Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP6400DJ-01-LF-Z

Monolithic Power Systems · Monitors & Reset Circuits · TSOT-23-6

MP6400DJ-01-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RESET output Open-drain reset output asserted when SENSE falls below threshold or MR is low; needs a pull-up resistor larger than 10k to the supply line and may be pulled above VCC (up to 6V).
2 GND power_in Ground.
3 MR input Manual reset input, active low, internally connected to VCC through a 90kΩ resistor so it can float; RESET is asserted when it is below 0.25VCC.
4 CDELAY passive Programmable reset delay pin: floating gives 24ms, connection to VCC through 50kΩ to 200kΩ gives 380ms, and a capacitor larger than 150pF to GND sets 2.1ms to 10s.
5 SENSE input Connected to the monitored system voltage (directly or via a resistor divider on the -01 version); RESET is asserted when it falls below the threshold VIT.
6 VCC power_in Supply voltage, 1.8V to 6V recommended, with a 0.1uF ceramic decoupling capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-6
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Range VCC 1.8 6 V 1.8V≤VCC≤6V 4
Supply Current ICC 1.6 3.5 µA VCC = 3.3V, RESET not asserted, MR, RESET, CDELAY open 4
Supply Current ICC 1.85 12 µA VCC = 6V, RESET not asserted, MR, RESET, CDELAY open 4
Low-level Output Voltage VOL 0.3 V 1.3V ≤ VCC < 1.8V, IOL = 0.4mA 4
Low-level Output Voltage VOL 0.4 V 1.8V ≤ VCC ≤ 6V, IOL = 1.0mA 4
Power-up Reset Voltage 0.8 V VOL (max) = 0.2V, IRESET = 15uA, Trise(Vcc)≥15µs/V 4
Negative-going Input Threshold Accuracy VIT -2 1 2 % VSENSE falling slowly 4
Hysteresis on VIT Pin VHYS 1.5 3.5 VIT% 4
MR Internal Pull-up Resistance RMR 50 110 kΩ 4
Input Current at SENSE Pin ISENSE -25 25 nA MP6400DJ-01, VSENSE = VIT 4
RESET Leakage Current 300 nA VRESET = 6V, RESET not asserted 4
MR Logic Low Input VIL 0.25 V 0.25VCC 4
MR Logic High Input VIH 0.7 V 0.7VCC 4
SENSE Maximum Transient Duration tw 17.5 µs VIH = 1.05 VIT, VIL = 0.95 VIT 4
RESET Delay Time td 15 24 34 ms CDELAY = Open 4
RESET Delay Time td 230 380 530 ms CDELAY = VCC (guaranteed by design) 4
RESET Delay Time td 1.3 2.1 3 ms CDELAY = 150pF 4
RESET Delay Time td 61 102 142 ms CDELAY = 10nF (guaranteed by design) 4
MR to RESET Propagation Delay tpHL1 160 ns VIH = 0.7 VCC, VIL = 0.25 VCC 4
High to Low Level RESET Delay, SENSE to RESET tpHL2 17.5 µs VIH = 1.05 VIT, VIL = 0.95 VIT 4
Supply Voltage VCC -0.3 6.5 V 3
SENSE Voltage VSENSE -0.3 6 V 3
All Other Pins -0.3 6.5 V 3
RESET Current IRESET 5 mA 3
Junction Temperature TJ 150 °C 3
Storage Temperature TSTG -65 150 °C 3
Supply Voltage VCC 1.8 6 V 3
Operating Junction Temperature TJ -40 125 °C 3
Thermal Resistance Junction to Case θJC 110 °C/W TSOT23-6, JESD51-7 4-layer board 3

CAD (KiCad official)

  • Symbol: MP6400DJ-01-LF-Z
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mp6400dj-01-lf-z-etched.step / mp6400dj-01-lf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp6400dj-01-lf-z.step / mp6400dj-01-lf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (12 pp, sha256 0d075db4e48b0d2d, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF