main
Ray
Publish 0.1.0
8b7c738
MP6001DN-LF-Z
Monolithic Power Systems · DC-DC Converters · SOIC-8-EP
MP6001DN-LF-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. Power return and reference node. |
| 2 | LINE | input | UV/OV Set Point. Short to ground to turn the controller off; the controller is operational when the voltage at this pin is between 1.2V and 3V. |
| 3 | FB | input | Regulation Feedback Input. Inverting input of the error amplifier, with the non-inverting input internally connected to 1.2V. |
| 4 | COMP | output | Error Amplifier Output. |
| 5 | RT | input | Oscillator Resistor and Synchronous Clock Pin. Connect an external resistor to GND for oscillator frequency setting, and it can be used as a synchronous input from an external oscillator clock. |
| 6 | VCC | power_in | Supply Bias Voltage. A capacitor no less than 1uF is recommended to connect between GND. |
| 7 | VIN | power_in | High Voltage Startup Circuit Supply. VIN needs to be higher than 10V for the high voltage startup circuit to work properly. |
| 8 | SW | output | Output Switching Node. High voltage power N-Channel MOSFET drain output; the internal start bias current is supplied from this pin. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8-EP |
| Category | Power Management |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Line OV Threshold Voltage | 2.85 | 3 | 3.15 | V | VCC = 5.0V | 3 | |
| Line UV Threshold Voltage | 1.16 | 1.21 | 1.26 | V | VCC = 5.0V | 3 | |
| VCC Upper Threshold Voltage | 5.75 | 6 | 6.25 | V | 3 | ||
| VCC Lower Threshold Voltage | 4.3 | 4.5 | 4.7 | V | 3 | ||
| VCC Over Voltage Threshold Voltage | 6.3 | 6.6 | 6.9 | V | 3 | ||
| Feedback Voltage | VFB | 1.16 | 1.21 | 1.26 | V | 3 | |
| Quiescent Supply Current | ICC | 1 | 1.5 | mA | 1.2V < VLINE < 3.2V, VFB = 1.3V | 3 | |
| Minimum Oscillating Frequency | FMIN | 55 | kHz | RT = 100k | 3 | ||
| Maximum Oscillating Frequency | FMAX | 550 | kHz | RT = 10k | 3 | ||
| Line OV Hysteresis | 300 | mV | VCC = 5.0V | 3 | |||
| Line UV Hysteresis | 100 | mV | VCC = 5.0V | 3 | |||
| Feedback Input Current | IFB | 50 | nA | VFB = 1.2V | 3 | ||
| Error Amplifier Gain Bandwidth | GBW | 1 | MHz | 3 | |||
| Error Amplifier DC Gain | AV | 60 | dB | 3 | |||
| Comp Output Source Current | IOH | 2 | mA | VFB = 1.0V, VCOMP = 0.5V | 3 | ||
| Comp Output Sink Current | IOL | 2 | mA | VFB = 1.4V, VCOMP = 2.5V | 3 | ||
| Switch-On Resistance | RON | 0.9 | Ω | VSW = 0.1V | 3 | ||
| Switch Leakage Current | ILK | 1 | µA | VSW = 150V | 3 | ||
| Thermal Shutdown | 150 | °C | 3 | ||||
| Thermal Shutdown Hysteresis | 30 | °C | 3 | ||||
| Current Limit | ILIM | 2 | A | 3 | |||
| Startup Current | Ist | 3 | mA | VIN = 20V, VCC = 4.0V | 3 | ||
| Supply Voltage VCC | VCC | 4.5 | 6 | V | 2 | ||
| Output Voltage VSW | VSW | -0.5 | 150 | V | 2 | ||
| Input Voltage VIN | VIN | 10 | 100 | V | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Free Air Temperature | TA | -40 | 85 | °C | 2 | ||
| Switch Voltage VSW | VSW | -0.5 | 180 | V | 2 | ||
| VIN Voltage | VIN | -0.3 | 120 | V | 2 | ||
| All Other Pins Voltage | -0.3 | 6.5 | V | 2 | |||
| Continuous Power Dissipation | PD | 2.5 | W | TA = +25°C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient SOIC8E | θJA | 50 | °C/W | JESD51-7 4-layer board | 2 | ||
| Thermal Resistance Junction-to-Case SOIC8E | θJC | 10 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
MP6001DN-LF-Z - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
mp6001dn-lf-z-etched.step/mp6001dn-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp6001dn-lf-z.step/mp6001dn-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (13 pp, sha256
29f5d33e1cc24992, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MP6001DN-LF-Z
**Monolithic Power Systems** · DC-DC Converters · SOIC-8-EP
MP6001DN-LF-Z from Monolithic Power Systems, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. Power return and reference node. |
| 2 | LINE | input | UV/OV Set Point. Short to ground to turn the controller off; the controller is operational when the voltage at this pin is between 1.2V and 3V. |
| 3 | FB | input | Regulation Feedback Input. Inverting input of the error amplifier, with the non-inverting input internally connected to 1.2V. |
| 4 | COMP | output | Error Amplifier Output. |
| 5 | RT | input | Oscillator Resistor and Synchronous Clock Pin. Connect an external resistor to GND for oscillator frequency setting, and it can be used as a synchronous input from an external oscillator clock. |
| 6 | VCC | power_in | Supply Bias Voltage. A capacitor no less than 1uF is recommended to connect between GND. |
| 7 | VIN | power_in | High Voltage Startup Circuit Supply. VIN needs to be higher than 10V for the high voltage startup circuit to work properly. |
| 8 | SW | output | Output Switching Node. High voltage power N-Channel MOSFET drain output; the internal start bias current is supplied from this pin. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8-EP |
| Category | Power Management |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Line OV Threshold Voltage | | 2.85 | 3 | 3.15 | V | VCC = 5.0V | 3 |
| Line UV Threshold Voltage | | 1.16 | 1.21 | 1.26 | V | VCC = 5.0V | 3 |
| VCC Upper Threshold Voltage | | 5.75 | 6 | 6.25 | V | | 3 |
| VCC Lower Threshold Voltage | | 4.3 | 4.5 | 4.7 | V | | 3 |
| VCC Over Voltage Threshold Voltage | | 6.3 | 6.6 | 6.9 | V | | 3 |
| Feedback Voltage | VFB | 1.16 | 1.21 | 1.26 | V | | 3 |
| Quiescent Supply Current | ICC | | 1 | 1.5 | mA | 1.2V < VLINE < 3.2V, VFB = 1.3V | 3 |
| Minimum Oscillating Frequency | FMIN | | 55 | | kHz | RT = 100k | 3 |
| Maximum Oscillating Frequency | FMAX | | 550 | | kHz | RT = 10k | 3 |
| Line OV Hysteresis | | | 300 | | mV | VCC = 5.0V | 3 |
| Line UV Hysteresis | | | 100 | | mV | VCC = 5.0V | 3 |
| Feedback Input Current | IFB | | 50 | | nA | VFB = 1.2V | 3 |
| Error Amplifier Gain Bandwidth | GBW | | 1 | | MHz | | 3 |
| Error Amplifier DC Gain | AV | | 60 | | dB | | 3 |
| Comp Output Source Current | IOH | | 2 | | mA | VFB = 1.0V, VCOMP = 0.5V | 3 |
| Comp Output Sink Current | IOL | | 2 | | mA | VFB = 1.4V, VCOMP = 2.5V | 3 |
| Switch-On Resistance | RON | | 0.9 | | Ω | VSW = 0.1V | 3 |
| Switch Leakage Current | ILK | | 1 | | µA | VSW = 150V | 3 |
| Thermal Shutdown | | | 150 | | °C | | 3 |
| Thermal Shutdown Hysteresis | | | 30 | | °C | | 3 |
| Current Limit | ILIM | | 2 | | A | | 3 |
| Startup Current | Ist | | 3 | | mA | VIN = 20V, VCC = 4.0V | 3 |
| Supply Voltage VCC | VCC | 4.5 | | 6 | V | | 2 |
| Output Voltage VSW | VSW | -0.5 | | 150 | V | | 2 |
| Input Voltage VIN | VIN | 10 | | 100 | V | | 2 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 2 |
| Free Air Temperature | TA | -40 | | 85 | °C | | 2 |
| Switch Voltage VSW | VSW | -0.5 | | 180 | V | | 2 |
| VIN Voltage | VIN | -0.3 | | 120 | V | | 2 |
| All Other Pins Voltage | | -0.3 | | 6.5 | V | | 2 |
| Continuous Power Dissipation | PD | | | 2.5 | W | TA = +25°C | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient SOIC8E | θJA | | 50 | | °C/W | JESD51-7 4-layer board | 2 |
| Thermal Resistance Junction-to-Case SOIC8E | θJC | | 10 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `MP6001DN-LF-Z`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `mp6001dn-lf-z-etched.step` / `mp6001dn-lf-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp6001dn-lf-z.step` / `mp6001dn-lf-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Monolithic Power Systems datasheet](docs/mp6001dn-lf-z-datasheet.pdf) (13 pp, sha256 `29f5d33e1cc24992`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mp6001dn-lf-z-datasheet.pdf)