main
Ray Set visibility: public 87194ed
{
  "schema_version": 1,
  "type": "component",
  "slug": "mpq4436agre-aec1-z",
  "title": "MPQ4436AGRE-AEC1-Z",
  "brief": "Monolithic Power Systems DC-DC Converters, QFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "mpq4436agre-aec1-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MPQ4436AGRE-AEC1-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "QFN-20(4x4)",
    "pin_count": 21,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/90d01e24338b15c186a340c2f9d0851c.pdf",
    "parts": {
      "symbol": "mpq4436agre-aec1-z.kicad_sym",
      "footprint": "mpq4436agre-aec1-z.kicad_mod",
      "model_3d": "mpq4436agre-aec1-z-hero.glb",
      "model_3d_plain": "mpq4436agre-aec1-z-etched.glb",
      "model_3d_step": "mpq4436agre-aec1-z-etched.step",
      "model_3d_step_plain": "mpq4436agre-aec1-z.step",
      "lbr": "mpq4436agre-aec1-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C3191990",
      "digikey": "1589-MPQ4436AGRE-AEC1-ZTR-ND",
      "mouser": "946-MP4436AGREAEC1Z"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:38:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1589-MPQ4436AGRE-AEC1-ZTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "946-MP4436AGREAEC1Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MODE",
        "type": "input",
        "description": "AAM or FCCM select pin: pull high to put the part in FCCM and pull low for AAM at light load, and do not leave it floating."
      },
      {
        "number": "2",
        "name": "SYNCIN",
        "type": "input",
        "description": "SYNC input that synchronizes the internal oscillator to an external 350kHz to 1000kHz clock; connect a 51kΩ resistor between SYNCIN and GND, connect to GND if not used, and do not float it."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply for the internal control circuitry and the power switch connected to SW, with a decoupling capacitor to ground recommended close to VIN."
      },
      {
        "number": "4",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "5",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "6",
        "name": "BST",
        "type": "power_out",
        "description": "Bootstrap positive power supply for the high-side MOSFET driver connected to SW, requiring a bypass capacitor between BST and SW sized per the application section."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "output",
        "description": "Switch node and output of the internal power switch."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Switch node and output of the internal power switch."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: pull below the 0.85V threshold to shut down the chip and pull above the 1V threshold to enable it."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "12",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply for the internal control circuitry and the power switch connected to SW, with a decoupling capacitor to ground recommended close to VIN."
      },
      {
        "number": "13",
        "name": "SYNCO",
        "type": "output",
        "description": "SYNC output providing a clock 180° out-of-phase with the internal oscillator or opposite to the SYNCIN clock; leave floating if not used."
      },
      {
        "number": "14",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power good output that goes high when the output is within 93% to 106% of nominal and low above 107.5% or below 91%, requiring a pull-up resistor to the power source if used."
      },
      {
        "number": "15",
        "name": "ICS",
        "type": "passive",
        "description": "Current sharing pin: connect in parallel ICs in multi-phase applications, and in single-phase applications connect to VCC or to VOUT that is at least 3V; do not float it."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_out",
        "description": "Bias supply powering the internal control circuit and gate drivers, requiring a decoupling capacitor to ground close to this pin."
      },
      {
        "number": "17",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "18",
        "name": "FB",
        "type": "input",
        "description": "Feedback input with a 0.815V feedback threshold voltage, connected to the center point of the output resistor divider to AGND and placed as close to FB as possible."
      },
      {
        "number": "19",
        "name": "SS",
        "type": "passive",
        "description": "Soft start input: a capacitor from SS to GND sets the soft-start period, with a 6µA source current charging it at start-up to limit inrush current."
      },
      {
        "number": "20",
        "name": "FREQ",
        "type": "input",
        "description": "Switching frequency program: a resistor from this pin to ground sets the switching frequency, following the fSW vs. RFREQ curve in the Typical Performance Characteristics section."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 9,
        "cost_usd": 0.0198,
        "at": "2026-10-28T16:38:40"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/90d01e24338b15c186a340c2f9d0851c.pdf",
        "pages": 38,
        "sha256": "71ef689792c1986b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mpq4436agre-aec1-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mpq4436agre-aec1-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "fec2c3edb70c90f5cf893a00ad3f817c8d5666cd3228359789d1e801204305fc",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Monolithic Power Systems",
      "Package": "QFN-20(4x4)",
      "Category": "Power Supply Chip",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mpq4436agre-aec1-z"
  ],
  "discovery_pitch": "MPQ4436AGRE-AEC1-Z (Monolithic Power Systems) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mpq4436agre-aec1-z.kicad_sym",
    "mpq4436agre-aec1-z.kicad_mod",
    "mpq4436agre-aec1-z.glb",
    "mpq4436agre-aec1-z.step",
    "mpq4436agre-aec1-z.lbr",
    "docs/hero.png",
    "docs/mpq4436agre-aec1-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mpq4436agre-aec1-z-hero.glb",
    "mpq4436agre-aec1-z-hero.overlay.json",
    "mpq4436agre-aec1-z-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}