main
Ray
Publish 0.1.0
9b4ec37
MPQ6532GVE-AEC1-Z
Monolithic Power Systems · Motor Driver ICs · QFN-28(4x5)
MPQ6532GVE-AEC1-Z from Monolithic Power Systems, in a QFN-28(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage (5V to 60V operating) that must be bypassed to ground with a ceramic capacitor, with additional bulk capacitance possibly required. |
| 2 | CPA | passive | Charge pump capacitor terminal; connect a ceramic capacitor (0.47µF typical) between CPA and CPB. |
| 3 | CPB | passive | Charge pump capacitor connection terminal, paired with CPA. |
| 4 | VREG | power_out | Gate drive supply output (9.5V to 13V for VIN of 5.5V to 60V) that needs a ceramic capacitor to ground (10µF typical). |
| 5 | BSTA | passive | Bootstrap for phase A; connect a ceramic capacitor from this pin to SHA (0.1µF to 1µF recommended). |
| 6 | SHA | passive | High-side source connection for phase A. |
| 7 | GHA | output | High-side gate drive for phase A. |
| 8 | GLA | output | Low-side gate drive for phase A. |
| 9 | BSTB | passive | Bootstrap for phase B; connect a ceramic capacitor from this pin to SHB. |
| 10 | SHB | passive | High-side source connection for phase B. |
| 11 | GHB | output | High-side gate drive for phase B. |
| 12 | GLB | output | Low-side gate drive for phase B. |
| 13 | BSTC | passive | Bootstrap for phase C; connect a ceramic capacitor from this pin to SHC. |
| 14 | SHC | passive | High-side source connection for phase C. |
| 15 | GHC | output | High-side gate drive for phase C. |
| 16 | GLC | output | Low-side gate drive for phase C. |
| 17 | LSS | passive | Low-side source connection for the shunt resistor; OCP trips at VLSS-OCP of 0.4V to 0.6V (0.5V typical), or connect directly to ground if not needed. |
| 18 | HC | input | Hall-sensor input for phase C with an internal pull-down resistor. |
| 19 | HB | input | Hall-sensor input for phase B with an internal pull-down resistor. |
| 20 | HA | input | Hall-sensor input for phase A with an internal pull-down resistor. |
| 21 | nBRAKE | input | Brake input; pull active low to turn on all low-side MOSFETs and stop the motor, high for normal operation, with an internal pull-down resistor. |
| 22 | PWM | input | External PWM input; high drives the selected phase high and low drives it low, with an internal pull-down resistor. |
| 23 | DIR | input | Direction input; pull high or low to set the motor rotation direction. |
| 24 | nFAULT | output | Open-drain fault indication output that is pulled low when a fault condition occurs (VOL 0.5V max at 5mA). |
| 25 | nSLEEP | input | Sleep mode input; pull low for low-power sleep mode, high to enable the device, with an internal pull-down. |
| 26 | OC_REF | input | Over-current (short-circuit) protection reference voltage input, recommended range 0.125V to 2.4V. |
| 27 | DT | passive | Dead time setting; connect a resistor to ground to set the dead time (tDEAD(ns) = 60 x R(kΩ)). |
| 28 | GND | power_in | Ground. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-28(4x5) |
| Category | Power Supply Chip |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VIN | 5 | 60 | V | 6 | ||
| Quiescent current | IQ | 1.8 | 4 | mA | nSLEEP = 1, gate not switching | 6 | |
| Sleep current | ISLEEP | 2.5 | µA | nSLEEP = 0 | 6 | ||
| Low input logic threshold | VIL | 0.8 | V | 6 | |||
| High input logic threshold | VIH | 2 | V | 6 | |||
| Input current logic high | IIN(H) | -20 | 20 | µA | VIH = 5V | 6 | |
| Input current logic low | IIN(L) | -20 | 20 | µA | VIL = 0.8V | 6 | |
| Fault low-voltage output | VOL | 0.5 | V | IOUT = 5mA | 6 | ||
| Fault high leakage current output | IOH | 1 | µA | VOUT = 3.3V | 6 | ||
| UVLO rising threshold | VIN_RISING | 3.2 | 3.9 | 5 | V | 6 | |
| VREG rising threshold | VREG_RISING | 6.8 | 7.6 | 8.4 | V | 6 | |
| OC_REF threshold | VOC_REF | 0.8 | 1 | 1.2 | V | VOC_REF = 1V | 6 |
| OC_REF threshold | VOC_REF | 2.18 | 2.4 | 2.62 | V | VOC_REF = 2.4V | 6 |
| LSS OCP threshold | VLSS-OCP | 0.4 | 0.5 | 0.6 | V | 6 | |
| VREG output voltage | VREG | 9.5 | 11.5 | 13 | V | VIN = 5.5V - 60V | 7 |
| Bootstrap diode forward voltage | VFBOOT | 1 | V | ID = 10mA | 7 | ||
| Bootstrap diode forward voltage | VFBOOT | 1.4 | V | ID = 100mA | 7 | ||
| HS gate drive pull-down resistance | RHS-DN | 1 | 5 | Ω | VDS = 1V | 7 | |
| LS gate drive pull-down resistance | RLS-DN | 0.7 | 6.7 | Ω | VDS = 1V | 7 | |
| UVLO hysteresis | VIN_HYS | 200 | mV | 6 | |||
| VREG hysteresis | VREG_HYS | 0.65 | 1 | V | 6 | ||
| VREG start-up delay | tREG | 880 | µs | 6 | |||
| OCP deglitch time | tOC | 3 | µs | 6 | |||
| SLEEP wake-up time | tSLEEP | 1 | ms | 6 | |||
| LSS current limit fixed off time | tOFF | 70 | µs | 6 | |||
| LSS current limit HS minimum on time | tON | 1 | µs | 6 | |||
| Thermal shutdown | TTSD | 190 | °C | 6 | |||
| Thermal shutdown hysteresis | ΔTTSD | 30 | °C | Not tested in production | 6 | ||
| Internal pull-down resistance | RPD | 880 | kΩ | All logic inputs except nSLEEP | 6 | ||
| nSLEEP pull-down current | ISLEEP-PD | 1 | µA | 6 | |||
| Maximum source current | IOSO | 0.8 | A | Not tested in production | 7 | ||
| Maximum sink current | IOSI | 1 | A | Not tested in production | 7 | ||
| Gate drive pull-up resistance | RUP | 8 | Ω | VDS = 1V | 7 | ||
| LS automatic turn-on time | tLS | 2 | µs | At each commutation time | 7 | ||
| Charge pump frequency | fCP | 110 | kHz | 7 | |||
| Dead time | tDEAD | 700 | ns | RDT = 10kΩ | 7 | ||
| Dead time | tDEAD | 90 | ns | DT tied to GND | 7 | ||
| Dead time | tDEAD | 5.7 | µs | RDT = 100kΩ | 7 | ||
| Input voltage | VIN | -0.3 | 62 | V | 5 | ||
| CPA voltage | CPA | -0.3 | 55 | V | 5 | ||
| CPB voltage | CPB | -0.3 | 12.5 | V | 5 | ||
| VREG voltage | VREG | -0.3 | 13 | V | 5 | ||
| BST voltage | BSTA, BSTB, BSTC | -0.3 | 70 | V | 5 | ||
| GH voltage continuous | GHA, GHB, GHC | -0.3 | 70 | V | continuous | 5 | |
| GH voltage transient | GHA, GHB, GHC | -8 | 70 | V | transient, <2µs | 5 | |
| SH voltage continuous | SHA, SHB, SHC | -0.3 | 65 | V | continuous | 5 | |
| SH voltage transient | SHA, SHB, SHC | -8 | 65 | V | transient, <2µs | 5 | |
| GL voltage continuous | GLA, GLB, GLC | -0.3 | 13 | V | continuous | 5 | |
| GL voltage transient | GLA, GLB, GLC | -2 | 13 | V | transient, <2µs | 5 | |
| LSS voltage continuous | LSS | -0.3 | 1 | V | continuous | 5 | |
| LSS voltage transient | LSS | -2 | 2 | V | transient, <2µs | 5 | |
| All other pins to AGND | -0.3 | 6.5 | V | 5 | |||
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| ESD HBM | HBM | 1.8 | kV | Human body model | 5 | ||
| Recommended input voltage | VIN | 5 | 60 | V | 5 | ||
| Recommended OC_REF voltage | VOC_REF | 0.125 | 2.4 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Thermal resistance junction-ambient | θJA | 40 | °C/W | QFN-28 (4mmx5mm), JESD51-7 4-layer PCB | 5 | ||
| Thermal resistance junction-case | θJC | 9 | °C/W | QFN-28 (4mmx5mm), JESD51-7 4-layer PCB | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | and LS-FET source terminals with wide copper areas. | 18 |
CAD (KiCad official)
- Symbol:
MPQ6532GVE-AEC1-Z - Footprint:
Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: QFN-28(4x5) (KiCad packages3D, STEP)
- 3D model files:
mpq6532gve-aec1-z-etched.step/mpq6532gve-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq6532gve-aec1-z.step/mpq6532gve-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (22 pp, sha256
9490dd98fe4eddab, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MPQ6532GVE-AEC1-Z
