) | 6 |
| Current sink headroom | VLEDx | 200 | 300 | mV | ILED = 50mA | 6 | |
| Current sink headroom | VLEDx | 350 | 450 | mV | ILED = 80mA | 6 | |
| PWM frequency | fPWM | 240 | 250 | 260 | Hz | 6 | |
| LED short-string protection threshold | VSLP | 2.85 | 3 | 3.15 | V | STH[1:0] = 01 | 6 |
| LED open-string protection threshold | VLED_UV | 100 | 150 | mV | 7 | ||
| Input logic low | VIL | 0 | 0.4 | V | 7 | ||
| Input logic high | VIH | 1.3 | V | printed as 1.3V | 7 | ||
| Output logic low | VOL | 0.4 | V | ILOAD = 3mA | 7 | ||
| SCL clock frequency | fSCL | 1200 | kHz | 7 | |||
| SCL high time | tHIGH | 0.32 | μs | 7 | |||
| SCL low time | tLOW | 0.12 | μs | 7 | |||
| Data set-up time | tSU_DAT | 10 | ns | 7 | |||
| Data hold time | tHD_DAT | 0 | 0.15 | μs | 7 | ||
| Set-up time repeated start | tSU_STA | 0.16 | μs | 7 | |||
| Hold time start condition | tHD_STA | 0.16 | μs | 7 | |||
| Set-up time stop condition | tSU_STO | 0.16 | μs | 7 | |||
| SCL rising time after repeated start and ACK | tR_CL1 | 20 | 160 | ns | 7 | ||
| SCL rising time | tR_CL | 20 | 80 | ns | 7 | ||
| SCL falling time | tF_CL | 20 | 80 | ns | 7 | ||
| SDA rising time | tR_DA | 20 | 160 | ns | 7 | ||
| SDA falling time | tF_DA | 20 | 160 | ns | 7 | ||
| Pulse width of suppressed spike | tSP | 0 | 10 | ns | 7 | ||
| Capacitance bus for each bus line | CB | 400 | pF | 7 | |||
| Quiescent supply current | IQ | 5 | mA | 6 | |||
| Shutdown supply current | ISD | 2 | μA | VEN = 0V, VIN = 16V | 6 | ||
| EN rising threshold | VEN_ON | 2.1 | V | EN rising | 6 | ||
| EN falling threshold | VEN_OFF | 0.8 | V | EN falling | 6 | ||
| EN pull-down resistor | REN | 1 | MΩ | 6 | |||
| RFSH/FLT pull-down resistor | 100 | Ω | FLTEN = 1, fault triggered | 6 | |||
| PWM duty step | tPWM | 1 | μs | 12-bit resolution, fPWM = 250Hz | 6 | ||
| Phase shift | tDELAY | 40 | μs | PS_EN = 1 | 6 | ||
| ILED step | 1.25 | mA | ILED = 80mA, analog dimming step | 6 | |||
| ILED slew rate in PWM dimming | 5 | μs | SLEW[2:0] = 01, rising edge | 6 | |||
| ILED slew rate in PWM dimming | 20 | μs | SLEW[1:0] = 11, rising edge | 6 | |||
| LED short-string protection time | tSLP | 4 | ms | VLEDx > STH | 6 | ||
| LED short-string protection hiccup time | tSLP_HICCUP | 1 | ms | 6 | |||
| LED short-string hiccup detection time | VSLP_DET | 32 | μs | 7 | |||
| LED open-string protection time | tLEDO | 4 | ms | VLEDx < 100mV | 7 | ||
| LED open-string protection hiccup time | tSLP_HICCUP | 1 | ms | 7 | |||
| LED open-string hiccup detection time | VSLP_DET | 32 | μs | 7 | |||
| Thermal shutdown threshold | TST | 170 | °C | Derived from bench characterization, not tested in production | 7 | ||
| Thermal shutdown hysteresis | TST_HYS | 20 | °C | Derived from bench characterization, not tested in production | 7 | ||
| VIN supply voltage (abs max) | VIN | -0.3 | 22 | V | 5 | ||
| LED pin voltage (abs max) | VLED1 to VLED16 | -0.5 | 22 | V | 5 | ||
| All other pins (abs max) | -0.3 | 5 | V | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Lead temperature | 260 | °C | 5 | ||||
| Supply voltage (recommended) | VIN | 4.5 | 16 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Thermal resistance junction-case | θJC | 9 | °C/W | JESD51-7, QFN-24 (4mmx4mm) | 5 |
CAD (KiCad official)
- Symbol:
MPQ7221GRE-AEC1-Z - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
mpq7221gre-aec1-z-etched.step/mpq7221gre-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq7221gre-aec1-z.step/mpq7221gre-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (38 pp, sha256
b64f1a82e34d637b, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MPQ7221GRE-AEC1-Z
**Monolithic Power Systems** · LED Drivers · QFN-24(4x4)
MPQ7221GRE-AEC1-Z from Monolithic Power Systems, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RFSH/FLT | output | Outputs a synchronized refresh signal set via the FRFSH register when FLTEN = 0, or a fault indicator pulled low when a fault is triggered when FLTEN = 1. |
| 2 | EN | input | Enable control: pull low to disable the IC and high to enable it. |
| 3 | SCL | input | I2C interface clock input. |
| 4 | SDA | bidirectional | I2C interface data pin (described in the datasheet as the I2C data input). |
| 5 | ADDR | passive | I2C address setting via a resistor (RADDR) to GND, using the four LSBs of the address, with 10 different addresses configurable. |
| 6 | ISET | passive | LED current setting: connect a current-setting resistor from ISET to ground to configure the current in each LED string. |
| 7 | LED1 | input | LED channel 1 current input; connect the LED channel 1 cathode to this pin. |
| 8 | LED2 | input | LED channel 2 current input; connect the LED channel 2 cathode to this pin. |
| 9 | LED3 | input | LED channel 3 current input; connect the LED channel 3 cathode to this pin. |
| 10 | LED4 | input | LED channel 4 current input; connect the LED channel 4 cathode to this pin. |
| 11 | LED5 | input | LED channel 5 current input; connect the LED channel 5 cathode to this pin. |
| 12 | LED6 | input | LED channel 6 current input; connect the LED channel 6 cathode to this pin. |
| 13 | LED7 | input | LED channel 7 current input; connect the LED channel 7 cathode to this pin. |
| 14 | GND | power_in | Ground. |
| 15 | LED8 | input | LED channel 8 current input; connect the LED channel 8 cathode to this pin. |
| 16 | LED9 | input | LED channel 9 current input; connect the LED channel 9 cathode to this pin. |
| 17 | LED10 | input | LED channel 10 current input; connect the LED channel 10 cathode to this pin. |
| 18 | LED11 | input | LED channel 11 current input; connect the LED channel 11 cathode to this pin. |
| 19 | LED12 | input | LED channel 12 current input; connect the LED channel 12 cathode to this pin. |
| 20 | LED13 | input | LED channel 13 current input; connect the LED channel 13 cathode to this pin. |
| 21 | LED14 | input | LED channel 14 current input; connect the LED channel 14 cathode to this pin. |
| 22 | LED15 | input | LED channel 15 current input; connect the LED channel 15 cathode to this pin. |
| 23 | LED16 | input | LED channel 16 current input; connect the LED channel 16 cathode to this pin. |
| 24 | VIN | power_in | Power supply input for the IC (4.5V to 16V recommended operating range), which must be locally bypassed. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-24(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 4.5 | | 16 | V | | 6 |
| Input UVLO threshold rising | VIN_UVLO | 3.6 | 3.8 | 4.2 | V | Rising edge | 6 |
| Input UVLO threshold falling | VIN_UVLO | 3.3 | 3.5 | 3.7 | V | Falling edge | 6 |
| RFSH/FLT output frequency | fRFSH/FLT | 285 | 300 | 315 | Hz | FRFSH[9:0] = 0x1A9, FPWM[2:0] = 01 | 6 |
| ISET voltage | VISET | 1.176 | 1.2 | 1.224 | V | TJ = 25°C | 6 |
| LED current (50mA) | ILED | -5 | 50 | 5 | % | RISET = 24kΩ, ICHx[5:0] = 0x3F (typ in mA) | 6 |
| LED current (50mA), 25°C | ILED | -3 | 50 | 3 | % | RISET = 24kΩ, ICHx[5:0] = 0x3F, TJ = 25°C (typ in mA) | 6 |
| LED current (80mA) | ILED | -5 | 80 | 5 | % | RISET = 15kΩ, ICHx[5:0] = 0x3F (typ in mA) | 6 |
| LED current (80mA), 25°C | ILED | -3 | 80 | 3 | % | RISET = 15kΩ, ICHx[5:0] = 0x3F, TJ = 25°C (typ in mA) | 6 |
| Current sink headroom | VLEDx | | 200 | 300 | mV | ILED = 50mA | 6 |
| Current sink headroom | VLEDx | | 350 | 450 | mV | ILED = 80mA | 6 |
