MPQ2029GN-AEC1-Z

{
  "slug": "mpq2029gn-aec1-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "mpq2029gn-aec1-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mpq2029gn-aec1-z.kicad_sym",
    "mpq2029gn-aec1-z.kicad_mod",
    "mpq2029gn-aec1-z.glb",
    "mpq2029gn-aec1-z.step",
    "mpq2029gn-aec1-z.lbr",
    "docs/hero.png",
    "docs/mpq2029gn-aec1-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mpq2029gn-aec1-z-hero.glb",
    "mpq2029gn-aec1-z-hero.overlay.json",
    "mpq2029gn-aec1-z-etched.glb"
  ],
  "component": {
    "mpn": "MPQ2029GN-AEC1-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756164063535603712",
    "parts": {
      "symbol": "mpq2029gn-aec1-z.kicad_sym",
      "footprint": "mpq2029gn-aec1-z.kicad_mod",
      "model_3d": "mpq2029gn-aec1-z-hero.glb",
      "model_3d_plain": "mpq2029gn-aec1-z-etched.glb",
      "model_3d_step": "mpq2029gn-aec1-z-etched.step",
      "model_3d_step_plain": "mpq2029gn-aec1-z.step",
      "lbr": "mpq2029gn-aec1-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C3743325"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T07:37:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage, adjustable from 1.25V to 15V, and requires a low-value ceramic output capacitor (≥0.47µF) for stability."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; connect the exposed pad and GND to the same ground plane."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "power_in",
        "description": "Input voltage; connect a 3V to 40V supply to IN."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Regulator on/off control: pull below 0.3V to shut the IC down and above 1.8V to start it up, and connect to IN for automatic start-up."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Power-good output; the datasheet gives only its electrical limits, with a rising threshold of 89% to 97% of VFB, a low-level output of 0.4V max when sinking 1mA, and 1µA maximum leakage at VPG = 5V."
      },
      {
        "number": "7",
        "name": "PGDL",
        "type": "passive",
        "description": "Programmable power-good delay pin, where an external capacitor (47nF example) sets the delay with a 3µA to 9µA charging current at VPGDL = 1V and rising/falling thresholds of 1.4V to 2V and 0.2V to 0.7V."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Feedback input for the adjustable output, regulated to 1.25V nominal, and used with an external resistor divider to set VOUT."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not state the electrical type of PG or PGDL. PG is typed as output from its sink ; The pin function table only says 'Power good.' The PG description is built from the electrical chara; The package reference drawing text is garbled in the extraction, so pin numbers were taken from the ",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0563,
        "at": "2026-10-18T07:36:25"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756164063535603712",
        "pages": 15,
        "sha256": "4e0085947afc485c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mpq2029gn-aec1-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mpq2029gn-aec1-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fc6b143363ad6f71826fd45dd5c6cc2adfe636648fb8a2b73534a3742780bcfd",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}