**Monolithic Power Systems** · Motor Driver ICs · QFN-28(4x5)
MPQ6532GVE-AEC1-Z from Monolithic Power Systems, in a QFN-28(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage (5V to 60V operating) that must be bypassed to ground with a ceramic capacitor, with additional bulk capacitance possibly required. |
| 2 | CPA | passive | Charge pump capacitor terminal; connect a ceramic capacitor (0.47µF typical) between CPA and CPB. |
| 3 | CPB | passive | Charge pump capacitor connection terminal, paired with CPA. |
| 4 | VREG | power_out | Gate drive supply output (9.5V to 13V for VIN of 5.5V to 60V) that needs a ceramic capacitor to ground (10µF typical). |
| 5 | BSTA | passive | Bootstrap for phase A; connect a ceramic capacitor from this pin to SHA (0.1µF to 1µF recommended). |
| 6 | SHA | passive | High-side source connection for phase A. |
| 7 | GHA | output | High-side gate drive for phase A. |
| 8 | GLA | output | Low-side gate drive for phase A. |
| 9 | BSTB | passive | Bootstrap for phase B; connect a ceramic capacitor from this pin to SHB. |
| 10 | SHB | passive | High-side source connection for phase B. |
| 11 | GHB | output | High-side gate drive for phase B. |
| 12 | GLB | output | Low-side gate drive for phase B. |
| 13 | BSTC | passive | Bootstrap for phase C; connect a ceramic capacitor from this pin to SHC. |
| 14 | SHC | passive | High-side source connection for phase C. |
| 15 | GHC | output | High-side gate drive for phase C. |
| 16 | GLC | output | Low-side gate drive for phase C. |
| 17 | LSS | passive | Low-side source connection for the shunt resistor; OCP trips at VLSS-OCP of 0.4V to 0.6V (0.5V typical), or connect directly to ground if not needed. |
| 18 | HC | input | Hall-sensor input for phase C with an internal pull-down resistor. |
| 19 | HB | input | Hall-sensor input for phase B with an internal pull-down resistor. |
| 20 | HA | input | Hall-sensor input for phase A with an internal pull-down resistor. |
| 21 | nBRAKE | input | Brake input; pull active low to turn on all low-side MOSFETs and stop the motor, high for normal operation, with an internal pull-down resistor. |
| 22 | PWM | input | External PWM input; high drives the selected phase high and low drives it low, with an internal pull-down resistor. |
| 23 | DIR | input | Direction input; pull high or low to set the motor rotation direction. |
| 24 | nFAULT | output | Open-drain fault indication output that is pulled low when a fault condition occurs (VOL 0.5V max at 5mA). |
| 25 | nSLEEP | input | Sleep mode input; pull low for low-power sleep mode, high to enable the device, with an internal pull-down. |
| 26 | OC_REF | input | Over-current (short-circuit) protection reference voltage input, recommended range 0.125V to 2.4V. |
| 27 | DT | passive | Dead time setting; connect a resistor to ground to set the dead time (tDEAD(ns) = 60 x R(kΩ)). |
| 28 | GND | power_in | Ground. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-28(4x5) |
| Category | Power Supply Chip |
| Pins | 29 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VIN | 5 | | 60 | V | | 6 |
| Quiescent current | IQ | | 1.8 | 4 | mA | nSLEEP = 1, gate not switching | 6 |
| Sleep current | ISLEEP | | | 2.5 | µA | nSLEEP = 0 | 6 |
| Low input logic threshold | VIL | | | 0.8 | V | | 6 |
| High input logic threshold | VIH | 2 | | | V | | 6 |
| Input current logic high | IIN(H) | -20 | | 20 | µA | VIH = 5V | 6 |
| Input current logic low | IIN(L) | -20 | | 20 | µA | VIL = 0.8V | 6 |
| Fault low-voltage output | VOL | | | 0.5 | V | IOUT = 5mA | 6 |
| Fault high leakage current output | IOH | | | 1 | µA | VOUT = 3.3V | 6 |
| UVLO rising threshold | VIN_RISING | 3.2 | 3.9 | 5 | V | | 6 |
| VREG rising threshold | VREG_RISING | 6.8 | 7.6 | 8.4 | V | | 6 |
| OC_REF threshold | VOC_REF | 0.8 | 1 | 1.2 | V | VOC_REF = 1V | 6 |