| PWM frequency | fPWM | 240 | 250 | 260 | Hz | | 6 |
| LED short-string protection threshold | VSLP | 2.85 | 3 | 3.15 | V | STH[1:0] = 01 | 6 |
| LED open-string protection threshold | VLED_UV | 100 | | 150 | mV | | 7 |
| Input logic low | VIL | 0 | | 0.4 | V | | 7 |
| Input logic high | VIH | 1.3 | | | V | printed as 1.3V | 7 |
| Output logic low | VOL | | | 0.4 | V | ILOAD = 3mA | 7 |
| SCL clock frequency | fSCL | | | 1200 | kHz | | 7 |
| SCL high time | tHIGH | 0.32 | | | μs | | 7 |
| SCL low time | tLOW | 0.12 | | | μs | | 7 |
| Data set-up time | tSU_DAT | 10 | | | ns | | 7 |
| Data hold time | tHD_DAT | 0 | | 0.15 | μs | | 7 |
| Set-up time repeated start | tSU_STA | 0.16 | | | μs | | 7 |
| Hold time start condition | tHD_STA | 0.16 | | | μs | | 7 |
| Set-up time stop condition | tSU_STO | 0.16 | | | μs | | 7 |
| SCL rising time after repeated start and ACK | tR_CL1 | 20 | | 160 | ns | | 7 |
| SCL rising time | tR_CL | 20 | | 80 | ns | | 7 |
| SCL falling time | tF_CL | 20 | | 80 | ns | | 7 |
| SDA rising time | tR_DA | 20 | | 160 | ns | | 7 |
| SDA falling time | tF_DA | 20 | | 160 | ns | | 7 |
| Pulse width of suppressed spike | tSP | 0 | | 10 | ns | | 7 |
| Capacitance bus for each bus line | CB | | | 400 | pF | | 7 |
| Quiescent supply current | IQ | | 5 | | mA | | 6 |
| Shutdown supply current | ISD | | 2 | | μA | VEN = 0V, VIN = 16V | 6 |
| EN rising threshold | VEN_ON | | 2.1 | | V | EN rising | 6 |
| EN falling threshold | VEN_OFF | | 0.8 | | V | EN falling | 6 |
| EN pull-down resistor | REN | | 1 | | MΩ | | 6 |
| RFSH/FLT pull-down resistor | | | 100 | | Ω | FLTEN = 1, fault triggered | 6 |
| PWM duty step | tPWM | | 1 | | μs | 12-bit resolution, fPWM = 250Hz | 6 |
| Phase shift | tDELAY | | 40 | | μs | PS_EN = 1 | 6 |
| ILED step | | | 1.25 | | mA | ILED = 80mA, analog dimming step | 6 |
| ILED slew rate in PWM dimming | | | 5 | | μs | SLEW[2:0] = 01, rising edge | 6 |
| ILED slew rate in PWM dimming | | | 20 | | μs | SLEW[1:0] = 11, rising edge | 6 |
| LED short-string protection time | tSLP | | 4 | | ms | VLEDx > STH | 6 |
| LED short-string protection hiccup time | tSLP_HICCUP | | 1 | | ms | | 6 |
| LED short-string hiccup detection time | VSLP_DET | | 32 | | μs | | 7 |
| LED open-string protection time | tLEDO | | 4 | | ms | VLEDx < 100mV | 7 |
| LED open-string protection hiccup time | tSLP_HICCUP | | 1 | | ms | | 7 |
| LED open-string hiccup detection time | VSLP_DET | | 32 | | μs | | 7 |
| Thermal shutdown threshold | TST | | 170 | | °C | Derived from bench characterization, not tested in production | 7 |
| Thermal shutdown hysteresis | TST_HYS | | 20 | | °C | Derived from bench characterization, not tested in production | 7 |
| VIN supply voltage (abs max) | VIN | -0.3 | | 22 | V | | 5 |
| LED pin voltage (abs max) | VLED1 to VLED16 | -0.5 | | 22 | V | | 5 |
| All other pins (abs max) | | -0.3 | | 5 | V | | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| Lead temperature | | | | 260 | °C | | 5 |
| Supply voltage (recommended) | VIN | 4.5 | | 16 | V | | 5 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 5 |
| Thermal resistance junction-case | θJC | | 9 | | °C/W | JESD51-7, QFN-24 (4mmx4mm) | 5 |
## CAD (KiCad official)
- Symbol: `MPQ7221GRE-AEC1-Z`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files: `mpq7221gre-aec1-z-etched.step` / `mpq7221gre-aec1-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mpq7221gre-aec1-z.step` / `mpq7221gre-aec1-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mpq7221gre-aec1-z-datasheet.pdf) (38 pp, sha256 `b64f1a82e34d637b`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mpq7221gre-aec1-z-datasheet.pdf)