component
MPQ2315GJ-Z
Public Made by Adomby adom
Monolithic Power Systems DC-DC Converters, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MPQ2315GJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MPQ2315GJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AAM | input | A resistor from the AAM pin to ground sets the AAM voltage that forces non-synchronous mode at small load, and driving AAM high (=VCC) forces CCM. |
| 2 | IN | power_in | Supply voltage input; the MPQ2315 operates from a +4.5V to +24V input rail and requires C1 decoupling with a wide PCB trace. |
| 3 | SW | power_out | Switch output node that must be connected with a wide PCB trace. |
| 4 | GND | power_in | System ground and reference for the regulated output voltage, to be connected to GND with copper and vias per the layout care stated. |
| 5 | BST | passive | Bootstrap pin; a capacitor and a 20Ω resistor connected between SW and BST are required to form a floating supply for the high-side switch driver. |
| 6 | EN/SYNC | input | Enable input where EN=1 enables the MPQ2315, and an external clock applied here changes switching frequency over 200kHz to 2MHz with logic high above 2V. |
| 7 | VCC | power_out | Internal 5V bias supply; decouple with 0.1μF to 0.22μF, with capacitance no more than 0.22μF. |
| 8 | FB | input | Feedback input where the external resistor divider from the output taps in; the frequency fold-back comparator lowers the oscillator frequency when FB is below 400mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MPQ2315GJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mpq2315gj-z-etched.step/mpq2315gj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq2315gj-z.step/mpq2315gj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (21 pp, sha256
a99429993ba6cf76, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MPQ2315GJ-Z
**Monolithic Power Systems** · DC-DC Converters · TSOT-23-8
MPQ2315GJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AAM | input | A resistor from the AAM pin to ground sets the AAM voltage that forces non-synchronous mode at small load, and driving AAM high (=VCC) forces CCM. |
| 2 | IN | power_in | Supply voltage input; the MPQ2315 operates from a +4.5V to +24V input rail and requires C1 decoupling with a wide PCB trace. |
| 3 | SW | power_out | Switch output node that must be connected with a wide PCB trace. |
| 4 | GND | power_in | System ground and reference for the regulated output voltage, to be connected to GND with copper and vias per the layout care stated. |
| 5 | BST | passive | Bootstrap pin; a capacitor and a 20Ω resistor connected between SW and BST are required to form a floating supply for the high-side switch driver. |
| 6 | EN/SYNC | input | Enable input where EN=1 enables the MPQ2315, and an external clock applied here changes switching frequency over 200kHz to 2MHz with logic high above 2V. |
| 7 | VCC | power_out | Internal 5V bias supply; decouple with 0.1μF to 0.22μF, with capacitance no more than 0.22μF. |
| 8 | FB | input | Feedback input where the external resistor divider from the output taps in; the frequency fold-back comparator lowers the oscillator frequency when FB is below 400mV. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `MPQ2315GJ-Z`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `mpq2315gj-z-etched.step` / `mpq2315gj-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mpq2315gj-z.step` / `mpq2315gj-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mpq2315gj-z-datasheet.pdf) (21 pp, sha256 `a99429993ba6cf76`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mpq2315gj-z-datasheet.pdf)