main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mpq2019gn-33-z: viewers · Ray
mpq2019gn-33-z-etched.glb Publish 0.1.0 · Ray
mpq2019gn-33-z-etched.step mpq2019gn-33-z: factory component page (tier=lcsc) · Ray
mpq2019gn-33-z-hero.glb mpq2019gn-33-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mpq2019gn-33-z-hero.overlay.json Publish 0.1.0 · Ray
mpq2019gn-33-z.glb Publish 0.1.0 · Ray
mpq2019gn-33-z.kicad_mod Publish 0.1.0 · Ray
mpq2019gn-33-z.kicad_sym Publish 0.1.0 · Ray
mpq2019gn-33-z.lbr Publish 0.1.0 · Ray
mpq2019gn-33-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

MPQ2019GN-33-Z

Monolithic Power Systems · Linear Voltage Regulators (LDO) · SOIC-8-EP

MPQ2019GN-33-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage; only a low-value ceramic capacitor (≥ 0.47µF) on the output is required for stability.
2 NC unconnected No connection.
3 GND power_in Ground; connect the exposed pad and GND to the same ground plane.
4 IN power_in Input voltage; connect a 3V to 40V supply to IN (absolute maximum IN is -0.3V to +42V).
5 EN input Regulator on/off control input; logic low (below 0.3V) shuts down the IC and logic high (above 1.8V) starts it up, and EN can be connected to IN for automatic start-up.
6 PG output Power good open-drain output; it should be pulled up to VOUT or an external source (<15V) through a resistor, and if not used it can be left floating.
7 PGDL passive Programmable power-good delay time pin, where a capacitor sets the PG delay time (CPGDL = 47nF gives 5 to 15 ms); if not used it can be left floating.
8 FB input Feedback input for the output-adjustable version; FB is regulated to 1.25V nominally and is used to set the output voltage through an external resistor divider.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-8-EP
Category Power Management
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VIN 3 40 V 3
Output Voltage VOUT 1.25 15 V 3
Operating Temperature TA -40 125 °C TA≤TJ≤+150°C 3
IN, EN voltage (absolute maximum) -0.3 42 V 3
OUT voltage (absolute maximum) -0.3 17 V 3
PG voltage (absolute maximum) -0.3 15 V 3
PGDL, FB voltage (absolute maximum) -0.3 6 V 3
Junction Temperature (absolute maximum) 150 C 3
Lead Temperature (absolute maximum) 260 C 3
Storage Temperature -65 150 C 3
ESD HBM (Human Body Model) 4 kV 3
ESD MM (Machine Model) 200 V 3
GND Current IGND 12 16 µA 0<ILOAD<1mA 4
GND Current IGND 16 22 µA 1mA<ILOAD<30mA 4
GND Current IGND 65 95 µA 30mA<ILOAD<300mA 4
Shutdown Supply Current IS 1 µA VEN =0V 4
Load-Current Limit ILIMIT 600 1000 1350 mA VIN=7V, VOUT = 0V, TA = +25°C 4
Output Voltage Accuracy (MPQ2019GN-33) 3.2 3.3 3.4 V ILOAD=5mA 4
Dropout Voltage (MPQ2019GN-33) VDROPOUT 230 430 mV VOUT=3.3V, ILOAD = 150mA 4
Dropout Voltage (MPQ2019GN-33) VDROPOUT 480 640 mV TA = +25°C, VOUT=3.3V, ILOAD = 300mA 4
Line Regulation (MPQ2019GN-33) -10 1 10 mV VIN = 5V to 40V, ILOAD = 5mA, VOUT = 3.3V 4
Load Regulation (MPQ2019GN-33) 1 15 mV ILOAD = 5mA to 300mA, VOUT = 3.3V, TA = +25°C 5
Start-Up Response Time (MPQ2019GN-33) 0.5 1 ms RLOAD=500Ω, VOUT=3.3V, COUT=22µF, VOUT from 10% to 90% 5
EN Threshold Voltage, low VIL 0.3 V 5
EN Threshold Voltage, high VIH 1.8 V 5
EN Input Current 0.1 0.5 µA EN = 0V or 15V 5
PG Rising Threshold (MPQ2019GN-33) 88 92 96 %VFB 5
PG Low Voltage 0.1 0.4 V Sink 1mA Current 5
PG Leakage Current 1 µA VPG=5V 5
PGDL Charging Current 3 5.5 9 µA VPGDL=1V 5
PGDL Rising Threshold 1.4 1.7 2 V 5
PGDL Falling Threshold 0.2 0.4 0.7 V 5
PG Delay Time 5 10 15 ms CPGDL=47nF 5
PG Reaction Time 0.5 2 µs CPGDL=47nF 5
Thermal Resistance, junction-to-ambient, SOIC-8 EP θJA 50 C/W Note 5: JESD51-7, 4-layer PCB 3
Thermal Resistance, junction-to-case, SOIC-8 EP θJC 10 C/W Note 5: JESD51-7, 4-layer PCB 3
Thermal Shutdown TSD 165 C 5
Thermal Shutdown Hysteresis ΔTSD 30 C 5
PG Rising Threshold Hysteresis 5 %VFB 5

CAD (KiCad official)

  • Symbol: MPQ2019GN-33-Z
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: mpq2019gn-33-z-etched.step / mpq2019gn-33-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq2019gn-33-z.step / mpq2019gn-33-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (16 pp, sha256 f44bb2fb5f1e768b, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF