main
Ray
Publish 0.1.0
206a7b6
MPQ4570GF-AEC1-Z
Monolithic Power Systems · DC-DC Converters · TSSOP-20-EP
MPQ4570GF-AEC1-Z from Monolithic Power Systems, in a TSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | passive | Compensation network setting pin; connect an external resistor in series with a capacitor between this pin and GND. |
| 2 | FB | input | Feedback input to the PWM comparator; connect an external resistive divider between the output and GND (VFB 1V typ). |
| 3 | FREQ | input | Switching frequency setting pin; connect a resistor to GND to set the frequency, or apply an external SYNC clock (100kHz to 1MHz) for the converter to follow. |
| 4 | EN | input | Enable input; pulling it below the threshold (1.3V falling, 1.6V rising typ) shuts the chip down, it has no internal pull-up or pull-down so do not float it. |
| 5 | BST | passive | Bootstrap positive supply for the internal floating high-side MOSFET driver; connect a capacitor between this pin and SW. |
| 6 | VIN | power_in | Input supply (4.5V to 55V) for all internal control circuitry and the VDD regulator; place a decoupling capacitor to ground close to the pin. |
| 7 | VIN | power_in | Input supply (4.5V to 55V) for all internal control circuitry and the VDD regulator; place a decoupling capacitor to ground close to the pin. |
| 8 | VIN | power_in | Input supply (4.5V to 55V) for all internal control circuitry and the VDD regulator; place a decoupling capacitor to ground close to the pin. |
| 9 | NC | unconnected | Not connected pin; float this pin in the application. |
| 10 | SW | power_out | Switch node, the output node from the internal high-side MOSFET source. |
| 11 | SW | power_out | Switch node, the output node from the internal high-side MOSFET source. |
| 12 | NC | unconnected | Not connected pin; float this pin in the application. |
| 13 | GND | power_in | Power ground pin for the internal power MOSFETs. |
| 14 | GND | power_in | Power ground pin for the internal power MOSFETs. |
| 15 | GND | power_in | Power ground pin for the internal power MOSFETs. |
| 16 | VDD | power_out | Internal regulator output (3.6V typ from VIN, 4.8V typ when BIAS is 5V) that powers the internal MOSFET driver and BST charging circuit; needs a 1µF decoupling capacitor. |
| 17 | BIAS | power_in | Connect to an external 5V source for better thermal performance so VDD and internal circuits are powered from BIAS; float or connect to GND if not used. |
| 18 | PG | output | Open-drain power good indication; connect a resistor to a pull-up power source if used. |
| 19 | SS | passive | Optional external soft-start time setting; connect a capacitor to GND, or float for the internal 0.5ms soft-start. |
| 20 | AGND | power_in | Ground for the internal logic and signal circuit. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSSOP-20-EP |
| Category | Power Management |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
MPQ4570GF-AEC1-Z - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: TSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mpq4570gf-aec1-z-etched.step/mpq4570gf-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq4570gf-aec1-z.step/mpq4570gf-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (22 pp, sha256
369a892b51791906, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MPQ4570GF-AEC1-Z
**Monolithic Power Systems** · DC-DC Converters · TSSOP-20-EP
MPQ4570GF-AEC1-Z from Monolithic Power Systems, in a TSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | passive | Compensation network setting pin; connect an external resistor in series with a capacitor between this pin and GND. |
| 2 | FB | input | Feedback input to the PWM comparator; connect an external resistive divider between the output and GND (VFB 1V typ). |
| 3 | FREQ | input | Switching frequency setting pin; connect a resistor to GND to set the frequency, or apply an external SYNC clock (100kHz to 1MHz) for the converter to follow. |
| 4 | EN | input | Enable input; pulling it below the threshold (1.3V falling, 1.6V rising typ) shuts the chip down, it has no internal pull-up or pull-down so do not float it. |
| 5 | BST | passive | Bootstrap positive supply for the internal floating high-side MOSFET driver; connect a capacitor between this pin and SW. |
| 6 | VIN | power_in | Input supply (4.5V to 55V) for all internal control circuitry and the VDD regulator; place a decoupling capacitor to ground close to the pin. |
| 7 | VIN | power_in | Input supply (4.5V to 55V) for all internal control circuitry and the VDD regulator; place a decoupling capacitor to ground close to the pin. |
| 8 | VIN | power_in | Input supply (4.5V to 55V) for all internal control circuitry and the VDD regulator; place a decoupling capacitor to ground close to the pin. |
| 9 | NC | unconnected | Not connected pin; float this pin in the application. |
| 10 | SW | power_out | Switch node, the output node from the internal high-side MOSFET source. |
| 11 | SW | power_out | Switch node, the output node from the internal high-side MOSFET source. |
| 12 | NC | unconnected | Not connected pin; float this pin in the application. |
| 13 | GND | power_in | Power ground pin for the internal power MOSFETs. |
| 14 | GND | power_in | Power ground pin for the internal power MOSFETs. |
| 15 | GND | power_in | Power ground pin for the internal power MOSFETs. |
| 16 | VDD | power_out | Internal regulator output (3.6V typ from VIN, 4.8V typ when BIAS is 5V) that powers the internal MOSFET driver and BST charging circuit; needs a 1µF decoupling capacitor. |
| 17 | BIAS | power_in | Connect to an external 5V source for better thermal performance so VDD and internal circuits are powered from BIAS; float or connect to GND if not used. |
| 18 | PG | output | Open-drain power good indication; connect a resistor to a pull-up power source if used. |
| 19 | SS | passive | Optional external soft-start time setting; connect a capacitor to GND, or float for the internal 0.5ms soft-start. |
| 20 | AGND | power_in | Ground for the internal logic and signal circuit. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSSOP-20-EP |
| Category | Power Management |
| Pins | 21 |
## CAD (KiCad official)
- Symbol: `MPQ4570GF-AEC1-Z`
- Footprint: `Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm`
- 3D model: TSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `mpq4570gf-aec1-z-etched.step` / `mpq4570gf-aec1-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mpq4570gf-aec1-z.step` / `mpq4570gf-aec1-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mpq4570gf-aec1-z-datasheet.pdf) (22 pp, sha256 `369a892b51791906`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mpq4570gf-aec1-z-datasheet.pdf)