← Commit history
README.md+71−71
@@ -2,40 +2,40 @@  **MONOLITHIC POWER SYSTEMS (MPS)** · Global Sourcing Parts · QFN-28(4x5) -MP8008GV-Z from MONOLITHIC POWER SYSTEMS (MPS), in a QFN-28(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.+MP8008GV-Z from MONOLITHIC POWER SYSTEMS (MPS), in a QFN-28(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | AUX | input | Auxiliary power input detector; driving VDD - AUX above 2.3V disables the hot-swap MOSFET and CLASS functions and forces T2P and PG active. |-| 2 | DET | passive | Detection pin; connect a 24.9kΩ resistor between VDD and DET for PoE detection. |-| 3 | VDD | power_in | Positive power supply terminal from the PoE input power rail. |-| 4 | NC | unconnected | Not connected internally; connect NC to GND during layout. |-| 5 | PG | output | PD supply power good indicator pulled up by an internal current source when the PD output cap is fully charged; connect to EN/SYNC for flyback automatic start-up. |-| 6 | GATE | output | Gate driving signal that drives the external N-channel power MOSFET. |-| 7 | VCC | power_out | Flyback controller internal 12V regulator output powered through an internal LDO from VIN; connect a capacitor between VCC and GND. |-| 8 | VIN | power_in | Flyback controller input supply (7V to 35V recommended); connect a bypass capacitor from VIN to GND. |-| 9 | GND | power_in | Power ground and gate driver return pin; must be connected to RTN. |-| 10 | RT | passive | Switching frequency set; connect a resistor from RT to GND to set the frequency (30kHz to 400kHz). |-| 11 | COMP | output | Error amplifier output pin for feedback of the isolated flyback. |-| 12 | FB | input | Feedback and OVP monitor pin for non-isolated solutions; connect FB to GND if not used in isolated flyback. |-| 13 | EN/SYNC | input | On/off control input with internal 1MΩ resistor to GND; an external clock higher than the RT set frequency synchronizes the switching frequency. |-| 14 | NC | unconnected | Not connected internally; connect NC to GND during layout. |-| 15 | NC | unconnected | Not connected internally; connect NC to GND during layout. |-| 16 | NC | unconnected | Not connected internally; connect NC to GND during layout. |-| 17 | NC | unconnected | Not connected internally; connect NC to GND during layout. |-| 18 | SS | passive | Soft start; a capacitor between SS and GND sets both the soft-start time and hiccup protection delay. |-| 19 | ISENSE | input | Current sense and isolated/non-isolated mode setting pin; senses voltage across the sense resistor for current mode control, cycle-by-cycle limit, overload and short-circuit protection. |-| 20 | RTN | passive | Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN. |-| 21 | RTN | passive | Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN. |-| 22 | NC | unconnected | Not connected internally; connect NC to GND during layout. |-| 23 | VSS | power_in | Negative power supply terminal from the PoE input power rail. |-| 24 | VSS | power_in | Negative power supply terminal from the PoE input power rail. |-| 25 | FTY | input | Factory use only; FTY must be connected to VSS in application. |-| 26 | CLASS | passive | Classification pin; connect a resistor from CLASS to VSS to program the classification current. |-| 27 | T2P | output | Open-drain Type-2 PSE indicator; pulled low to VSS indicates a Type-2 PSE or a wall adapter is present. |-| 28 | NC | unconnected | Not connected internally; connect NC to GND during layout. |+| 1 | AUX | input | Auxiliary power input detector: driving VDD - AUX above 2.3V disables the hot-swap MOSFET and CLASS functions and forces T2P and PG active. |+| 2 | DET | passive | Detection pin: connect a 24.9kΩ (±1%) resistor between VDD and DET for the PoE detection signature, with a valid signature resistance of 23.7kΩ to 26.3kΩ. |+| 3 | VDD | power_in | Positive power supply terminal from the PoE input power rail, with a recommended supply voltage of 0V to 57V and an absolute maximum of -0.3V to +100V. |+| 4 | NC | unconnected | Not connected internally; connect to GND during layout. |+| 5 | PG | output | PD supply power good indicator, pulled up by an internal current source when the PD output capacitor is fully charged; connect to EN/SYNC for flyback automatic start-up, with a recommended PG sink current of no more than 0.6mA. |+| 6 | GATE | output | Gate driving signal that drives the external N-channel power MOSFET, with a sourcing impedance of 4.1Ω and a sinking impedance of 2Ω. |+| 7 | VCC | power_out | Flyback controller internal 12V regulator output, supplied through an internal LDO from VIN, which must be bypassed with a capacitor of no less than 1µF. |+| 8 | VIN | power_in | Flyback controller input supply, operating from 7V to 35V, with a bypass capacitor connected from VIN to GND. |+| 9 | GND | power_in | Power ground and gate driver return; GND must be connected to RTN and the exposed pad must be connected to GND. |+| 10 | RT | passive | Switching frequency set: a resistor from