Generated by kicad-footprint-generator · KiCad file format 20260206
MP6922AGSE-Z
Monolithic Power Systems · AC-DC Controllers & Regulators · SOIC-8
MP6922AGSE-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VG2 | output | MOSFET 2 gate driver output, with VG2 high clamped to about 14.5V typ when VDD >16V and a 3A pull-down current. |
| 2 | PGND | power_in | Power ground, the power switch return, held within ±0.3V of VS1, VS2 and VSS. |
| 3 | EN | input | Enable pin that enables the internal logic above the EN shutdown threshold (1.5V typ rising) and keeps the gate driver latched until EN exceeds the EN UVLO threshold (3V typ rising); rated -0.3V to +6.5V. |
| 4 | VD2 | input | MOSFET 2 drain voltage sense, rated -0.7V to +180V relative to VSS, with a small series resistor to the MOSFET drain recommended. |
| 5 | VSS | power_in | Common source pin used as the reference for both channels (SOIC8 has no separate VS1/VS2 pins). |
| 6 | VD1 | input | MOSFET 1 drain voltage sense, rated -0.7V to +180V relative to VSS, with a small series resistor to the MOSFET drain recommended. |
| 7 | VDD | power_in | Supply voltage, 8V to 24V recommended operating range (absolute maximum 26V). |
| 8 | VG1 | output | MOSFET 1 gate driver output, with VG1 high clamped to about 14.5V typ when VDD >16V and a 3A pull-down current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Voltage Range | VDD | 8 | 24 | V | 4 | ||
| VDD UVLO Threshold Rising | 4.8 | 6 | 7 | V | Rising | 4 | |
| VDD UVLO Threshold Hysteresis | 0.5 | 1 | 1.5 | V | Hysteresis | 4 | |
| Operating Current | ICC | 12 | 18 | 23 | mA | CLOAD=5nF, FSW=100kHz | 4 |
| Operating Current | ICC | 24 | 27 | 31 | mA | CLOAD=10nF, FSW=100kHz | 4 |
| Shutdown Current | 600 | µA | VDD=20V, EN=0V | 4 | |||
| Light-Load Mode Current | 600 | µA | 4 | ||||
| Enable Shutdown Threshold Rising | 1.1 | 1.5 | 2 | V | Rising | 4 | |
| Enable Shutdown Threshold Hysteresis | 0.2 | 0.45 | V | Hysteresis | 4 | ||
| Enable UVLO Threshold Rising | 2.3 | 3 | 3.6 | V | Rising | 4 | |
| Enable UVLO Threshold Hysteresis | 0.2 | 0.45 | V | Hysteresis | 4 | ||
| Internal Pull-up Current on EN | 10 | 16 | µA | 4 | |||
| VS1,2-VD1,2 Forward Voltage | Vfwd | 15 | 30 | 45 | mV | 4 | |
| Turn-on delay | τDon | 150 | 200 | ns | CLOAD=5nF, -20°C≤TJ≤125°C | 4 | |
| Turn-on delay | τDon | 250 | ns | CLOAD=5nF, -40°C≤TJ<-20°C | 4 | ||
| Turn-on delay | τDon | 250 | 300 | ns | CLOAD=10nF, -20°C≤TJ≤125°C | 4 | |
| Turn-on delay | τDon | 350 | ns | CLOAD=10nF, -40°C≤TJ<-20°C | 4 | ||
| Input Bias Current on VD1,2 pin | 1.5 | µA | VD1,2 = 180V | 4 | |||
| Light-Load-Enter Delay | τLL-Delay | 80 | 160 | 260 | µs | RLL=100kΩ | 4 |
| Light-Load Exit-Pulse Width Threshold (VD1,2-VS1,2) | VLL-DS | -450 | -300 | -140 | mV | 4 | |
| Reverse-Current-Protection Threshold | VRCP | 2.5 | 3 | 3.5 | V | 4 | |
| Reverse-Current-Protection Latch Time | τRCP | 80 | 150 | 230 | µs | 4 | |
| VG1,2 (Low) | 0.1 | V | ILOAD=1mA | 4 | |||
| VG1,2 (High) | 13 | 14.5 | 16 | V | VDD >16V | 4 | |
| Turn-Off Total Delay | τDoff | 50 | 75 | ns | VD1,2= VSS, CLOAD=5nF, RGATE=0Ω | 5 | |
| Pull-Down Impedance | 1 | 2 | Ω | 5 | |||
| VDD to VS1,VS2, VSS | VDD | -0.3 | 26 | V | 3 | ||
| PGND to VS1,VS2, VSS | -0.3 | 0.3 | V | 3 | |||
| VG1 to VS1, VSS | VG1 | -0.3 | V | max is VDD | 3 | ||
| VG2 to VS2, VSS | VG2 | -0.3 | V | max is VDD | 3 | ||
| VD1 to VS1, VSS | VD1 | -0.7 | 180 | V | 3 | ||
| VD2 to VS2, VSS | VD2 | -0.7 | 180 | V | 3 | ||
| LL, EN to VS1,VS2, VSS | -0.3 | 6.5 | V | 3 | |||
| Maximum Operating Frequency | 300 | kHz | 3 | ||||
| Continuous Power Dissipation SOIC8 | PD | 1.4 | W | TA = +25°C | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature (Solder) | 260 | °C | 3 | ||||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Recommended VDD to VS1,VS2, VSS | VDD | 8 | 24 | V | 3 | ||
| Operating Junction Temp. | TJ | -40 | 125 | °C | 3 | ||
| Thermal Resistance Junction-to-Case SOIC8 | θJC | 45 | °C/W | JESD51-7, 4-layer PCB, no heatsink | 3 | ||
| Thermal Shutdown | 150 | °C | 4 | ||||
| Thermal Shutdown hysteresis | 30 | °C | 4 | ||||
| Minimum ON-Time | τMIN | 1 | µs | CLOAD = 5nF | 4 | ||
| Minimum OFF-Time | τOFF | 1.6 | µs | 4 | |||
| Turn-Off Propagation Delay | 15 | ns | VD1,2= VSS | 4 | |||
| Pull-Down Current | 3 | A | 3V <VG1,2<10V | 5 |
CAD (KiCad official)
- Symbol:
MP6922AGSE-Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mp6922agse-z-etched.step/mp6922agse-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp6922agse-z.step/mp6922agse-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (15 pp, sha256
90d3fe1866497eb5, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).