main
Ray Publish 0.1.0 8caadcf
{
  "slug": "mp6500agf-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems Motor Driver ICs, TSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "mp6500agf-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp6500agf-z.kicad_sym",
    "mp6500agf-z.kicad_mod",
    "mp6500agf-z.glb",
    "mp6500agf-z.step",
    "mp6500agf-z.lbr",
    "docs/hero.png",
    "docs/mp6500agf-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp6500agf-z-hero.glb",
    "mp6500agf-z-hero.overlay.json"
  ],
  "component": {
    "mpn": "MP6500AGF-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "TSSOP-28-EP",
    "pin_count": 29,
    "category": "Power Management ICs",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a0cacd630ce070dddc44ed6cd57cefce.pdf",
    "parts": {
      "symbol": "mp6500agf-z.kicad_sym",
      "footprint": "mp6500agf-z.kicad_mod",
      "model_3d": "mp6500agf-z-hero.glb",
      "model_3d_plain": "mp6500agf-z.glb",
      "model_3d_step": "mp6500agf-z-etched.step",
      "model_3d_step_plain": "mp6500agf-z.step",
      "lbr": "mp6500agf-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C6306172",
      "digikey": "1589-MP6500AGF-ZTR-ND",
      "mouser": "946-MP6500AGF-Z"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T03:41:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1589-MP6500AGF-ZTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "946-MP6500AGF-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VG",
        "type": "power_out",
        "description": "Low-side MOSFET gate drive voltage, which requires a 220nF to 1µF, 16V, ceramic capacitor to ground."
      },
      {
        "number": "2",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep mode input; drive nSLEEP to logic high to enable normal operation, and it has an internal pull-down resistor."
      },
      {
        "number": "3",
        "name": "nENBL",
        "type": "input",
        "description": "Enable input; logic low enables the bridge outputs and translator operation, logic high disables them, and it has an internal pull-down resistor."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "6",
        "name": "AOUT2",
        "type": "output",
        "description": "Bridge A output terminal 2."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; all VIN pins must be connected to the same supply and decoupled to ground with a minimum 100nF ceramic capacitor."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; all VIN pins must be connected to the same supply and decoupled to ground with a minimum 100nF ceramic capacitor."
      },
      {
        "number": "9",
        "name": "AOUT1",
        "type": "output",
        "description": "Bridge A output terminal 1."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "11",
        "name": "DIR",
        "type": "input",
        "description": "Direction input that sets the direction of rotation of the stepper motor, and it has an internal pull-down resistor."
      },
      {
        "number": "12",
        "name": "nFAULT",
        "type": "output",
        "description": "Fault indication open-drain output that is driven low in a fault condition (OCP, OTP, OVP)."
      },
      {
        "number": "13",
        "name": "VSET",
        "type": "input",
        "description": "Current set programming; a voltage between 0V and 2V applied to VSET sets the current through the motor."
      },
      {
        "number": "14",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "15",
        "name": "ROSC",
        "type": "passive",
        "description": "Constant off-time programming; a resistor from ROSC to ground sets the PWM off time."
      },
      {
        "number": "16",
        "name": "MS2",
        "type": "input",
        "description": "Mode selection input which, together with MS1, sets the step mode (full-, half-, quarter-, or eighth-step), and it has an internal pull-down resistor."
      },
      {
        "number": "17",
        "name": "MS1",
        "type": "input",
        "description": "Mode selection input which, together with MS2, sets the step mode (full-, half-, quarter-, or eighth-step), and it has an internal pull-down resistor."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "19",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "20",
        "name": "BOUT1",
        "type": "output",
        "description": "Bridge B output terminal 1."
      },
      {
        "number": "21",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; all VIN pins must be connected to the same supply and decoupled to ground with a minimum 100nF ceramic capacitor."
      },
      {
        "number": "22",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; all VIN pins must be connected to the same supply and decoupled to ground with a minimum 100nF ceramic capacitor."
      },
      {
        "number": "23",
        "name": "BOUT2",
        "type": "output",
        "description": "Bridge B output terminal 2."
      },
      {
        "number": "24",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "25",
        "name": "STEP",
        "type": "input",
        "description": "Step input; the rising edge sequences the translator and advances the motor by one increment, and it has an internal pull-down resistor."
      },
      {
        "number": "26",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge pump output, which requires a 1µF, 16V, ceramic capacitor to VIN."
      },
      {
        "number": "27",
        "name": "CP2",
        "type": "passive",
        "description": "Charge pump capacitor terminal; connect a 100nF ceramic capacitor rated for the VIN voltage between CP1 and CP2."
      },
      {
        "number": "28",
        "name": "CP1",
        "type": "passive",
        "description": "Charge pump capacitor terminal; connect a 100nF ceramic capacitor rated for the VIN voltage between CP1 and CP2."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The TSSOP-28EP pin diagram text on page 2 is garbled, so the pinout was taken from the page 3 Pin Fu"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0321,
        "at": "2026-11-21T03:41:35"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/a0cacd630ce070dddc44ed6cd57cefce.pdf",
        "pages": 20,
        "sha256": "0691288e75c73d5d",
        "source_tier": "lcsc",
        "citation": "Monolithic Power Systems datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      },
      "model_origin": {
        "blob_sha256": "b9e231ffd0dc17d13a174b875c5ed26e9f28ef12dd003623bb416f5f955fe0a6",
        "file": "TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm.step",
        "note": "KiCad Package_SO.3dshapes/HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm.step (KiCad 3D library current release, copied from g3) - SUBSTITUTE, same 4.4x9.7 body/0.65 pitch, only hidden EP differs",
        "package_key": "Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm",
        "source": "reef standard-3d",
        "via": "reef standard-3d",
        "page_step_identical": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp6500agf-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          9.7,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b9e231ffd0dc17d13a174b875c5ed26e9f28ef12dd003623bb416f5f955fe0a6",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp6500agf-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          9.7,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8327e8d33dc890570b27a03697e3ce58f0377901b3d61c4c36444c3a05d57f3a",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}