Generated by kicad-footprint-generator · KiCad file format 20260206
MPQ3326GR-AEC1-Z
Monolithic Power Systems · LED Drivers · QFN-24(4x4)
MPQ3326GR-AEC1-Z from Monolithic Power Systems, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RFSH/FLT | bidirectional | Refresh signal output when FLTEN = 0 (frequency set by FRFSH register), or active-low open-drain fault flag pulled low on a fault when FLTEN = 1. |
| 2 | EN | input | Enable control; pull low to disable the IC and high to enable it. |
| 3 | SCL | input | I2C interface clock input. |
| 4 | SDA | bidirectional | I2C interface data pin. |
| 5 | ADDR | input | I2C address setting by a resistor from ADDR to GND, setting the 4 LSB of the I2C address with 10 configurable addresses. |
| 6 | ISET | passive | LED current setting; tie a current-setting resistor from this pin to ground to configure the current in each LED string. |
| 7 | LED1 | passive | LED channel 1 current input; connect the LED channel 1 cathode to this pin. |
| 8 | LED2 | passive | LED channel 2 current input; connect the LED channel 2 cathode to this pin. |
| 9 | LED3 | passive | LED channel 3 current input; connect the LED channel 3 cathode to this pin. |
| 10 | LED4 | passive | LED channel 4 current input; connect the LED channel 4 cathode to this pin. |
| 11 | LED5 | passive | LED channel 5 current input; connect the LED channel 5 cathode to this pin. |
| 12 | LED6 | passive | LED channel 6 current input; connect the LED channel 6 cathode to this pin. |
| 13 | LED7 | passive | LED channel 7 current input; connect the LED channel 7 cathode to this pin. |
| 14 | GND | power_in | Ground. |
| 15 | LED8 | passive | LED channel 8 current input; connect the LED channel 8 cathode to this pin. |
| 16 | LED9 | passive | LED channel 9 current input; connect the LED channel 9 cathode to this pin. |
| 17 | LED10 | passive | LED channel 10 current input; connect the LED channel 10 cathode to this pin. |
| 18 | LED11 | passive | LED channel 11 current input; connect the LED channel 11 cathode to this pin. |
| 19 | LED12 | passive | LED channel 12 current input; connect the LED channel 12 cathode to this pin. |
| 20 | LED13 | passive | LED channel 13 current input; connect the LED channel 13 cathode to this pin. |
| 21 | LED14 | passive | LED channel 14 current input; connect the LED channel 14 cathode to this pin. |
| 22 | LED15 | passive | LED channel 15 current input; connect the LED channel 15 cathode to this pin. |
| 23 | LED16 | passive | LED channel 16 current input; connect the LED channel 16 cathode to this pin. |
| 24 | VIN | power_in | Power supply input (4V to 16V recommended); supplies the IC and must be locally bypassed. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-24(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 4 | 16 | V | 6 | ||
| Input UVLO threshold rising | VIN_UVLO | 3.45 | 3.7 | 3.95 | V | Rising edge | 6 |
| Input UVLO threshold falling | VIN_UVLO | 3.15 | 3.5 | 3.85 | V | Falling edge | 6 |
| RFSH/FLT output frequency | fRFSH | 285 | 300 | 315 | Hz | FRFSH9:0 = 0x1A9, FPWM2:0 = 01 | 6 |
| ISET voltage | VISET | 1.174 | 1.2 | 1.226 | V | TJ = 25°C | 6 |
| LED current | ILED | -3 | 25 | 3 | mA | RISET = 20kΩ, ICHx5:0 = 0x3F (tolerance in %) | 6 |
| LED current at 25°C | ILED | -2 | 25 | 2 | mA | RISET = 20kΩ, TJ = 25°C, ICHx5:0 = 0x3F (tolerance in %) | 6 |
| PWM frequency | fPWM | 230 | 245 | 260 | Hz | 6 | |
| Short LED string protection threshold | VSLP | 2.75 | 3 | 3.25 | V | STH1:0 = 01 | 6 |
| Open LED string protection threshold | VLED_UV | 100 | 160 | mV | 6 | ||
| Supply current (quiescent) | IQ | 4 | mA | 6 | |||
| Supply current (shutdown) | IST | 2 | μA | VEN = 0V, VIN = 16V | 6 | ||
| Current sink headroom | VLEDX | 150 | 210 | mV | ILED = 20mA | 6 | |
| Input logic low | VIL | 0 | 0.4 | V | 7 | ||
| Input logic high | VIH | 1.3 | V | 7 | |||
| Output logic low | VOL | 0.4 | V | ILOAD = 3mA | 7 | ||
| SCL clock frequency | fSCL | 10 | 1000 | kHz | 7 | ||
| Clock low timeout | tTIMEOUT | 25 | 35 | ms | 7 | ||
| Supply voltage (recommended) | VIN | 4 | 16 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| VIN absolute maximum | VIN | -0.3 | 18 | V | 5 | ||
| LED1 to LED16 voltage | VLED1-16 | -0.5 | 18 | V | 5 | ||
| All other pins | -0.3 | 5 | V | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | -65 | 150 | °C | 5 | |||
| Lead temperature | 260 | °C | 5 | ||||
| Continuous power dissipation | PD | 2.97 | W | TA = 25°C, QFN-24 (4mmx4mm) | 5 | ||
| Thermal resistance junction-case | θJC | 9 | °C/W | QFN-24 (4mmx4mm), JESD51-7 4-layer PCB | 5 | ||
| Thermal shutdown threshold | TST | 170 | ℃ | 7 | |||
| Thermal shutdown hysteresis | TST_HYS | 20 | ℃ | 7 |
CAD (KiCad official)
- Symbol:
MPQ3326GR-AEC1-Z - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
mpq3326gr-aec1-z-etched.step/mpq3326gr-aec1-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq3326gr-aec1-z.step/mpq3326gr-aec1-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (38 pp, sha256
f7c5fee43170d66d, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).