| OC_REF threshold | VOC_REF | 2.18 | 2.4 | 2.62 | V | VOC_REF = 2.4V | 6 |
| LSS OCP threshold | VLSS-OCP | 0.4 | 0.5 | 0.6 | V | | 6 |
| VREG output voltage | VREG | 9.5 | 11.5 | 13 | V | VIN = 5.5V - 60V | 7 |
| Bootstrap diode forward voltage | VFBOOT | | | 1 | V | ID = 10mA | 7 |
| Bootstrap diode forward voltage | VFBOOT | | | 1.4 | V | ID = 100mA | 7 |
| HS gate drive pull-down resistance | RHS-DN | | 1 | 5 | Ω | VDS = 1V | 7 |
| LS gate drive pull-down resistance | RLS-DN | | 0.7 | 6.7 | Ω | VDS = 1V | 7 |
| UVLO hysteresis | VIN_HYS | | 200 | | mV | | 6 |
| VREG hysteresis | VREG_HYS | | 0.65 | 1 | V | | 6 |
| VREG start-up delay | tREG | | 880 | | µs | | 6 |
| OCP deglitch time | tOC | | 3 | | µs | | 6 |
| SLEEP wake-up time | tSLEEP | | 1 | | ms | | 6 |
| LSS current limit fixed off time | tOFF | | 70 | | µs | | 6 |
| LSS current limit HS minimum on time | tON | | 1 | | µs | | 6 |
| Thermal shutdown | TTSD | | 190 | | °C | | 6 |
| Thermal shutdown hysteresis | ΔTTSD | | 30 | | °C | Not tested in production | 6 |
| Internal pull-down resistance | RPD | | 880 | | kΩ | All logic inputs except nSLEEP | 6 |
| nSLEEP pull-down current | ISLEEP-PD | | 1 | | µA | | 6 |
| Maximum source current | IOSO | | 0.8 | | A | Not tested in production | 7 |
| Maximum sink current | IOSI | | 1 | | A | Not tested in production | 7 |
| Gate drive pull-up resistance | RUP | | 8 | | Ω | VDS = 1V | 7 |
| LS automatic turn-on time | tLS | | 2 | | µs | At each commutation time | 7 |
| Charge pump frequency | fCP | | 110 | | kHz | | 7 |
| Dead time | tDEAD | | 700 | | ns | RDT = 10kΩ | 7 |
| Dead time | tDEAD | | 90 | | ns | DT tied to GND | 7 |
| Dead time | tDEAD | | 5.7 | | µs | RDT = 100kΩ | 7 |
| Input voltage | VIN | -0.3 | | 62 | V | | 5 |
| CPA voltage | CPA | -0.3 | | 55 | V | | 5 |
| CPB voltage | CPB | -0.3 | | 12.5 | V | | 5 |
| VREG voltage | VREG | -0.3 | | 13 | V | | 5 |
| BST voltage | BSTA, BSTB, BSTC | -0.3 | | 70 | V | | 5 |
| GH voltage continuous | GHA, GHB, GHC | -0.3 | | 70 | V | continuous | 5 |
| GH voltage transient | GHA, GHB, GHC | -8 | | 70 | V | transient, <2µs | 5 |
| SH voltage continuous | SHA, SHB, SHC | -0.3 | | 65 | V | continuous | 5 |
| SH voltage transient | SHA, SHB, SHC | -8 | | 65 | V | transient, <2µs | 5 |
| GL voltage continuous | GLA, GLB, GLC | -0.3 | | 13 | V | continuous | 5 |
| GL voltage transient | GLA, GLB, GLC | -2 | | 13 | V | transient, <2µs | 5 |
| LSS voltage continuous | LSS | -0.3 | | 1 | V | continuous | 5 |
| LSS voltage transient | LSS | -2 | | 2 | V | transient, <2µs | 5 |
| All other pins to AGND | | -0.3 | | 6.5 | V | | 5 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| ESD HBM | HBM | | | 1.8 | kV | Human body model | 5 |
| Recommended input voltage | VIN | 5 | | 60 | V | | 5 |
| Recommended OC_REF voltage | VOC_REF | 0.125 | | 2.4 | V | | 5 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Thermal resistance junction-ambient | θJA | | 40 | | °C/W | QFN-28 (4mmx5mm), JESD51-7 4-layer PCB | 5 |
| Thermal resistance junction-case | θJC | | 9 | | °C/W | QFN-28 (4mmx5mm), JESD51-7 4-layer PCB | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | and LS-FET source terminals with wide copper areas. | 18 |
## CAD (KiCad official)
- Symbol: `MPQ6532GVE-AEC1-Z`
- Footprint: `Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm`
- 3D model: QFN-28(4x5) (KiCad packages3D, STEP)
- 3D model files: `mpq6532gve-aec1-z-etched.step` / `mpq6532gve-aec1-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mpq6532gve-aec1-z.step` / `mpq6532gve-aec1-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mpq6532gve-aec1-z-datasheet.pdf) (22 pp, sha256 `9490dd98fe4eddab`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mpq6532gve-aec1-z-datasheet.pdf)