main
Ray Publish 0.1.0 7d49ea4

MPQ2451DJ-AEC1-LF-Z

Monolithic Power Systems · DC-DC Converters · TSOT-23-6

MPQ2451DJ-AEC1-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST power_out Bootstrap pin that supplies the internal floating high-side MOSFET driver and needs a bypass capacitor connected between it and SW.
2 GND power_in Ground pin, where the output capacitor should be connected as close as possible while avoiding routing near high-current switch paths.
3 FB input Feedback input to the error amplifier, connected to an external divider between output and GND and compared against the internal 0.8V reference.
4 EN input Enable input that shuts the chip down when pulled below the specified threshold and enables it when pulled above; floating it disables the chip.
5 VIN power_in Input supply pin for all internal control circuitry and the high-side switch, requiring a decoupling capacitor to ground close to the pin; the operating range is 3.3V to 36V.
6 SW output Switch node output of the high-side switch, requiring a low VF Schottky diode to ground close to the pin to reduce switching spikes.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 0.774 0.794 0.814 V 4.0V < VIN < 36V 7
Feedback Voltage VFB 0.766 0.794 0.822 V 3.3V < VIN < 4.0V 7
Oscillator Frequency fSW 1.4 2 2.6 MHz 7
Shutdown Supply Current IS 3 30 μA VEN < 0.3V 7
Quiescent Supply Current IQ 130 200 µA No load, VFB=0.9, no switching 7
Enable High Threshold VIH 1.35 1.5 1.8 V Low-to-High 7
Feedback Bias Current 0.05 1 μA 7
Upper Switch Leakage Current 0.5 2 μA VEN = 0V, VSW = 0V 7
Current Limit ILIM 0.65 1 A 7
VIN UVLO Up Threshold 2.7 3.29 V 7
Soft-Start Time 0.5 1 ms FB from 0 to 0.794V 7
Upper Switch On Resistance RDS(ON) 500 mΩ VBST-VSW=5V, TJ= 25°C 7
COMP to Current Sense Transconductance GCS 3 A/V 7
VIN UVLO Hysteresis 0.4 V 7
Minimum Switch On Time tON 100 ns 7
Thermal Shutdown 150 °C 7
Enable Threshold Hysteresis 400 mV 7
Supply Voltage VIN VIN 3.3 36 V 6
Output Voltage VOUT VOUT 0.8 V max 0.9·VIN 6
Maximum Junction Temperature TJ 125 °C 6
Supply Voltage (VIN) VIN -0.3 40 V 6
Switch Voltage VSW -0.3 V max VIN+0.3V 6
BST to SW -0.3 5 V 6
All Other Pins -0.3 5 V 6
Continuous Power Dissipation PD 0.57 W TSOT23-6L, TA = 25°C 6
Junction Temperature TJ 150 °C 6
Lead Temperature 260 °C 6
Storage Temperature TSTORE -65 150 °C 6
Thermal Resistance Junction-to-Ambient θJA 220 °C/W TSOT23-6L, JESD51-7 4-layer PCB 6
Thermal Resistance Junction-to-Case θJC 110 °C/W TSOT23-6L, JESD51-7 4-layer PCB 6

CAD (KiCad official)

  • Symbol: MPQ2451DJ-AEC1-LF-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mpq2451dj-aec1-lf-z-etched.step / mpq2451dj-aec1-lf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq2451dj-aec1-lf-z.step / mpq2451dj-aec1-lf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (23 pp, sha256 58784441474587a2, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF