Generated by kicad-footprint-generator · KiCad file format 20260206
MP6539BGV-Z
Monolithic Power Systems · Gate Drivers · QFN-28(4x5)
MP6539BGV-Z from Monolithic Power Systems, in a QFN-28(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device; the exposed pad on the backside is also connected to GND. |
| 2 | NC | unconnected | No connection. |
| 3 | CSO | output | Current sense output that carries the LSS voltage (relative to GND) amplified by 20, and requires a minimum 1nF capacitor to ground for stability. |
| 4 | NC | unconnected | No connection. |
| 5 | VDD | power_in | Gate driver supply voltage, recommended 8.5V to 14V, and VDD must rise above the 7.5V UVLO threshold to power up. |
| 6 | BSTA | power_out | Phase A bootstrap output that supplies the high-side gate driver, with an absolute maximum of 120V. |
| 7 | SHA | passive | Phase A high-side source connection, with absolute maximum range of -5V to 110V (-8V to 110V for 2µs transients). |
| 8 | GHA | output | Phase A high-side gate drive output, which must not exceed (BST - SH) + 0.3V. |
| 9 | GLA | output | Phase A low-side gate drive output, with 0.8A maximum source current and 1A maximum sink current. |
| 10 | BSTB | power_out | Phase B bootstrap output that supplies the high-side gate driver, with an absolute maximum of 120V. |
| 11 | SHB | passive | Phase B high-side source connection, with absolute maximum range of -5V to 110V (-8V to 110V for 2µs transients). |
| 12 | GHB | output | Phase B high-side gate drive output, which must not exceed (BST - SH) + 0.3V. |
| 13 | GLB | output | Phase B low-side gate drive output, with 0.8A maximum source current and 1A maximum sink current. |
| 14 | BSTC | power_out | Phase C bootstrap output that supplies the high-side gate driver, with an absolute maximum of 120V. |
| 15 | SHC | passive | Phase C high-side source connection, with absolute maximum range of -5V to 110V (-8V to 110V for 2µs transients). |
| 16 | GHC | output | Phase C high-side gate drive output, which must not exceed (BST - SH) + 0.3V. |
| 17 | GLC | output | Phase C low-side gate drive output, with 0.8A maximum source current and 1A maximum sink current. |
| 18 | LSS | passive | Low-side source connection for the current sense amplifier, with absolute maximum of 4V; connect directly to ground if the current sense amplifier is not used. |
| 19 | LSC | input | Phase C low-side logic input that controls the low-side MOSFET together with HSC per Table 1. |
| 20 | LSB | input | Phase B low-side logic input that controls the low-side MOSFET together with HSB per Table 1. |
| 21 | LSA | input | Phase A low-side logic input that controls the low-side MOSFET together with HSA per Table 1. |
| 22 | HSC | input | Phase C high-side logic input that controls the high-side MOSFET together with LSC per Table 1, where equal logic levels on both inputs leave the output high-impedance. |
| 23 | HSB | input | Phase B high-side logic input that controls the high-side MOSFET together with LSB per Table 1, where equal logic levels on both inputs leave the output high-impedance. |
| 24 | HSA | input | Phase A high-side logic input that controls the high-side MOSFET together with LSA per Table 1, where equal logic levels on both inputs leave the output high-impedance. |
| 25 | nFAULT | output | Fault indication open-drain output that is driven low during a fault condition such as over-temperature, and requires an external pull-up. |
| 26 | nSLEEP | input | Sleep mode input that enters low-power sleep when logic low and enables the device when high, with an internal 500kΩ pull-down. |
| 27 | NC | unconnected | No connection. |
| 28 | DT | passive | Dead-time setting pin, where a resistor to GND sets tDEAD(µs) = 0.044 × RDT(kΩ) + 0.1, DT tied to GND gives a 77ns minimum, and DT left open gives 6µs. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-28(4x5) |
| Category | Motor Driver ICs |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gate driver supply voltage | VDD | 8.5 | 14 | V | 5 | ||
| Quiescent current | IQ | 1.1 | mA | nSLEEP = 1, not switching | 5 | ||
| Sleep current | ISLEEP | 2 | µA | nSLEEP = 0 | 5 | ||
| Input logic low threshold | VIL | 0.8 | V | 5 | |||
| Input logic high threshold | VIH | 2 | V | 5 | |||
| Logic input current IIN(H) | IIN(H) | -2.4 | 2.4 | µA | VIH = 0.8V | 5 | |
| Logic input current IIN(L) | IIN(L) | -14 | 14 | µA | VIL = 5V | 5 | |
| Output low voltage (fault output, open-drain) | VOL | 0.15 | V | IO = 5mA | 5 | ||
| Output high leakage current (fault output) | IOH | 1 | µA | VO = 3.3V | 5 | ||
| VDD UVLO rising threshold | VDD_RUVLO | 6.5 | 7.5 | 8.5 | V | 5 | |
| VDD UVLO falling threshold | VDD_FUVLO | 6 | 6.8 | 7.6 | V | 5 | |
| Maximum source current | ISOURCE | 0.8 | A | 5 | |||
| Maximum sink current | ISINK | 1 | A | 5 | |||
| HS gate drive pull-down resistance | RHS-DN | 0.5 | 5.5 | Ω | VDS = 1V | 5 | |
| LS gate drive pull-down resistance | RLS-DN | 0.5 | 5.5 | Ω | VDS = 1V | 5 | |
| Input voltage (VDD) GLA/B/C | VDD | -0.3 | 14.5 | V | 4 | ||
| BSTA/B/C | BST | -0.3 | 120 | V | 4 | ||
| GHA/B/C (max = (BST - SH) + 0.3 V, not numeric) | GH | -0.3 | V | 4 | |||
| GHA/B/C transient | GH | -8 | V | transient, 2µs | 4 | ||
| LSS | LSS | -0.3 | 4 | V | 4 | ||
| LSS transient | LSS | -1 | 4 | V | transient, 2µs | 4 | |
| All other pins to GND | -0.3 | 6.5 | V | 4 | |||
| SHA/B/C | SH | -5 | 110 | V | 4 | ||
| SHA/B/C transient | SH | -8 | 110 | V | transient, 2µs | 4 | |
| Storage temperature | TSTG | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature (solder) | 260 | °C | 4 | ||||
| Motor voltage | VIN | 8 | 100 | V | 4 | ||
| Input voltage (VDD) | VDD | 8.5 | 14 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| External capacitor from CSO to ground | 1 | nF | connected from CSO to ground for stability | 11 | |||
| External resistor on CSO filter | 1 | kΩ | 11 | ||||
| Internal feedback resistor (CSO discharge) | 450 | kΩ | 11 | ||||
| nSLEEP pull-down resistance | RSLEEP-PD | 500 | kΩ | 5 | |||
| Internal pull-down resistance | RPD | 500 | kΩ | 5 | |||
| Thermal resistance junction-to-ambient QFN-28 (4mmx5mm) | θJA | 40 | °C/W | Measured on JESD51-7, 4-layer PCB | 4 | ||
| Thermal resistance junction-to-case QFN-28 (4mmx5mm) | θJC | 9 | °C/W | Measured on JESD51-7, 4-layer PCB | 4 |
CAD (KiCad official)
- Symbol:
MP6539BGV-Z - Footprint:
Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: QFN-28(4x5) (KiCad packages3D, STEP)
- 3D model files:
mp6539bgv-z-etched.step/mp6539bgv-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp6539bgv-z.step/mp6539bgv-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (15 pp, sha256
3451ecd9178307b8, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).