MP5610GQG-Z

{
  "slug": "mp5610gqg-z",
  "version": "0.1.0",
  "type": "component",
  "description": "Monolithic Power Systems Others, QFN-10(1.4x1.8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "others",
    "mp5610gqg-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp5610gqg-z.kicad_sym",
    "mp5610gqg-z.kicad_mod",
    "mp5610gqg-z.glb",
    "mp5610gqg-z.step",
    "mp5610gqg-z.lbr",
    "docs/hero.png",
    "docs/mp5610gqg-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp5610gqg-z-hero.glb",
    "mp5610gqg-z-hero.overlay.json",
    "mp5610gqg-z-etched.glb"
  ],
  "component": {
    "mpn": "MP5610GQG-Z",
    "manufacturer": "Monolithic Power Systems",
    "package": "QFN-10(1.4x1.8)",
    "pin_count": 10,
    "category": "Others",
    "subcategory": "Others",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e749aaa9c30730a259c40a618be2a488.pdf",
    "parts": {
      "symbol": "mp5610gqg-z.kicad_sym",
      "footprint": "mp5610gqg-z.kicad_mod",
      "model_3d": "mp5610gqg-z-hero.glb",
      "model_3d_plain": "mp5610gqg-z-etched.glb",
      "model_3d_step": "mp5610gqg-z-etched.step",
      "model_3d_step_plain": "mp5610gqg-z.step",
      "lbr": "mp5610gqg-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C17648979",
      "digikey": "MP5610GQG-Z-ND",
      "mouser": "946-MP5610GQG-Z"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:55:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MP5610GQG-Z-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "946-MP5610GQG-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: a voltage above the 1.2V EN high threshold enables the IC, while pulling it below 0.4V or leaving it floating disables the IC."
      },
      {
        "number": "2",
        "name": "FBP",
        "type": "input",
        "description": "Positive output step-up converter feedback pin, regulated to a 600mV feedback voltage (±1%) set by an external resistor divider."
      },
      {
        "number": "3",
        "name": "VON",
        "type": "power_out",
        "description": "Charge pump negative output pin; the IC latches off if VON falls below 60% of VOP, and negative overvoltage protection trips at -6.2V typical."
      },
      {
        "number": "4",
        "name": "CP2",
        "type": "passive",
        "description": "Negative output charge pump flying capacitor node 2, connected to CP1 through the flying capacitor (0.1µF to 1µF typical)."
      },
      {
        "number": "5",
        "name": "CP1",
        "type": "passive",
        "description": "Negative output charge pump flying capacitor node 1; connect a flying capacitor between this pin and CP2."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin."
      },
      {
        "number": "7",
        "name": "VOP",
        "type": "power_out",
        "description": "Step-up converter positive output pin; positive overvoltage protection threshold is 6.1V typical and under-voltage protection is at 52% of VREF."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "passive",
        "description": "Step-up converter power switch node, the drain of the internal low-side MOSFET; connect the power inductor between SW and VINP."
      },
      {
        "number": "9",
        "name": "VINP",
        "type": "power_in",
        "description": "Input power pin for the step-up power stage, internally connected to the source node of the internal N-MOSFET."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power pin that supplies internal logic and driver with 2.7V to 5.5V input voltage and must be locally bypassed."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 16,
        "cost_usd": 0.0177,
        "at": "2026-10-28T15:55:17"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/e749aaa9c30730a259c40a618be2a488.pdf",
        "pages": 16,
        "sha256": "323d32e0bb92a25e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp5610gqg-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.4,
          1.8,
          0.57
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18e8e52c79f660f6db601c893a3ba62a564efea84c0c6dd95908b6b785ca7f2d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp5610gqg-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.4,
          1.8,
          0.57
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "da7fc2b410a0e79c7e3242d87fb19e1978caaa9301b21b6a3df5c99383c3b2dd",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}