component
MP6513LGJ-Z
Public Made by Adomby adom
Monolithic Power Systems Motor Driver ICs, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP6513LGJ-Z
Monolithic Power Systems · Motor Driver ICs · TSOT-23-6
MP6513LGJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Input 1 controls the H-bridge output mode together with IN2 and has an internal pull-down resistor (100 kΩ typ per RPD). |
| 2 | GND | power_in | Ground. |
| 3 | IN2 | input | Input 2 controls the H-bridge output mode together with IN1 and has an internal pull-down resistor (100 kΩ typ per RPD). |
| 4 | OUT2 | output | Switch output 2, connect to the motor winding. |
| 5 | VCC | power_in | Supply voltage of 2.5V to 5.5V; an input capacitor is needed to prevent large voltage spikes from appearing at the input. |
| 6 | OUT1 | output | Switch output 1, connect to the motor winding. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6.5 | V | 3 | ||
| Output voltage | VOUTx | -0.3 | V | -0.3V to VCC + 0.3V | 3 | ||
| All other pins | -0.3 | 6 | V | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature | 260 | °C | 3 | ||||
| Storage temperature | -60 | 150 | °C | 3 | |||
| Supply voltage | VCC | 2.5 | 5.5 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Junction-to-case thermal resistance | θJC | 55 | °C/W | TSOT23-6, JESD51-7 4-layer PCB | 3 | ||
| Operating supply current | 0.82 | 1.2 | mA | VCC = 5V, TJ = -40°C to 125°C | 4 | ||
| Sleep mode supply current | IQ | 200 | nA | IN1 = 0V, IN2 = 0V | 4 | ||
| Under-voltage lockout threshold rising | 2.2 | 2.45 | V | 4 | |||
| Under-voltage lockout threshold hysteresis | 200 | mV | 4 | ||||
| Input high voltage | VIH | 1.75 | V | 4 | |||
| Input low voltage | VIL | 0.4 | V | 4 | |||
| Input high current | IIH | 50 | μA | VIN = 3.3V | 4 | ||
| Input low current | IIL | -5 | 5 | μA | VIN = 0V | 4 | |
| Input pull-down resistance | RPD | 100 | kΩ | 4 | |||
| HS switch on resistance | RDS(ON) | 0.5 | 0.6 | Ω | IO = 100mA, TA = 25°C | 4 | |
| LS switch on resistance | RDS(ON) | 0.5 | 0.6 | Ω | IO = 100mA, TA = 25°C | 4 | |
| Current limit | IOCP | 1 | 2 | A | 4 | ||
| OCP retry time | TOCR | 0.85 | ms | 4 | |||
| Sleep entry time | 2 | 5 | ms | IN1 = 0V, IN2 = 0V for 2ms | 4 | ||
| Sleep recovery time | 27 | μs | IN1 or IN2 or both = high level | 4 | |||
| Output enable time | T1 | 200 | ns | 4 | |||
| Output disable time | T2 | 260 | ns | 4 | |||
| Delay time INx high to OUTx high | T3 | 270 | ns | INx high to OUTx high | 4 | ||
| Delay time INx low to OUTx low | T4 | 350 | ns | INx low to OUTx low | 4 | ||
| Output rise time | 30 | 220 | ns | 4 | |||
| Output fall time | 30 | 170 | ns | 4 | |||
| Dead time | 100 | ns | 4 | ||||
| Thermal shutdown threshold | TTSD | 160 | °C | Guaranteed by design | 4 | ||
| Thermal shutdown hysteresis | 25 | °C | Guaranteed by design | 4 |
CAD (KiCad official)
- Symbol:
MP6513LGJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp6513lgj-z-etched.step/mp6513lgj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp6513lgj-z.step/mp6513lgj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (11 pp, sha256
4dd843714e5c66d5, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).