MP6610GS-Z

{
  "slug": "mp6610gs-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "mp6610gs-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp6610gs-z.kicad_sym",
    "mp6610gs-z.kicad_mod",
    "mp6610gs-z.glb",
    "mp6610gs-z.step",
    "mp6610gs-z.lbr",
    "docs/hero.png",
    "docs/mp6610gs-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp6610gs-z-hero.glb",
    "mp6610gs-z-hero.overlay.json",
    "mp6610gs-z-etched.glb"
  ],
  "component": {
    "mpn": "MP6610GS-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922724099371008",
    "parts": {
      "symbol": "mp6610gs-z.kicad_sym",
      "footprint": "mp6610gs-z.kicad_mod",
      "model_3d": "mp6610gs-z-hero.glb",
      "model_3d_plain": "mp6610gs-z-etched.glb",
      "model_3d_step": "mp6610gs-z-etched.step",
      "model_3d_step_plain": "mp6610gs-z.step",
      "lbr": "mp6610gs-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C3655415",
      "digikey": "1589-MP6610GS-ZTR-ND",
      "mouser": "946-MP6610GS-Z"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T17:36:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1589-MP6610GS-ZTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "946-MP6610GS-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BST",
        "type": "passive",
        "description": "Bootstrap pin: connect a 100nF capacitor between BST and OUT; BST is rated VIN to (VIN + 5.7V)."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, rated 4V to 55V for the SOIC-8 package (absolute maximum -0.3V to +65V); decouple VIN to GND with a 100nF or greater ceramic capacitor."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "output",
        "description": "Half-bridge output terminal (absolute maximum -0.7V to +65V); a 100nF capacitor connects it to BST."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "System ground."
      },
      {
        "number": "5",
        "name": "nFAULT",
        "type": "output",
        "description": "Open-drain fault indication output that goes logic low on over-current protection, over-temperature protection, or open load, and requires an external pull-up resistor."
      },
      {
        "number": "6",
        "name": "ISET",
        "type": "passive",
        "description": "Current configuration pin: a resistor from ISET to ground sets the current limit and ISET voltage scaling (absolute maximum -0.3V to +5.5V)."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "input",
        "description": "Half-bridge input: pull high to drive the output high and low to force the output low; pin is pulled down via an internal resistor."
      },
      {
        "number": "8",
        "name": "EN",
        "type": "input",
        "description": "Half-bridge enable input: pull high to turn the half-bridge driver on and low to turn it off; pin is pulled down via an internal resistor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not assign an ERC class to BST or ISET; they are typed as passive because they ar; nFAULT is an open-drain output; it is typed as output, and the external pull-up requirement is state"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0628,
        "at": "2026-10-20T17:34:05"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922724099371008",
        "pages": 16,
        "sha256": "8ef37175aa799bb6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp6610gs-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp6610gs-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e22dfa42c65849262585b9f971394e96e6093ca8f853e1d0b31331bdd7de89b2",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}