Generated by kicad-footprint-generator · KiCad file format 20260206
MPQ3910AGK-AEC1-Z
Monolithic Power Systems · DC-DC Converters · MSOP-10
MPQ3910AGK-AEC1-Z from Monolithic Power Systems, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground pin that also serves as the gate driver return. |
| 2 | RT | passive | Switching frequency set pin; connect a resistor from RT to GND to set the switching frequency between 30kHz and 400kHz. |
| 3 | COMP | output | Error amplifier output; non-isolated (boost) use requires an RC compensation network, while isolated designs can drive the feedback signal directly into COMP. |
| 4 | FB | input | Feedback and OVP monitor input with an internal 1.26V reference for non-isolated solutions; for isolated solutions it monitors over-voltage protection (OVP). |
| 5 | EN/SYNC | input | On/off control input with an internal 1MΩ pull-down to GND; apply an external clock above the RT-set frequency (80kHz to 400kHz) to synchronize, and do not connect to a source above 6V without a pull-up resistor. |
| 6 | SS | passive | Soft-start pin; a capacitor from SS to GND sets the period over which COMP rises and also sets the hiccup protection delay. |
| 7 | ISENSE | input | Current sense and application mode set pin that senses the sense-resistor voltage for current-mode control, cycle-by-cycle current limit, OLP and SCP, and selects the feedback mode at start-up. |
| 8 | VIN | power_in | Input supply pin with a recommended range of 7V to 35V (5V to 13V if VIN and VCC are tied); connect a bypass capacitor from VIN to GND. |
| 9 | VCC | power_out | Internal 12V regulator output that must be bypassed with a minimum 1µF capacitor to GND. |
| 10 | GATE | output | Gate driver output for the external N-channel power MOSFET; VCC and GATE to GND are rated -0.3V to +15V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | MSOP-10 |
| Category | Power Management |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC UVLO threshold (rising edge) | VUVLO | 3.8 | 4.2 | 4.6 | V | Rising edge | 4 |
| VCC regulation voltage | VCC | 10.8 | 11.8 | 12.8 | V | VCC load = 0mA to 10mA | 4 |
| Quiescent current | IQ | 288 | 523 | μA | VFB = 1.5V | 4 | |
| Switching frequency | fSW | 300 | 337 | 374 | kHz | RT = 6.81kΩ | 4 |
| Switching frequency | fSW | 24 | 30 | 36 | kHz | RT = 80.6kΩ | 4 |
| Maximum duty cycle | DMAX | 92 | 95 | % | RT = 6.81kΩ | 4 | |
| ISENSE limit | VLIMIT | 145 | 185 | 215 | mV | TJ = 25°C | 4 |
| ISENSE bias current | ISENSE | 0.01 | 0.15 | μA | TJ = 25°C | 4 | |
| Minimum on time | tON-MIN | 214 | 400 | ns | 4 | ||
| Shutdown current | IS | 1 | μA | VEN = 0V | 4 | ||
| FB reference voltage | VFB | 1.216 | 1.237 | 1.258 | V | TJ = 25°C | 5 |
| FB reference voltage | VFB | 1.211 | 1.237 | 1.263 | V | TJ = -40°C to +125°C | 5 |
| FB bias current | IFB | 0.01 | 0.15 | μA | VFB = 1.237V, TJ = 25°C | 5 | |
| OVP reference level | VOVP | 1.39 | 1.44 | 1.49 | V | TJ = 25°C | 5 |
| OVP reference level | VOVP | 1.296 | 1.584 | V | TJ = -40°C to +125°C | 5 | |
| Enable rising threshold | VEN-RISING | 1.4 | 1.65 | 1.9 | V | 5 | |
| Enable input current | IEN | 2.5 | 5 | μA | VEN = 3V | 5 | |
| Supply voltage (VIN) | VIN | 7 | 35 | V | Recommended operating condition | 3 | |
| Supply voltage with VIN and VCC connected | VIN/VCC | 5 | 13 | V | VIN and VCC connected | 3 | |
| EN sink current | 0 | 0.4 | mA | See footnote 5 | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| VIN to GND | VIN | -0.3 | 40 | V | 3 | ||
| VCC, GATE to GND | VCC, GATE | -0.3 | 15 | V | 3 | ||
| All other pins | -0.3 | 6 | V | 3 | |||
| EN pin sink current | 0.5 | mA | See footnote 6 | 3 | |||
| Continuous power dissipation | PD | 0.83 | W | TA = 25°C | 3 | ||
| Maximum operating frequency | fSW | 500 | kHz | 3 | |||
| Storage temperature | TSTG | -55 | 150 | °C | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Thermal resistance junction-to-ambient, MSOP-10 | θJA | 150 | °C/W | JESD51-7, 4-layer PCB | 3 | ||
| Thermal resistance junction-to-case, MSOP-10 | θJC | 65 | °C/W | JESD51-7, 4-layer PCB | 3 | ||
| VCC UVLO hysteresis | VUVLO_HYS | 350 | mV | 4 | |||
| Gate driver impedance (sourcing) | 4.1 | Ω | IGATE = -20mA | 4 | |||
| Gate driver impedance (sinking) | 2 | Ω | IGATE = 20mA | 4 | |||
| Error amplifier transconductance | GEA | 0.62 | mA/V | VFB is ±50mV from FB threshold 1.26V, VCOMP = 1.5V | 4 | ||
| Maximum amplifier output current, source | 78 | μA | Source current | 4 | |||
| Maximum amplifier output current, sink | 70 | μA | Sink current | 4 | |||
| COMP high voltage | 2.4 | V | ISENSE = 0V, VFB = 1V | 4 | |||
| Current comparator leading edge blanking | tLEB | 214 | ns | 4 | |||
| SCP limit | VSCP | 350 | mV | 4 | |||
| Current-sense amplifier gain | GSENSE | 3.2 | V/V | ΔVCOMP / ΔVISENSE | 4 | ||
| Pulse-skip mode threshold | VCOMP | 0.95 | V | Skip mode | 4 | ||
| Soft start charge current | ISS | 54 | μA | 4 | |||
| Overload detection discharge current | 17.8 | μA | 4 | ||||
| Discharge current during protection | 1.66 | μA | 4 | ||||
| Charged threshold voltage | 3.65 | V | 4 | ||||
| Overload shutdown threshold voltage | 3.27 | V | 4 | ||||
| Protection reset threshold voltage | 0.2 | V | 4 | ||||
| Enable hysteresis | VEN-HYS | 540 | mV | 5 | |||
| Enable turn-off delay | tTD-OFF | 20 | μs | 5 | |||
| Thermal shutdown | TSD | 160 | °C | Guaranteed by engineering sample characterization (note 7) | 5 | ||
| Thermal hysteresis | 20 | °C | Guaranteed by engineering sample characterization (note 7) | 5 |
CAD (KiCad official)
- Symbol:
MPQ3910AGK-AEC1-Z - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
mpq3910agk-aec1-z-etched.step/mpq3910agk-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq3910agk-aec1-z.step/mpq3910agk-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (25 pp, sha256
15f317f9573e8462, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).