main
Ray Publish 0.1.0 ddb607c
{
  "slug": "mpq3364gr-aec1-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems LED Drivers, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "mpq3364gr-aec1-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mpq3364gr-aec1-z.kicad_sym",
    "mpq3364gr-aec1-z.kicad_mod",
    "mpq3364gr-aec1-z.glb",
    "mpq3364gr-aec1-z.step",
    "mpq3364gr-aec1-z.lbr",
    "docs/hero.png",
    "docs/mpq3364gr-aec1-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mpq3364gr-aec1-z-hero.glb",
    "mpq3364gr-aec1-z-hero.overlay.json",
    "mpq3364gr-aec1-z-etched.glb"
  ],
  "component": {
    "mpn": "MPQ3364GR-AEC1-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "QFN-24(4x4)",
    "pin_count": 25,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8ac00bfc95e3687dca1172a01fcb1807.pdf",
    "parts": {
      "symbol": "mpq3364gr-aec1-z.kicad_sym",
      "footprint": "mpq3364gr-aec1-z.kicad_mod",
      "model_3d": "mpq3364gr-aec1-z-hero.glb",
      "model_3d_plain": "mpq3364gr-aec1-z-etched.glb",
      "model_3d_step": "mpq3364gr-aec1-z-etched.step",
      "model_3d_step_plain": "mpq3364gr-aec1-z.step",
      "lbr": "mpq3364gr-aec1-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C3192025",
      "digikey": "1589-MPQ3364GR-AEC1-ZTR-ND",
      "mouser": "946-MPQ3364GR-AEC1-Z"
    },
    "distributor_check": {
      "checked_at": "2026-11-07T02:08:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1589-MPQ3364GR-AEC1-ZTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "946-MPQ3364GR-AEC1-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DIM",
        "type": "input",
        "description": "PWM signal input for brightness control, pulled low internally, with a 100Hz to 20kHz PWM signal recommended."
      },
      {
        "number": "2",
        "name": "MIX/AD",
        "type": "passive",
        "description": "Dimming mode setting pin with an 18uA current-source output where a resistor sets the voltage: <0.3V mix dimming, 0.5V to 0.8V PWM dimming, 1.0V to 1.3V analog dimming, floating selects the MODE register setting."
      },
      {
        "number": "3",
        "name": "FREQ/SYNC",
        "type": "input",
        "description": "Switching frequency setting pin using a resistor to GND or an external clock for synchronization, floated if the frequency is set by FSW1:0."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "IC enable pin, pulled high to enable the IC and low to shut it down."
      },
      {
        "number": "5",
        "name": "SCL/PSE",
        "type": "input",
        "description": "I2C clock input; connected to SDA/PSE and pulled up between 0.75V and 1V to enable phase shift PWM dimming, pulled to GND if unused and must not float."
      },
      {
        "number": "6",
        "name": "SDA/PSE",
        "type": "input",
        "description": "I2C data input; connected to SCL/PSE and pulled up between 0.75V and 1V to enable phase shift PWM dimming, pulled to GND if unused and must not float."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "passive",
        "description": "Compensation pin."
      },
      {
        "number": "8",
        "name": "FF",
        "type": "output",
        "description": "Fault flag pin that is open drain during normal operation and pulled low if a fault occurs."
      },
      {
        "number": "9",
        "name": "ISET",
        "type": "passive",
        "description": "LED current setting pin with a current-setting resistor from ISET to GND to configure the current in each LED string."
      },
      {
        "number": "10",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "11",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "12",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "13",
        "name": "LED4",
        "type": "input",
        "description": "LED string 4 current input, connected to the LED string 4 cathode."
      },
      {
        "number": "14",
        "name": "LED3",
        "type": "input",
        "description": "LED string 3 current input, connected to the LED string 3 cathode."
      },
      {
        "number": "15",
        "name": "LED2",
        "type": "input",
        "description": "LED string 2 current input, connected to the LED string 2 cathode."
      },
      {
        "number": "16",
        "name": "LED1",
        "type": "input",
        "description": "LED string 1 current input, connected to the LED string 1 cathode."
      },
      {
        "number": "17",
        "name": "PGND",
        "type": "power_in",
        "description": "Step-up converter power ground."
      },
      {
        "number": "18",
        "name": "SW",
        "type": "passive",
        "description": "Drain of the internal low-side MOSFET switch, connected to the power inductor."
      },
      {
        "number": "19",
        "name": "OVP",
        "type": "input",
        "description": "Over-voltage protection pin with a resistor divider from OVP to GND to set the over-voltage protection threshold."
      },
      {
        "number": "20",
        "name": "STH",
        "type": "passive",
        "description": "Short LED protection threshold setting pin with an 18uA current-source output where a resistor sets the voltage, floated if the threshold is set by TH_S1:0."
      },
      {
        "number": "21",
        "name": "ADR",
        "type": "passive",
        "description": "IC address setting pin using a resistor with an 18uA pull-up current: floating gives address 0x38, <0.4V gives 0x3A, 0.4V to 1.4V gives 0x39."
      },
      {
        "number": "22",
        "name": "VCC",
        "type": "power_out",
        "description": "5V LDO output powering the internal logic and gate driver, with a ceramic capacitor placed as close to the pin as possible."
      },
      {
        "number": "23",
        "name": "SD",
        "type": "output",
        "description": "Gate drive pin for the external disconnect P-channel MOSFET, turning it off if a fault occurs and floated if unused."
      },
      {
        "number": "24",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input that supplies power to the IC."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exposed pad has no printed number; assigned '25' as a convention. Pin types for COMP, SDA/PSE, SD, a"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0763,
        "at": "2026-11-07T02:08:20"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/8ac00bfc95e3687dca1172a01fcb1807.pdf",
        "pages": 27,
        "sha256": "48716a936f3f0568",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mpq3364gr-aec1-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mpq3364gr-aec1-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0acf06b3a014286200e55d4646b7b55df0738c4ec2c34c8de189276a979bc4f9",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}