component
MP5035GJ-Z
Public Made by Adomby adom
MPS Power Distribution Switches, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| mp5035gj-z-etched.glb | 16d ago |
| mp5035gj-z-etched.step | 16d ago |
| mp5035gj-z-hero.glb | 16d ago |
| mp5035gj-z-hero.overlay.json | 16d ago |
| mp5035gj-z.glb | 16d ago |
| mp5035gj-z.kicad_mod | 16d ago |
| mp5035gj-z.kicad_sym | 16d ago |
| mp5035gj-z.lbr | 16d ago |
| mp5035gj-z.step | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
MP5035GJ-Z
MPS · Power Distribution Switches · TSOT-23-6
MP5035GJ-Z from MPS, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input: pull high to enable the MP5035, float or pull to GND to disable it; an internal 2.2MΩ pull-down is present, and a pull-up to VIN through about 300kΩ is suggested for quick start-up, with EN clamped internally by a 5.5V Zener. |
| 2 | SOURCE | power_out | Source of the internal power MOSFET and the output terminal of the IC, rated with VIN and SOURCE at -0.3V to +26V absolute maximum. |
| 3 | GND | power_in | System ground. |
| 4 | ILIMIT | passive | Current-limit setting: a resistor from ILIMIT to ground sets the limit (0.05A to 2A, RLIMIT 22kΩ to 549Ω), and floating ILIMIT selects a fixed 300mA limit. |
| 5 | VIN | power_in | Supply input operating from 2.9V to 22V, requiring a ceramic decoupling capacitor and a wide PCB trace; the absolute maximum rating is -0.3V to +26V. |
| 6 | DV/DT | passive | Connect a capacitor from DV/DT to ground to set the output slew rate and soft-start time; when floating, the slew rate is 2V/ms. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MPS |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Under-voltage lockout rising threshold | VUVLO | 2.55 | 2.7 | 2.85 | V | 4 | |
| DV/DT slew rate | dV/dt | 1.3 | 2 | 2.7 | V/ms | DV/DT floating, TJ = -40°C to +125°C | 4 |
| DV/DT current | IDV/DT | 4.5 | 6.5 | 8.5 | μA | VDV/DT = 0.5V, TJ = -40°C to +125°C | 4 |
| Current limit during normal operation (ILIMIT floating) | ILIMIT_NO | 0.28 | 0.3 | 0.32 | A | Float the ILIMIT pin, TJ = 25°C | 4 |
| Current limit during normal operation (RLIMIT = 549Ω) | ILIMIT_NO | 1.85 | 2 | 2.15 | A | RLIMIT = 549Ω, TJ = 25°C | 4 |
| Current limit during normal operation (RLIMIT = 1.5kΩ) | ILIMIT_NO | 0.7 | 0.75 | 0.8 | A | RLIMIT = 1.5kΩ, TJ = 25°C | 4 |
| Current limit during normal operation (RLIMIT = 5.6kΩ) | ILIMIT_NO | 0.185 | 0.2 | 0.215 | A | RLIMIT = 5.6kΩ, TJ = 25°C | 4 |
| Enable rising threshold | VEN_RISING | 1.86 | 2 | 2.16 | V | 4 | |
| Off-state leakage current | IOFF | 0.1 | 1 | μA | EN = 0V | 4 | |
| VIN, SOURCE pin voltage | -0.3 | 26 | V | 3 | |||
| All other pins voltage | -0.3 | 5.5 | V | 3 | |||
| Junction temperature | -40 | 150 | °C | 3 | |||
| Continuous power dissipation | 1.89 | W | TA = 25°C, TSOT23-6 | 3 | |||
| ESD human body model (HBM) | -2000 | 2000 | V | 3 | |||
| ESD charged device model (CDM) | -750 | 750 | V | 3 | |||
| Supply voltage (VIN) | VIN | 2.9 | 22 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Quiescent supply current | IQ | 550 | μA | EN = high | 4 | ||
| Shutdown supply current | IS | 17 | μA | EN = GND | 4 | ||
| On resistance | RDS(ON) | 82 | mΩ | IOUT = 1A | 4 | ||
| Turn-on delay | tDELAY | 2.5 | ms | From EN rising to VOUT rising, DV/DT floating | 4 | ||
| UVLO hysteresis | VUVLOHYS | 200 | mV | 4 | |||
| Enable hysteresis | VEN_HYS | 350 | mV | 4 | |||
| Enable pull-down resistor | REN_DOWN | 2.2 | MΩ | 4 | |||
| Discharge resistance | RDIS | 540 | Ω | VIN = 5V | 4 | ||
| Thermal shutdown | TSD | 175 | °C | 4 | |||
| Thermal hysteresis | TSD_HYS | 50 | °C | 4 | |||
| Thermal resistance junction-to-case (EV board) | θJC | 23 | °C/W | TSOT23-6, EV5035-J-00A board | 3 |
CAD (KiCad official)
- Symbol:
MP5035GJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp5035gj-z-etched.step/mp5035gj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp5035gj-z.step/mp5035gj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MPS datasheet (17 pp, sha256
c2b22f7548555855, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).