RT to GND sets the switching frequency between 30kHz and 400kHz. |+| 11 | COMP | bidirectional | Feedback input for isolated flyback and error amplifier output for non-isolated solutions, which requires an R-C compensation network in non-isolated mode. |+| 12 | FB | input | Feedback and OVP monitor for non-isolated flyback, with an OVP reference of 1.438V typical; connect to GND if not used in isolated flyback. |+| 13 | EN/SYNC | input | On/off control input with an internal 1MΩ pull-down to GND and an enable rising threshold of 1.628V typical, which can also accept an external clock above the RT-set frequency for synchronization; external pull-up current must be limited to 0.4mA. |+| 14 | NC | unconnected | Not connected internally; connect to GND during layout. |+| 15 | NC | unconnected | Not connected internally; connect to GND during layout. |+| 16 | NC | unconnected | Not connected internally; connect to GND during layout. |+| 17 | NC | unconnected | Not connected internally; connect to GND during layout. |+| 18 | SS | passive | Soft-start pin: a capacitor from SS to GND sets the soft-start time and hiccup protection delay, with the SS voltage clamped at 3.65V during normal operation. |+| 19 | ISENSE | input | Current sense and feedback mode setting pin that senses the sense resistor voltage for cycle-by-cycle current limit, with an ISENSE current limit threshold of 185mV typical. |+| 20 | RTN | passive | Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN, with an RTN on-resistance of 0.48Ω typical at 600mA. |+| 21 | RTN | passive | Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN, with an RTN on-resistance of 0.48Ω typical at 600mA. |+| 22 | NC | unconnected | Not connected internally; connect to GND during layout. |+| 23 | VSS | power_in | Negative power supply terminal from the PoE input power rail, which serves as the reference for VDD, DET, CLASS, T2P and RTN voltages. |+| 24 | VSS | power_in | Negative power supply terminal from the PoE input power rail, which serves as the reference for VDD, DET, CLASS, T2P and RTN voltages. |+| 25 | FTY | passive | Factory use only; FTY must be connected to VSS in application. |+| 26 | CLASS | passive | Classification pin: connect a resistor from CLASS to VSS to program the classification current, with a typical CLASS voltage of 1.16V in the classification range. |+| 27 | T2P | output | Type-2 PSE indicator, an active-low open-drain output that indicates a Type-2 PSE or wall adapter presence, with a maximum sink current of 5mA referenced to VSS. |+| 28 | NC | unconnected | Not connected internally; connect to GND during layout. | | 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |  ## Key specifications@@ -53,77 +53,77 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VDET leakage current | VDET-LK |  | 0.1 | 5 | μA | VDET = VDD = 57V, measure IDET | 4 |-| Detection current | IDET | 96 | 99 | 102 | μA | VDD = 2.5V, measure ISUPPLY | 4 |-| Detection current | IDET | 395 | 410 | 425 | μA | VDD = 10.1V, measure ISUPPLY | 4 |+| Voltage on VDD, RTN, DET, T2P, AUX, GND (to VSS) |  | -0.3 |  | 100 | V | Pins voltages with respect to VSS | 3 |+| Voltage on CLASS, FTY (to VSS) |  | -0.3 |  | 6.5 | V | Pins voltages with respect to VSS | 3 |+| Voltage on VDD (to GND) |  | -0.3 |  | 100 | V | Pins voltages with respect to GND | 3 |+| Voltage on VIN (to GND) |  | -0.3 |  | 40 | V | Pins voltages with respect to GND | 3 |+| Voltage on VCC, GATE (to GND) |  | -0.3 |  | 15 | V | Pins voltages with respect to GND | 3 |+| Voltage on all other pins (to GND) |  | -0.3 |  | 6 | V | Pins voltages with respect to GND | 3 |+| Voltage on AUX (to VDD) |  | -6.5 |  | 0.3 | V | Pins voltage with respect to VDD | 3 |+| T2P sink current |  |  |  | 10 | mA |  | 3 |+| AUX sink current |  | -5 |  |  | mA | See note 3 | 3 |+| PG sink current |  |  |  | 1 | mA | See note 4 | 3 |+| EN/SYNC sink current |  |  |  | 0.5 | mA | See note 5 | 3 |+| Junction temperature |  |  |  | 150 | °C |  | 3 |+| Storage temperature |  | -55 |  | 150 | °C |  | 3 |+| Supply voltage (VDD) | VDD | 0 |  | 57 | V |  | 3 |+| VIN voltage | VIN | 7 |  | 35 | V |  | 3 |+| Maximum T2P sink current |  |  |  | 5 | mA |  | 3 |+| Maximum AUX sink current |  |  |  | -3 | mA | See note 3 | 3 |+| Maximum PG sink current |  |  |  | 0.6 | mA | See note 4 | 3 |+| Maximum EN/SYNC sink current |  |  |  | 0.4 | mA | See note 5 | 3 |+| Operating junction temp. (TJ) | TJ | -40 |  | 125 | °C |  | 3 |+| DET leakage current | VDET-LK |  | 0.1 | 5 | μA | VDET = VDD = 57V, measure IDET | 4 |+| Detection current (VDD = 2.5V) | IDET | 96 | 99 | 102 | μA | VDD = 2.5V, measure ISUPPLY | 4 |+| Detection current (VDD = 10.1V) | IDET | 395 | 410 | 425 | μA | VDD = 10.1V, measure ISUPPLY | 4 | | VCLASS output voltage | VCLASS | 1.1 | 1.16 | 1.21 | V | 13V < VDD < 21V, 1mA < ICLASS < 43mA | 4 |-| Classification current | ICLASS | 1.8 | 2 | 2.4 | mA | RCLASS = 578Ω, 13V ≤ VDD ≤ 21V | 4 |-| Classification current | ICLASS | 9.9 | 10.55 | 11.3 | mA | RCLASS = 110Ω, 13V ≤ VDD ≤ 21V | 4 |-| Classification current | ICLASS | 17.7 | 18.7 | 19.8 | mA | RCLASS = 62Ω, 13V ≤ VDD ≤ 21V | 4 |-| Classification current | ICLASS | 26.6 | 28.15 | 29.7 | mA | RCLASS = 41.2Ω, 13V ≤ VDD ≤ 21V | 4 |-| Classification current | ICLASS | 38.2 | 40.4 | 42.6 | mA | RCLASS = 28.7Ω, 13V ≤ VDD ≤ 21V | 4 |+| Classification current, RCLASS = 578Ω | ICLASS | 1.8 | 2 | 2.4 | mA | RCLASS = 578Ω, 13V ≤ VDD ≤ 21V | 4 |+| Classification current, RCLASS = 110Ω | ICLASS | 9.9 | 10.55 | 11.3 | mA | RCLASS = 110Ω, 13V ≤ VDD ≤ 21V | 4 |+| Classification current, RCLASS = 62Ω | ICLASS | 17.7 | 18.7 | 19.8 | mA | RCLASS = 62Ω, 13V ≤ VDD ≤ 21V | 4 |+| Classification current, RCLASS = 41.2Ω | ICLASS | 26.6 | 28.15 | 29.7 | mA | RCLASS = 41.2Ω, 13V ≤ VDD ≤ 21V | 4 |+| Classification current, RCLASS = 28.7Ω | ICLASS | 38.2 | 40.4 | 42.6 | mA | RCLASS = 28.7Ω, 13V ≤ VDD ≤ 21V | 4 | | Classification lower threshold | VCL-ON | 11.8 | 12.5 | 13 | V | Class regulator turns on, VDD rising | 4 | | Classification upper threshold | VCL-OFF | 21 | 22 | 23 | V | Class regulator turns off, VDD rising | 4 | | Mark event reset threshold | VMARK-L | 4.5 | 5 | 5.5 | V |  | 4 | | Max mark event voltage | VMARK-H | 11 | 11.5 | 12 | V |  | 4 | | Mark event current | IMARK | 0.5 | 1.5 | 2 | mA |  | 4 | | IC supply current during classification | IIN-CLASS |  | 220 | 300 | μA | VDD = 17.5V, CLASS floating | 4 |-| Class leakage current | ILEAKAGE |  |  | 1 | μA | VCLASS = 0V, VDD = 57V | 4 | | VDD turn-on threshold | VDD-VSS-R | 35 | 37.5 | 40 | V | VDD rising | 4 | | VDD turn-off threshold | VDD-VSS-F | 29 | 31 | 33 | V | VDD falling | 4 |-| IC supply current during operation | IIN |  |  | 450 | μA |  | 4 |-| On resistance | RON-RTN |  | 0.48 |  | Ω | IRTN = 600mA | 5 |-| RTN leakage current | IRTN-LK |  | 1 | 15 | μA | VDD = VRTN = 57V | 5 |+| Leakage current (pass device) | IRTN-LK |  | 1 | 15 | μA | VDD = VRTN = 57V | 5 | | Current limit | ILIMIT | 720 | 840 | 900 | mA | VRTN = 1V | 5 |-| Inrush current limit | IINRUSH |  | 120 |  | mA | VRTN = 2V | 5 |-| Inrush to operation mode delay | TDELAY | 80 |  | 100 | ms |  | 5 |+| Inrush to operation mode delay | TDELAY |  | 80 | 100 | ms |  | 5 | | T2P output low voltage |  |  | 0.1 | 0.3 | V | IT2P = 2mA, respect to VSS | 5 |-| T2P output high leakage current |  |  |  | 1 | μA | VT2P = 48V | 5 |-| AUX leakage current |  |  |  | 2 | μA | VDD - VAUX = 6V | 5 | | VCC UVLO threshold | VCC-UVLO | 3.9 | 4.17 | 4.44 | V | Rising edge | 6 | | VCC regulation voltage | VCC | 10.6 | 11.8 | 12.8 | V | Load = 0mA to 10mA | 6 |-| Shutdown current | IS |  |  | 1 | μA | VEN = 0V, test supply from VIN to GND | 6 | | Quiescent current | IQ |  | 0.4 | 0.6 | mA | VFB = 1.35V, test supply from VIN to GND | 6 | | ISENSE limit | VLIMIT | 163 | 185 | 206 | mV | TJ = 25°C | 6 |-| ISENSE bias current | ISENSE |  | 0.01 | 0.15 | μA | TJ = 25°C | 6 |-| Switching frequency | FSW | 308 | 337 | 363 | kHz | RT = 6.81kΩ | 6 |-| Switching frequency | FSW | 25 | 30 | 35 | kHz | RT = 80.6kΩ | 6 | | Minimum on time | TON |  | 214 | 400 | ns |  | 6 |-| Maximum duty cycle | DMAX | 93 | 95 |  | % | RT = 6.81kΩ | 6 |-| FB reference voltage | VFB | 1.222 | 1.237 | 1.252 | V | TJ = 25°C | 7 |-| FB reference voltage | VFB | 1.211 | 1.237 | 1.258 | V | TJ = -40°C to 125°C | 7 |+| Maximum duty cycle | DMAX |  | 93 | 95 | % | RT = 6.81kΩ | 6 |+| Switching frequency (RT = 6.81kΩ) | FSW | 308 | 337 | 363 | kHz | RT = 6.81kΩ | 6 |+| Switching frequency (RT = 80.6kΩ) | FSW | 25 | 30 | 35 | kHz | RT = 80.6kΩ | 6 |+| FB reference voltage (TJ = 25°C) | VFB | 1.222 | 1.237 | 1.252 | V | TJ = 25°C | 7 |+| FB reference voltage (TJ = -40°C to 125°C) | VFB | 1.211 | 1.237 | 1.258 | V | TJ = -40°C to 125°C | 7 | | FB bias current | IFB |  | 0.01 | 0.15 | μA | VFB = 1.237V, TJ = 25°C | 7 | | OVP reference level | VOVP | 1.391 | 1.438 | 1.479 | V |  | 7 | | Enable rising threshold | VEN-RISING | 1.463 | 1.628 | 1.793 | V | TJ = 25°C | 7 | | Enable input current | IEN |  | 2.5 | 5 | μA | VEN = 3V | 7 |-| Supply voltage (VDD) recommended | VDD | 0 |  | 57 | V |  | 3 |-| VIN voltage recommended | VIN | 7 |  | 35 | V |  | 3 |-| Operating junction temperature | TJ | -40 |  | 125 | °C |  | 3 |-| Maximum T2P sink current |  |  |  | 5 | mA |  | 3 |-| Maximum PG sink current |  |  |  | 0.6 | mA |  | 3 |-| Maximum EN/SYNC sink current |  |  |  | 0.4 | mA |  | 3 |-| VDD, RTN, DET, T2P, AUX, GND to VSS |  | -0.3 |  | 100 | V | Voltage with respect to VSS | 3 |-| CLASS, FTY to VSS |  | -0.3 |  | 6.5 | V | Voltage with respect to VSS | 3 |-| VIN voltage | VIN | -0.3 |  | 40 | V | With respect to GND | 3 |-| VCC, GATE voltage |  | -0.3 |  | 15 | V | With respect to GND | 3 |-| Junction temperature | TJ |  |  | 150 | °C |  | 3 |-| Storage temperature |  | -55 |  | 150 | °C |  | 3 |-| Junction-to-ambient thermal resistance | θJA |  | 40 |  | °C/W | QFN-28 (4mmx5mm) | 3 |-| Junction-to-case thermal resistance | θJC |  | 9 |  | °C/W | QFN-28 (4mmx5mm) | 3 |+| Thermal resistance, junction-to-ambient (QFN-28 4mmx5mm) | θJA |  | 40 |  | °C/W | Measured on JESD51-7, 2-layer PCB | 3 |+| Thermal resistance, junction-to-case (QFN-28 4mmx5mm) | θJC |  | 9 |  | °C/W |  | 3 | -## CAD (KiCad official)+## CAD (land: KiCad; 3D: generated from the datasheet)  - Symbol: `MP8008GV-Z` - Footprint: `Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm`-- 3D model: QFN-28(4x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)+- 3D model: QFN-28(4x5), generated on the KiCad land (body 4 x 5 mm, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP) - 3D model files: `mp8008gv-z-etched.step` / `mp8008gv-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp8008gv-z.step` / `mp8008gv-z.glb` are the bare package body.  ## Provenance  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [MONOLITHIC POWER SYSTEMS (MPS) datasheet](docs/mp8008gv-z-datasheet.pdf) (28 pp, sha256 `620be15933636006`, retrieved 2026-11-12, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.-- **CAD:** KiCad official libraries (CC-BY-SA 4.0).+- **Datasheet:** [MONOLITHIC POWER SYSTEMS (MPS) datasheet](docs/mp8008gv-z-datasheet.pdf) (28 pp, sha256 `620be15933636006`, retrieved 2026-11-13, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).  [Datasheet PDF](docs/mp8008gv-z-datasheet.pdf)
docs/hero.png
⋯ 1 unchanged line ⋯
mp8008gv-z.kicad_sym+2−2
@@ -48,7 +48,7 @@       (name "RT" (effects (font (size 1.27 1.27))))       (number "10" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -17.78 -7.62 0) (length 5.08)+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)       (name "COMP" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )@@ -84,7 +84,7 @@       (name "CLASS" (effects (font (size 1.27 1.27))))       (number "26" (effects (font (size 1.27 1.27))))     )-    (pin input line (at 17.78 5.08 180) (length 5.08)+    (pin passive line (at 17.78 5.08 180) (length 5.08)       (name "FTY" (effects (font (size 1.27 1.27))))       (number "25" (effects (font (size 1.27 1.27))))     )
mp8008gv-z.lbr+2−2
@@ -126,7 +126,7 @@   <pin name="VIN" x="-17.78" y="0" length="middle" direction="pwr"/>   <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>   <pin name="RT" x="-17.78" y="-5.08" length="middle" direction="pas"/>-  <pin name="COMP" x="-17.78" y="-7.62" length="middle" direction="out"/>+  <pin name="COMP" x="-17.78" y="-7.62" length="middle" direction="io"/>   <pin name="FB" x="-17.78" y="-10.16" length="middle" direction="in"/>   <pin name="EN/SYNC" x="-17.78" y="-12.7" length="middle" direction="in"/>   <pin name="NC@2" x="-17.78" y="-15.24" length="middle" direction="nc"/>@@ -135,7 +135,7 @@   <pin name="NC@4" x="17.78" y="12.7" length="middle" direction="nc" rot="R180"/>   <pin name="T2P" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>   <pin name="CLASS" x="17.78" y="7.62" length="middle" direction="pas" rot="R180"/>-  <pin name="FTY" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>+  <pin name="FTY" x="17.78" y="5.08" length="middle" direction="pas" rot="R180"/>   <pin name="VSS" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>   <pin name="VSS@2" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>   <pin name="NC@5" x="17.78" y="-2.54" length="middle" direction="nc" rot="R180"/>
mp8008gv-z.step+1−1
@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-12T20:01:32',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-13T03:20:16',('Author'),(     'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'   ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
package.json+42−41
@@ -1,6 +1,6 @@ {   "slug": "mp8008gv-z",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "MONOLITHIC POWER SYSTEMS (MPS) Global Sourcing Parts, QFN-28(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "946-MP8008GV-Z"     },     "distributor_check": {-      "checked_at": "2026-11-12T20:01:42Z",+      "checked_at": "2026-11-13T03:20:24Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "1589-1728-2-ND",@@ -69,169 +69,169 @@         "number": "1",         "name": "AUX",         "type": "input",-        "description": "Auxiliary power input detector; driving VDD - AUX above 2.3V disables the hot-swap MOSFET and CLASS functions and forces T2P and PG active."+        "description": "Auxiliary power input detector: driving VDD - AUX above 2.3V disables the hot-swap MOSFET and CLASS functions and forces T2P and PG active."       },       {         "number": "2",         "name": "DET",         "type": "passive",-        "description": "Detection pin; connect a 24.9kΩ resistor between VDD and DET for PoE detection."+        "description": "Detection pin: connect a 24.9kΩ (±1%) resistor between VDD and DET for the PoE detection signature, with a valid signature resistance of 23.7kΩ to 26.3kΩ."       },       {         "number": "3",         "name": "VDD",         "type": "power_in",-        "description": "Positive power supply terminal from the PoE input power rail."+        "description": "Positive power supply terminal from the PoE input power rail, with a recommended supply voltage of 0V to 57V and an absolute maximum of -0.3V to +100V."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "5",         "name": "PG",         "type": "output",-        "description": "PD supply power good indicator pulled up by an internal current source when the PD output cap is fully charged; connect to EN/SYNC for flyback automatic start-up."+        "description": "PD supply power good indicator, pulled up by an internal current source when the PD output capacitor is fully charged; connect to EN/SYNC for flyback automatic start-up, with a recommended PG sink current of no more than 0.6mA."       },       {         "number": "6",         "name": "GATE",         "type": "output",-        "description": "Gate driving signal that drives the external N-channel power MOSFET."+        "description": "Gate driving signal that drives the external N-channel power MOSFET, with a sourcing impedance of 4.1Ω and a sinking impedance of 2Ω."       },       {         "number": "7",         "name": "VCC",         "type": "power_out",-        "description": "Flyback controller internal 12V regulator output powered through an internal LDO from VIN; connect a capacitor between VCC and GND."+        "description": "Flyback controller internal 12V regulator output, supplied through an internal LDO from VIN, which must be bypassed with a capacitor of no less than 1µF."       },       {         "number": "8",         "name": "VIN",         "type": "power_in",-        "description": "Flyback controller input supply (7V to 35V recommended); connect a bypass capacitor from VIN to GND."+        "description": "Flyback controller input supply, operating from 7V to 35V, with a bypass capacitor connected from VIN to GND."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Power ground and gate driver return pin; must be connected to RTN."+        "description": "Power ground and gate driver return; GND must be connected to RTN and the exposed pad must be connected to GND."       },       {         "number": "10",         "name": "RT",         "type": "passive",-        "description": "Switching frequency set; connect a resistor from RT to GND to set the frequency (30kHz to 400kHz)."+        "description": "Switching frequency set: a resistor from RT to GND sets the switching frequency between 30kHz and 400kHz."       },       {         "number": "11",         "name": "COMP",-        "type": "output",-        "description": "Error amplifier output pin for feedback of the isolated flyback."+        "type": "bidirectional",+        "description": "Feedback input for isolated flyback and error amplifier output for non-isolated solutions, which requires an R-C compensation network in non-isolated mode."       },       {         "number": "12",         "name": "FB",         "type": "input",-        "description": "Feedback and OVP monitor pin for non-isolated solutions; connect FB to GND if not used in isolated flyback."+        "description": "Feedback and OVP monitor for non-isolated flyback, with an OVP reference of 1.438V typical; connect to GND if not used in isolated flyback."       },       {         "number": "13",         "name": "EN/SYNC",         "type": "input",-        "description": "On/off control input with internal 1MΩ resistor to GND; an external clock higher than the RT set frequency synchronizes the switching frequency."+        "description": "On/off control input with an internal 1MΩ pull-down to GND and an enable rising threshold of 1.628V typical, which can also accept an external clock above the RT-set frequency for synchronization; external pull-up current must be limited to 0.4mA."       },       {         "number": "14",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "15",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "16",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "17",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "18",         "name": "SS",         "type": "passive",-        "description": "Soft start; a capacitor between SS and GND sets both the soft-start time and hiccup protection delay."+        "description": "Soft-start pin: a capacitor from SS to GND sets the soft-start time and hiccup protection delay, with the SS voltage clamped at 3.65V during normal operation."       },       {         "number": "19",         "name": "ISENSE",         "type": "input",-        "description": "Current sense and isolated/non-isolated mode setting pin; senses voltage across the sense resistor for current mode control, cycle-by-cycle limit, overload and short-circuit protection."+        "description": "Current sense and feedback mode setting pin that senses the sense resistor voltage for cycle-by-cycle current limit, with an ISENSE current limit threshold of 185mV typical."       },       {         "number": "20",         "name": "RTN",         "type": "passive",-        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN."+        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN, with an RTN on-resistance of 0.48Ω typical at 600mA."       },       {         "number": "21",         "name": "RTN",         "type": "passive",-        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN."+        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN, with an RTN on-resistance of 0.48Ω typical at 600mA."       },       {         "number": "22",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "23",         "name": "VSS",         "type": "power_in",-        "description": "Negative power supply terminal from the PoE input power rail."+        "description": "Negative power supply terminal from the PoE input power rail, which serves as the reference for VDD, DET, CLASS, T2P and RTN voltages."       },       {         "number": "24",         "name": "VSS",         "type": "power_in",-        "description": "Negative power supply terminal from the PoE input power rail."+        "description": "Negative power supply terminal from the PoE input power rail, which serves as the reference for VDD, DET, CLASS, T2P and RTN voltages."       },       {         "number": "25",         "name": "FTY",-        "type": "input",+        "type": "passive",         "description": "Factory use only; FTY must be connected to VSS in application."       },       {         "number": "26",         "name": "CLASS",         "type": "passive",-        "description": "Classification pin; connect a resistor from CLASS to VSS to program the classification current."+        "description": "Classification pin: connect a resistor from CLASS to VSS to program the classification current, with a typical CLASS voltage of 1.16V in the classification range."       },       {         "number": "27",         "name": "T2P",         "type": "output",-        "description": "Open-drain Type-2 PSE indicator; pulled low to VSS indicates a Type-2 PSE or a wall adapter is present."+        "description": "Type-2 PSE indicator, an active-low open-drain output that indicates a Type-2 PSE or wall adapter presence, with a maximum sink current of 5mA referenced to VSS."       },       {         "number": "28",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "29",@@ -245,17 +245,18 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The package drawing on page 28 shows an exposed paddle, but the pin table doesn't number or name it ; The datasheet doesn't give ERC types, so they are inferred from the descriptions. DET, RT, SS, CLASS"+          "extractor flagged: The top-view pin map on page 2 is garbled in the extracted text, so the pin-number-to-physical-locat; Pin types are not stated in the datasheet and were inferred from the function descriptions for KiCad; The datasheet lists these seven pins together as NC (not connected internally); each is listed separ",+          "exposed pad 29 added from the footprint"         ],-        "pages_sent": 8,-        "cost_usd": 0.1091,-        "at": "2026-11-12T20:01:25"+        "pages_sent": 28,+        "cost_usd": 0.0326,+        "at": "2026-11-13T03:20:12"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/3882b88b88c12299da9dca05281e1e87.pdf",@@ -263,7 +264,7 @@         "sha256": "620be15933636006",         "source_tier": "lcsc"       },-      "cad": "KiCad official (CC-BY-SA 4.0)",+      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",       "model_3d_generated": {         "generator": "factory/gen_pkg3d.py",         "family": "QFN",@@ -298,8 +299,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "176002082534d8763b01c5c70e437f1fd330cb919c73d5a17e088e4138db0776",-        "checked": "2026-11-12",+        "sha256": "45ef3907146575c4d5c0dc523d3bab3055b5ad4917104078307a083a9cfbe5ed",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -317,8 +318,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "c96782e4ec8b5bbfcd8080cf8f82fbb66d0572c5057c380e9cbb22497dac712d",-        "checked": "2026-11-12",+        "sha256": "37bfd4e3b0235afbd74d38d785e387e0cba0733d45d2c964d9de2681b0210ed8",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+45−42
@@ -4,7 +4,7 @@   "slug": "mp8008gv-z",   "title": "MP8008GV-Z",   "brief": "MONOLITHIC POWER SYSTEMS (MPS) Global Sourcing Parts, QFN-28(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "946-MP8008GV-Z"     },     "distributor_check": {-      "checked_at": "2026-11-12T20:01:42Z",+      "checked_at": "2026-11-13T03:20:24Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "1589-1728-2-ND",@@ -52,169 +52,169 @@         "number": "1",         "name": "AUX",         "type": "input",-        "description": "Auxiliary power input detector; driving VDD - AUX above 2.3V disables the hot-swap MOSFET and CLASS functions and forces T2P and PG active."+        "description": "Auxiliary power input detector: driving VDD - AUX above 2.3V disables the hot-swap MOSFET and CLASS functions and forces T2P and PG active."       },       {         "number": "2",         "name": "DET",         "type": "passive",-        "description": "Detection pin; connect a 24.9kΩ resistor between VDD and DET for PoE detection."+        "description": "Detection pin: connect a 24.9kΩ (±1%) resistor between VDD and DET for the PoE detection signature, with a valid signature resistance of 23.7kΩ to 26.3kΩ."       },       {         "number": "3",         "name": "VDD",         "type": "power_in",-        "description": "Positive power supply terminal from the PoE input power rail."+        "description": "Positive power supply terminal from the PoE input power rail, with a recommended supply voltage of 0V to 57V and an absolute maximum of -0.3V to +100V."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "5",         "name": "PG",         "type": "output",-        "description": "PD supply power good indicator pulled up by an internal current source when the PD output cap is fully charged; connect to EN/SYNC for flyback automatic start-up."+        "description": "PD supply power good indicator, pulled up by an internal current source when the PD output capacitor is fully charged; connect to EN/SYNC for flyback automatic start-up, with a recommended PG sink current of no more than 0.6mA."       },       {         "number": "6",         "name": "GATE",         "type": "output",-        "description": "Gate driving signal that drives the external N-channel power MOSFET."+        "description": "Gate driving signal that drives the external N-channel power MOSFET, with a sourcing impedance of 4.1Ω and a sinking impedance of 2Ω."       },       {         "number": "7",         "name": "VCC",         "type": "power_out",-        "description": "Flyback controller internal 12V regulator output powered through an internal LDO from VIN; connect a capacitor between VCC and GND."+        "description": "Flyback controller internal 12V regulator output, supplied through an internal LDO from VIN, which must be bypassed with a capacitor of no less than 1µF."       },       {         "number": "8",         "name": "VIN",         "type": "power_in",-        "description": "Flyback controller input supply (7V to 35V recommended); connect a bypass capacitor from VIN to GND."+        "description": "Flyback controller input supply, operating from 7V to 35V, with a bypass capacitor connected from VIN to GND."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Power ground and gate driver return pin; must be connected to RTN."+        "description": "Power ground and gate driver return; GND must be connected to RTN and the exposed pad must be connected to GND."       },       {         "number": "10",         "name": "RT",         "type": "passive",-        "description": "Switching frequency set; connect a resistor from RT to GND to set the frequency (30kHz to 400kHz)."+        "description": "Switching frequency set: a resistor from RT to GND sets the switching frequency between 30kHz and 400kHz."       },       {         "number": "11",         "name": "COMP",-        "type": "output",-        "description": "Error amplifier output pin for feedback of the isolated flyback."+        "type": "bidirectional",+        "description": "Feedback input for isolated flyback and error amplifier output for non-isolated solutions, which requires an R-C compensation network in non-isolated mode."       },       {         "number": "12",         "name": "FB",         "type": "input",-        "description": "Feedback and OVP monitor pin for non-isolated solutions; connect FB to GND if not used in isolated flyback."+        "description": "Feedback and OVP monitor for non-isolated flyback, with an OVP reference of 1.438V typical; connect to GND if not used in isolated flyback."       },       {         "number": "13",         "name": "EN/SYNC",         "type": "input",-        "description": "On/off control input with internal 1MΩ resistor to GND; an external clock higher than the RT set frequency synchronizes the switching frequency."+        "description": "On/off control input with an internal 1MΩ pull-down to GND and an enable rising threshold of 1.628V typical, which can also accept an external clock above the RT-set frequency for synchronization; external pull-up current must be limited to 0.4mA."       },       {         "number": "14",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "15",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "16",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "17",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "18",         "name": "SS",         "type": "passive",-        "description": "Soft start; a capacitor between SS and GND sets both the soft-start time and hiccup protection delay."+        "description": "Soft-start pin: a capacitor from SS to GND sets the soft-start time and hiccup protection delay, with the SS voltage clamped at 3.65V during normal operation."       },       {         "number": "19",         "name": "ISENSE",         "type": "input",-        "description": "Current sense and isolated/non-isolated mode setting pin; senses voltage across the sense resistor for current mode control, cycle-by-cycle limit, overload and short-circuit protection."+        "description": "Current sense and feedback mode setting pin that senses the sense resistor voltage for cycle-by-cycle current limit, with an ISENSE current limit threshold of 185mV typical."       },       {         "number": "20",         "name": "RTN",         "type": "passive",-        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN."+        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN, with an RTN on-resistance of 0.48Ω typical at 600mA."       },       {         "number": "21",         "name": "RTN",         "type": "passive",-        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN."+        "description": "Drain of the PD hot-swap MOSFET; connect GND and the flyback power return to RTN, with an RTN on-resistance of 0.48Ω typical at 600mA."       },       {         "number": "22",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "23",         "name": "VSS",         "type": "power_in",-        "description": "Negative power supply terminal from the PoE input power rail."+        "description": "Negative power supply terminal from the PoE input power rail, which serves as the reference for VDD, DET, CLASS, T2P and RTN voltages."       },       {         "number": "24",         "name": "VSS",         "type": "power_in",-        "description": "Negative power supply terminal from the PoE input power rail."+        "description": "Negative power supply terminal from the PoE input power rail, which serves as the reference for VDD, DET, CLASS, T2P and RTN voltages."       },       {         "number": "25",         "name": "FTY",-        "type": "input",+        "type": "passive",         "description": "Factory use only; FTY must be connected to VSS in application."       },       {         "number": "26",         "name": "CLASS",         "type": "passive",-        "description": "Classification pin; connect a resistor from CLASS to VSS to program the classification current."+        "description": "Classification pin: connect a resistor from CLASS to VSS to program the classification current, with a typical CLASS voltage of 1.16V in the classification range."       },       {         "number": "27",         "name": "T2P",         "type": "output",-        "description": "Open-drain Type-2 PSE indicator; pulled low to VSS indicates a Type-2 PSE or a wall adapter is present."+        "description": "Type-2 PSE indicator, an active-low open-drain output that indicates a Type-2 PSE or wall adapter presence, with a maximum sink current of 5mA referenced to VSS."       },       {         "number": "28",         "name": "NC",         "type": "unconnected",-        "description": "Not connected internally; connect NC to GND during layout."+        "description": "Not connected internally; connect to GND during layout."       },       {         "number": "29",@@ -228,17 +228,18 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The package drawing on page 28 shows an exposed paddle, but the pin table doesn't number or name it ; The datasheet doesn't give ERC types, so they are inferred from the descriptions. DET, RT, SS, CLASS"+          "extractor flagged: The top-view pin map on page 2 is garbled in the extracted text, so the pin-number-to-physical-locat; Pin types are not stated in the datasheet and were inferred from the function descriptions for KiCad; The datasheet lists these seven pins together as NC (not connected internally); each is listed separ",+          "exposed pad 29 added from the footprint"         ],-        "pages_sent": 8,-        "cost_usd": 0.1091,-        "at": "2026-11-12T20:01:25"+        "pages_sent": 28,+        "cost_usd": 0.0326,+        "at": "2026-11-13T03:20:12"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/3882b88b88c12299da9dca05281e1e87.pdf",@@ -246,7 +247,7 @@         "sha256": "620be15933636006",         "source_tier": "lcsc"       },-      "cad": "KiCad official (CC-BY-SA 4.0)",+      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",       "model_3d_generated": {         "generator": "factory/gen_pkg3d.py",         "family": "QFN",@@ -281,8 +282,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "176002082534d8763b01c5c70e437f1fd330cb919c73d5a17e088e4138db0776",-        "checked": "2026-11-12",+        "sha256": "45ef3907146575c4d5c0dc523d3bab3055b5ad4917104078307a083a9cfbe5ed",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -300,8 +301,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "c96782e4ec8b5bbfcd8080cf8f82fbb66d0572c5057c380e9cbb22497dac712d",-        "checked": "2026-11-12",+        "sha256": "37bfd4e3b0235afbd74d38d785e387e0cba0733d45d2c964d9de2681b0210ed8",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -1084,5 +1085,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "MONOLITHIC POWER SYSTEMS (MPS) Global Sourcing Parts, QFN-28(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file