main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp4420hgj-p: viewers · Ray
mp4420hgj-p-etched.glb Publish 0.1.0 · Ray
mp4420hgj-p-etched.step mp4420hgj-p: factory component page (tier=lcsc) · Ray
mp4420hgj-p-hero.glb mp4420hgj-p: hero GLB from the etched model (keeps the MPN mark) · Ray
mp4420hgj-p-hero.overlay.json Publish 0.1.0 · Ray
mp4420hgj-p.glb Publish 0.1.0 · Ray
mp4420hgj-p.kicad_mod Publish 0.1.0 · Ray
mp4420hgj-p.kicad_sym Publish 0.1.0 · Ray
mp4420hgj-p.lbr Publish 0.1.0 · Ray
mp4420hgj-p.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

MP4420HGJ-P

Monolithic Power Systems · DC-DC Converters · TSOT-23-8

MP4420HGJ-P from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PG output Power good is an open-drain output that goes high when the output voltage exceeds 90% of its nominal value and must be pulled up through a resistor (e.g., 100kΩ) to VCC or another voltage source.
2 IN power_in Supply input that operates from a 4V to 36V input rail and requires a C1 input capacitor for decoupling, connected with a wide PCB trace.
3 SW output Switch output node that must be connected with a wide PCB trace; the absolute maximum rating for VSW is -0.3V to 41V.
4 GND power_in System ground and reference for the regulated output voltage, to be connected to the ground plane with copper traces and vias per the layout requirements.
5 BST power_out Bootstrap pin that forms a floating high-side driver supply with a capacitor to SW, where a 20Ω series resistor is strongly recommended; the absolute maximum rating is VBS = VSW + 6V.
6 EN/SYNC input Enable and synchronization input where high enables the regulator and low disables it, an external 200kHz to 2.2MHz clock can synchronize the switching frequency, and the pin is clamped by a 6.5V Zener so that direct connection to a source requires voltage ≤6V.
7 VCC power_out Bias supply output of the internal 5V regulator (4.6V to 5.2V at ICC = 0mA) that must be decoupled with a 0.1µF to 0.22µF capacitor not exceeding 0.22µF.
8 FB input Feedback input connected to the tap of the output resistor divider, which regulates to the 0.8V reference (VFB 780mV to 804mV) and triggers frequency fold-back when the FB voltage falls below 660mV.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package TSOT-23-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (Quiescent) IQ 0.5 0.7 mA VEN = 2V, VFB = 1V 4
HS Switch-ON Resistance RON_HS 90 105 mΩ VBST-SW=5V 4
LS Switch-ON Resistance RON_LS 55 75 mΩ VCC =5V 4
Current Limit ILIMIT 3.2 4.2 5.3 A Under 40% Duty Cycle 4
Oscillator Frequency fSW 320 410 500 kHz VFB=750mV 4
Fold-Back Frequency fFB 70 100 130 kHz VFB<400mV 4
Maximum Duty Cycle DMAX 92 95 % VFB=750mV, 410kHz 4
Sync Frequency Range fSYNC 0.2 2.4 MHz 4
Feedback Voltage VFB 780 792 804 mV 4
Feedback Current IFB 10 100 nA VFB=820mV 4
EN Rising Threshold VEN RISING 1.15 1.4 1.65 V 4
EN Falling Threshold VEN FALLING 1.05 1.25 1.45 V 4
EN Input Current IEN 4 6 μA VEN=2V 4
EN Input Current IEN 0 0.2 μA VEN=0 4
VIN Under-Voltage Lockout Threshold-Rising INUVRISING 3.3 3.5 3.7 V 4
VIN Under-Voltage Lockout Threshold-Falling INUVFALLING 3.1 3.3 3.5 V 4
VCC Regulator VCC 4.6 4.9 5.2 V ICC=0mA 4
VCC Load Regulation 1.5 4 % ICC=5mA 4
Soft-Start Period tSS 0.55 1.45 2.45 ms VOUT from 10% to 90% 4
Thermal Shutdown 150 170 °C 4
PG Rising Threshold PGVth RISING 86.5 90 93.5 % as percentage of VFB 4
PG Falling Threshold PGVth FALLING 80.5 84 87.5 % as percentage of VFB 4
PG Rising Delay PGTd_RISING 40 90 160 μs 5
PG Falling Delay PGTd_FALLING 30 55 95 μs 5
PG Sink Current Capability VPG Sink 0.1 0.3 V Sink 4mA 5
PG Leakage Current ILKG_PG 10 100 nA 5
Input Voltage (absolute maximum) VIN -0.3 40 V 3
Switch Voltage (absolute maximum) VSW -0.3 41 V 3
All Other Pins (absolute maximum) -0.3 6 V 3
Continuous Power Dissipation 1.25 W TA = +25°C, TSOT23-8 3
Junction Temperature 150 °C 3
Lead Temperature 260 °C 3
Storage Temperature -65 150 °C 3
Continuous Supply Voltage VIN 4 36 V 3
Output Voltage VOUT 0.8 V Upper limit printed as 0.9xVIN 3
Operating Junction Temperature TJ -40 125 °C 3
Junction-to-Ambient Thermal Resistance θJA 100 °C/W Measured on JESD51-7, 4-layer PCB 3
Junction-to-Case Thermal Resistance θJC 55 °C/W Measured on JESD51-7, 4-layer PCB 3
Supply Current (Shutdown) ISHDN 8 μA VEN = 0V 4
Switch Leakage ILKG SW 1 μA VEN = 0V, VSW =12V 4
Minimum ON Time tON MIN 70 ns 4
EN Threshold Hysteresis VEN_HYS 150 mV 4
VIN Under-Voltage Lockout Threshold-Hysteresis INUVHYS 200 mV 4
Thermal Hysteresis 30 °C 4
PG Threshold Hysteresis PGVth_HYS 6 % as percentage of VFB 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 4 GND System Ground. This pin is the reference ground of the regulated output voltage, and PCB layout requires special care. For best results, connect to GND with copper traces and vias. 12

CAD (KiCad official)

  • Symbol: MP4420HGJ-P
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: mp4420hgj-p-etched.step / mp4420hgj-p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp4420hgj-p.step / mp4420hgj-p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (20 pp, sha256 c68628245baef462, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF